1. Introduction
The PROZOR 192kHz Digital to Analog Audio Converter (DAC) is designed to convert Coaxial or Toslink digital audio signals into analog L/R audio. It also features a built-in Bluetooth 5.0 receiver module, allowing for wireless audio streaming from mobile devices. This versatile device enables connection to external audio equipment such as headphones, speakers, or amplifiers, enhancing your audio experience.
Key Features:
- Built-in Bluetooth V5.0 receiver module for mobile device audio streaming.
- Converts Coaxial/Toslink/Optical digital audio to analog L/R audio.
- Includes a 3.5mm audio output for direct headphone connection and headphone amplifier function.
- Comes with an IR wireless remote control for easy adjustment of volume, input selection (Coaxial/Toslink), mute, and power ON/OFF.
- Supports a high sampling rate of 192kHz and 24-bit audio.
- Durable aluminum metal casing, lightweight and compact, designed for anti-interference to ensure pure and clear sound.
2. Package Contents
Please check the package contents upon opening to ensure all items are present and in good condition:
- 1 x PROZOR 192kHz Bluetooth DAC Converter
- 1 x IR Remote Control (Note: Battery not included)
- 1 x 1.5m Toslink Cable
- 1 x 1m Coaxial Cable
- 1 x USB Cable (for power)
- 1 x User Manual
3. Product Overview
Front Panel Controls:
- IR Receiver: For receiving signals from the remote control.
- BT Indicator: Lights up when Bluetooth input is selected and connected.
- Coaxial/Toslink Indicators: Light up according to the selected digital input.
- Select Button: Toggles between Coaxial, Toslink, and Bluetooth inputs.
- VOL - / VOL + Buttons: Adjust the output volume.
- PW/Mute Button: Press to mute/unmute audio; long press to power ON/OFF.
Rear Panel Ports:
- USB Power: Micro USB port for 5V power input.
- BT Antenna: Connector for the Bluetooth antenna.
- Toslink Input: Optical digital audio input.
- Coaxial Input: Coaxial digital audio input.
- L/R Output: Analog stereo RCA outputs (Left and Right).
- 3.5mm Jack: Analog 3.5mm headphone output.
4. Setup Instructions
Follow these steps to set up your PROZOR DAC converter:
- Connect Power: Connect the provided USB cable to the 'USB Power' port on the DAC and plug the other end into a 5V USB power adapter (not included) or a USB port on your TV/computer.
- Attach Bluetooth Antenna: Screw the Bluetooth antenna firmly into the 'BT' connector on the rear panel.
- Connect Audio Source:
- For digital audio sources (e.g., TV, Blu-ray player, game console), connect a Coaxial cable to the 'Coaxial Input' or a Toslink (optical) cable to the 'Toslink Input' on the DAC.
- Important: Ensure your source device's audio output is set to PCM/LPCM format. This converter does not support 5.1 channel audio formats like Dolby or DTS.
- Connect Audio Output:
- For analog speakers or an amplifier, connect RCA cables from the 'L/R Output' ports on the DAC to the corresponding input ports on your audio system.
- For headphones, plug your 3.5mm headphones into the '3.5mm Jack' output.
- Bluetooth Connection (Optional):
- Turn on the DAC.
- Press the 'Select' button on the front panel or the 'BT' button on the remote until the 'BT' indicator lights up.
- On your mobile device (phone, tablet, PC), enable Bluetooth and search for available devices.
- Select 'PROZOR RX5.0' from the list to pair. Once paired, the BT indicator will remain solid.
5. Operating Instructions
Using the Front Panel Controls:
- Power ON/OFF: Long press the 'PW/Mute' button to turn the device on or off.
- Input Selection: Press the 'Select' button to cycle through Coaxial, Toslink, and Bluetooth inputs. The corresponding indicator light will illuminate.
- Volume Adjustment: Use the 'VOL +' and 'VOL -' buttons to increase or decrease the output volume.
- Mute: Short press the 'PW/Mute' button to mute or unmute the audio.
Using the IR Remote Control:
The included IR remote control provides convenient access to the DAC's functions. Ensure the remote is pointed towards the IR receiver on the front panel of the converter for optimal signal reception.
- ON/OFF: Press 'ON' to power on, 'OFF' to power off.
- Volume Control: Use the 'VOL +' and 'VOL -' buttons to adjust the volume.
- Mute: Press the 'Mute' button to silence or restore audio.
- Input Selection: Press 'Coaxial' or 'Toslink' to directly select the desired digital input. Press 'BT' to select Bluetooth input.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosol sprays.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping or subjecting the device to strong impacts.
- Ventilation: Ensure proper ventilation around the device to prevent overheating.
7. Troubleshooting
| Problem | Possible Solution |
|---|---|
| No sound output from speakers/headphones. |
|
| Bluetooth device cannot pair or connect. |
|
| Remote control not working. |
|
| Optical/Coaxial cable cannot be used as an output. | The Toslink and Coaxial ports on this device are inputs only. They are designed to receive digital audio signals from source devices, not to transmit them. |
| Cannot connect a Bluetooth speaker to the DAC. | This device functions as a Bluetooth receiver, meaning it receives audio from a Bluetooth source (like a phone) and outputs it via its analog ports. It is not a Bluetooth transmitter and cannot send audio to Bluetooth speakers or headphones. |
| PS4 Pro/Slim not working with the converter. | PS4 Pro and PS4 Slim models typically lack an optical fiber output interface, which is required for digital audio connection to this converter. Please check your PS4 model's available audio outputs. |
8. User Tips
- Always check your TV's audio settings first: Many common issues are resolved by ensuring the TV's digital audio output is set to PCM/LPCM.
- Understand the Bluetooth function: Remember this device is a Bluetooth receiver, not a transmitter. It takes audio from your phone/tablet and sends it to wired speakers/headphones, it won't connect to wireless speakers.
- Power Source: While a TV's USB port can power the DAC, a dedicated 5V USB power adapter might provide more stable power, especially if you experience any intermittent audio issues.
9. Specifications
| Attribute | Value |
|---|---|
| Bluetooth Version | 5.0 Version |
| Support Audio Format | PCM |
| Signal-to-Noise Ratio | 105DB |
| Separating Degree (1KHZ) | 94DB |
| THD+N | -90DB |
| Total Harmonic Distortion (THD) | 10Hz~20KHz 0.25-0.065% |
| Blocking Time | 0.577Fs |
| Sampling Rate | 32~192 KHz |
| Bit Rate | 16~24 Bit |
| Input Electrical Level | ±0.3V |
| Output Electrical Level | 3V |
| Maximum Output Power | 0.3W |
| Earphone Output Power | 0-250mW |
| Output Impedance | 10 ohms |
| Working Voltage | +5V |
| Dimension | 4.54" x 2.45" x 0.76" (11.53cm x 6.22cm x 1.93cm) |
| Weight | 180g |
| Material | Metal |
| Certification | CE |
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.
