Habow 24Pcs Power-Function Technic-Parts Kit

Contents

Habow Power-Function Technic-Parts Kit Instruction Manual

Model: 24Pcs Power-Function Technic-Parts Kit

Brand: Habow

Introduction

Thank you for choosing the Habow 24Pcs Power-Function Technic-Parts Kit. This kit provides powerful energy and remote control capabilities for your Technic projects, offering full compatibility with all major building block brands. It is designed to enhance, upgrade, and repair various Technic creations such as roller coasters, EV3 Mindstorms, cranes, trains, RC cars, excavators, motorcycles, and jeeps.

Important Safety Warnings

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Not suitable for children under 3 years due to small parts which may present a choking hazard.
  • Adult supervision is recommended during assembly and use.
  • Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
  • Ensure batteries are inserted with correct polarity.
  • Remove batteries from the product if it is not to be used for an extended period.

Package Contents

The Habow 24Pcs Power-Function Technic-Parts Kit includes the following components:

Overview of all Habow Power-Function Technic-Parts Kit components
Figure 1: All components included in the Habow Power-Function Technic-Parts Kit.
  • 1 x M Motor 8883
  • 2 x L Motor 88003
  • 2 x XL Motor 8882
  • 1 x AA Battery Box 8881
  • 1 x IR Speed Remote Control 8879
  • 1 x IR Receiver 8884
  • 1 x Control Switch 8869
  • 1 x Power Functions Light 8870
  • 2 x Extension Wire 8886 (9.8 inches each)
  • Accessory pack (includes gears and other small parts)

Specifications

Product Specifications
FeatureDetail
Block SizeSmall building block (Compatible with Lego)
MaterialPlastic
GenderUnisex
Recommended Age14+ years
OriginMainland China
Package Weight6.0 kg
Package Dimensions (L x W x H)12 cm x 12 cm x 12 cm

Motor Specifications

Specifications for M, L, and XL Power Function Motors
Figure 2: Detailed specifications for the M, L, and XL Power Function Motors.
Motor Performance
Motor TypeNo-Load SpeedMaximum Torque
Power Function M Motor 8883380 rpm40 mN·m
Power Function L Motor 88003405 rpm45.4 mN·m
Power Function XL Motor 8882220 rpm90.4 mN·m

Setup Instructions

1. Battery Installation

IR Speed Remote Control 8879:

Battery installation and controls for IR Speed Remote Control 8879
Figure 3: Battery compartment and control layout of the IR Speed Remote Control 8879.
  • The remote control requires 3*AAA batteries (not included).
  • Open the battery compartment cover on the back of the remote control.
  • Insert the batteries, ensuring correct polarity (+/-).
  • Close the battery compartment cover securely.

AA Battery Box 8881:

Battery installation and features of AA Battery Box 8881
Figure 4: Battery compartment and interface details of the AA Battery Box 8881.
  • The battery box requires 6*AA batteries (not included).
  • Open the battery compartment cover.
  • Insert the batteries, ensuring correct polarity (+/-).
  • Close the battery compartment cover securely.

2. Connecting Components

IR Receiver 8884 with motor and power interfaces
Figure 5: IR Receiver 8884 showing motor and power interfaces.
Control Switch 8869, Extension Wire 8886, and Power Functions Light 8870
Figure 6: Control Switch 8869, Extension Wire 8886, and Power Functions Light 8870 connections.
  • Connect Power Source: Plug the AA Battery Box 8881 into the Power Interface of the IR Receiver 8884 or directly into a motor/light if not using remote control.
  • Connect Motors/Lights: Plug the M, L, or XL Motors (8883, 88003, 8882) or the Power Functions Light 8870 into the Motor Interface(s) of the IR Receiver 8884.
  • Using Extension Wires: If components are far apart, use the Extension Wire 8886 to bridge the connection between the power source/receiver and the motor/light.
  • Using Control Switch: The Control Switch 8869 can be used to manually control a motor. Connect the power source to its Motor/Power Interface and the motor to its Motor Interface.

3. Setting IR Frequencies

Both the IR Speed Remote Control 8879 and the IR Receiver 8884 have adjustable frequencies (1, 2, 3, 4). For proper operation, the remote control and receiver must be set to the same frequency.

  • Locate the frequency selector switch on both the remote control and the IR Receiver.
  • Set both switches to the desired matching frequency (e.g., '1' on both).
  • The control distance for the IR system is approximately 33 feet (10 meters).

Operating Instructions

1. Using the IR Speed Remote Control 8879

  • Ensure the remote control and IR Receiver are set to the same frequency.
  • The remote control features two dials, each controlling a motor connected to the IR Receiver.
  • Rotate a dial to increase or decrease the motor's speed.
  • The center buttons allow for Forward and Reverse movement.
  • The 'Stop' buttons will halt the motor's operation.
  • An indicator light on the remote control will show activity.

2. Using the AA Battery Box 8881

  • The battery box has a Forward/Stop/Backward switch.
  • Slide the switch to 'Forward' to power connected components in one direction.
  • Slide to 'Backward' for the opposite direction.
  • Set to 'Stop' to cut power.
  • An indicator light on the battery box will illuminate when powered on.

3. Using the Control Switch 8869

  • The Control Switch 8869 has a 'Putter' mechanism.
  • Move the putter to activate or deactivate the connected motor.
  • This switch provides direct manual control without the need for an IR receiver.

4. Using Power Functions Light 8870

  • Connect the Power Functions Light 8870 to a power source (e.g., Battery Box or IR Receiver).
  • The light will turn on when power is supplied and turn off when power is cut.
  • Use the included block for fixation to integrate the light into your building block models.

Maintenance

  • Cleaning: Wipe components with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the kit in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: Remove batteries from all components if the kit will not be used for an extended period to prevent leakage.
  • Inspection: Periodically check wires and connectors for any signs of wear or damage. Replace damaged parts if necessary.

Troubleshooting

Common Issues and Solutions
ProblemPossible CauseSolution
Motor/Light not respondingNo power, incorrect battery installation, loose connection, IR frequency mismatch (for remote control)Check batteries in battery box/remote. Ensure correct polarity. Verify all connections are secure. For IR control, ensure remote and receiver are on the same frequency.
Weak motor performanceLow batteries, motor overloadedReplace batteries. Reduce the load on the motor or use a more powerful motor (e.g., XL Motor for heavier tasks).
IR Remote Control not workingLow/dead batteries, IR frequency mismatch, obstruction between remote and receiver, too far from receiverReplace AAA batteries. Set remote and receiver to the same frequency. Ensure clear line of sight. Stay within 33 feet (10 meters) of the receiver.
Components not fitting togetherIncorrect orientation, incompatible partsEnsure parts are aligned correctly. While compatible with major brands, some specific parts might have tighter tolerances. Do not force connections.

User Tips

  • Experiment with Motors: The kit includes M, L, and XL motors. Experiment with different motor types for various applications. M motors are good for general use, L motors offer a balance of speed and torque, and XL motors provide high torque for heavy-duty applications.
  • Cable Management: Use the extension wires and integrate them neatly into your builds to prevent tangles and ensure smooth operation.
  • Frequency Channels: If you are using multiple IR receivers in close proximity, set them to different frequency channels (1-4) to avoid interference.
  • Creative Builds: Don't limit yourself to existing designs. This kit is designed to empower your creativity in building and upgrading custom Technic models.

Warranty and Support

Habow products are manufactured to high-quality standards. For any issues or support inquiries, please contact your retailer or the Habow customer service team. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.