Introduction
The SPIGEN MagFit Car Mount (ACP02791) is designed to securely hold your MagSafe-compatible smartphone in your vehicle. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your car mount.
Package Contents
Please verify that all components are present in your package:
- MagFit Magnetic Mount Head
- Air Vent Clip with Ball Joint
Setup and Installation
- Assemble the Mount:
Align the ball joint of the air vent clip with the socket on the back of the magnetic mount head. Push the ball joint firmly into the socket until it clicks into place. Tighten the collar around the ball joint to secure the connection and allow for angle adjustment.
Figure 2: Rear view of the assembled car mount, highlighting the air vent clip and ball joint mechanism. - Attach to Car Air Vent:
Locate a suitable air vent in your vehicle. Ensure the vent blades are horizontal and sturdy enough to support the mount and your phone. Push the air vent clip onto one of the vent blades. Rotate the locking mechanism on the clip (indicated by the arrow and lock/unlock symbols) to secure it firmly to the vent blade. Ensure the mount is stable and does not wobble.
Figure 3: Angled rear view showing the Spigen logo and the air vent clip with its locking mechanism.
Operating Instructions
- Attaching Your Device:
Ensure your smartphone is MagSafe-compatible or has a MagSafe-compatible case. Simply bring the back of your device close to the magnetic surface of the mount. The magnets will automatically align and secure your phone in place.
Figure 4: Front view of the assembled MagFit Car Mount, ready to hold a device. - Adjusting Viewing Angle:
Loosen the collar around the ball joint slightly. Adjust your phone to the desired viewing angle (portrait or landscape). Tighten the collar to lock the angle in place.
- Detaching Your Device:
Gently pull your smartphone away from the magnetic surface to detach it.
Maintenance
To maintain the performance and appearance of your car mount:
- Clean the magnetic surface and the mount body with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish or magnetic properties.
- Ensure the air vent clip is free of dust or debris for a secure grip.
Troubleshooting
- Mount feels loose on the vent: Ensure the air vent clip's locking mechanism is fully engaged. Try attaching it to a different, sturdier vent blade.
- Phone does not attach securely: Verify your phone or case is MagSafe-compatible. Ensure there is no debris between the phone and the magnetic surface.
- Mount head wobbles: Tighten the collar around the ball joint to secure the magnetic head's position.
Specifications
| Feature | Detail |
|---|---|
| Model | ACP02791 |
| Brand | SPIGEN |
| Product Type | MagFit Magnetic Car Mount |
| Color | Black |
| Package Dimensions (L x W x H) | 27 cm x 17 cm x 5 cm |
| Package Weight | 0.3 kg |
User Tips
Based on common user experiences, consider the following tips for optimal use:
- For best stability, ensure the air vent clip is securely fastened to a robust, horizontal vent blade. Avoid flimsy or vertical vents.
- If your phone has a thick case, ensure it is MagSafe-compatible for the strongest magnetic connection.
- Periodically check the tightness of the ball joint collar to prevent the mount from shifting during driving.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official SPIGEN website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
