1. Product Overview
The SP09 Car Sun Visor Bluetooth Hands-Free Speakerphone is designed to provide a safe and convenient communication solution while driving. It features Bluetooth connectivity for hands-free calling, voice broadcast functions, and automatic power management.
Package Contents
- 1 x SP09 Host Unit
- 1 x USB Car Charger
- 1 x USB Charging Cable
- 1 x Sunshade Clip
- 1 x User Manual
- 1 x Neutral English Packaging

Image: SP09 Speakerphone and its packaging.
Device Layout

Image: Labeled diagram of the SP09 speakerphone showing Microphone, Indicator light, Charging Interface, Volume control, Hook up phone button, On/Off switch, Sunshade back clip, and Speaker.
- Microphone: For hands-free communication.
- Indicator Light: Displays device status (e.g., charging, connected).
- Charging Interface: Micro USB port for charging.
- Volume Control (+/-): Adjusts speaker volume.
- Hook Up Phone Button: Manages calls (answer, end, redial).
- On/Off Switch: Powers the device on or off.
- Sunshade Back Clip: For mounting the device to a car sun visor.
- Speaker: For audio output.
2. Setup
Charging the Device
Before first use, fully charge the SP09 speakerphone. Connect the provided USB charging cable to the Micro charging port on the device and the other end to the USB car charger or any standard USB power source. The indicator light will show charging status.

Image: Detail of the Micro charging port on the SP09 speakerphone.
- Charging Time: Approximately 2 hours for a full charge.
- The device has a built-in charge and discharge protection circuit.
Installation
Attach the SP09 speakerphone to your car's sun visor using the integrated sunshade clip. Ensure it is securely fastened and does not obstruct your view while driving.

Image: The SP09 speakerphone installed on a car sun visor, illustrating its auto power on and auto connect feature.
Initial Pairing
- Slide the On/Off switch to the 'ON' position. The indicator light will flash, indicating it's in pairing mode.
- On your mobile phone, enable Bluetooth and search for available devices.
- Select 'SP09' from the list of devices.
- Once connected, the indicator light will change, and you may hear a confirmation tone.
The SP09 supports advanced multi-point connection, allowing it to connect to two mobile phones simultaneously.
3. Operating Instructions
Power On/Off
- Power On: Slide the On/Off switch to 'ON'.
- Power Off: Slide the On/Off switch to 'OFF'.
Automatic Startup and Connection
The SP09 features a vibration sensor. When the device is clipped to the sun visor and you open the car door, the vibration will automatically power on the speakerphone and attempt to connect to the last paired mobile phone(s).

Image: Illustration of the automatic startup and connection feature when a car door is opened.
Making and Receiving Calls

Image: Demonstrating one-click answering of incoming calls for safe and convenient driving.
- Answer Call: Press the 'Hook Up Phone' button once when an incoming call is announced.
- End Call: Press the 'Hook Up Phone' button once during a call.
- Reject Call: Press and hold the 'Hook Up Phone' button for a few seconds when an incoming call is announced.
- Redial Last Number: Double-click the 'Hook Up Phone' button when not on a call.
Volume Control
Use the '+' and '-' buttons on the device to adjust the call volume or media playback volume.
Voice Broadcast Functions
The SP09 supports full voice broadcast for various notifications:
- Incoming Call Numbers: Announces the number of the incoming caller.
- Low Power Reminders: Notifies you when the battery is low.
- Bluetooth Connection Status: Provides reminders about Bluetooth connection and disconnection.
- Mobile Navigation: Broadcasts navigation instructions from your phone's GPS app.
- Music Playback: Supports audio playback from mainstream music apps.

Image: The SP09 speakerphone broadcasting an incoming call number.

Image: The SP09 speakerphone broadcasting mobile navigation instructions.
Apple Siri Voice Control
The device supports Apple Siri voice control. Refer to your phone's instructions for activating Siri via a Bluetooth device.
Automatic Shutdown Function
To conserve power, the SP09 will automatically shut down within 5 minutes if your paired mobile phone moves beyond the Bluetooth transmission range (approximately 10 meters).

Image: Diagram illustrating the automatic shutdown feature when the phone is out of range.
4. Maintenance
- Keep the device dry. Avoid exposure to moisture or liquids.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the device in a cool, dry place when not in use for extended periods.
- The built-in 550mAh polymer battery has a protection board for safe charging and discharging. Avoid extreme temperatures to prolong battery life.
5. Troubleshooting
- Device not powering on: Ensure the battery is charged. Connect to a power source and try again.
- Cannot pair with phone:
- Make sure the SP09 is turned on and in pairing mode (indicator light flashing).
- Ensure Bluetooth is enabled on your phone.
- Move the phone closer to the SP09.
- Try restarting both the SP09 and your phone.
- No audio or poor sound quality:
- Check the volume level on both the SP09 and your phone.
- Ensure the SP09 is securely connected to your phone.
- Check for any obstructions blocking the speaker or microphone.
- Automatic shutdown occurring too frequently:
- Ensure your phone remains within the 10-meter Bluetooth transmission range.
- If the issue persists, ensure the device is fully charged.
6. Specifications

Image: Diagram showing the product parameters of the SP09 speakerphone.
| Feature | Specification |
|---|---|
| Model No. | SP09 |
| Dimensions | 100mm x 60mm x 21mm |
| Color | Black |
| Bluetooth Version | V 4.2 + EDR |
| Bluetooth Transmission Distance | 10 meters |
| Battery Capacity | 550mAh |
| Charging Time | Approximately 2 hours |
| Call Time | Approximately 10 hours |
| Standby Duration | Up to 500 hours |
| Speaker | 4Ω 2W, High-definition stereo sound |
| Noise Reduction | DSP noise suppression, CVC8.0 dual noise reduction |
| Additional Features | A2DP, One-click hook, Dual-machine connection, Vibration boot, Voice Broadcast, Apple Siri voice control |

Image: Icons representing key features such as A2DP, one-click hook, dual connection, super long standby, Bluetooth V4.2, high quality speaker, vibration boot, and voice broadcast.
7. User Tips
- Optimal Placement: For the best audio quality and microphone pickup, ensure the speakerphone is positioned clearly on the sun visor, facing you, without any obstructions.
- Battery Management: While the device has a long standby time, regular charging (e.g., once a week for moderate use) will ensure it's always ready when you need it.
- Dual Phone Use: If connecting two phones, remember that only one phone can be actively used for calls or media at a time. The device will prioritize incoming calls.
- Voice Command Efficiency: When using Siri voice control, speak clearly and directly towards the speakerphone's microphone for best recognition.
8. Warranty and Support
For specific warranty information, please refer to the product packaging or contact the seller directly. If you encounter any issues or require technical assistance, please reach out to the point of purchase or the manufacturer's customer support channels.