KKMOON 5-Band Car Parametric Equalizer

Contents

KKMOON 5-Band Car Parametric Equalizer User Manual

Enhance your car audio experience with precise sound control.

1. Product Overview

The KKMOON 5-Band Car Parametric Equalizer is a powerful audio tool designed to fine-tune your car's sound system. It features five adjustable frequency bands, allowing for precise control over your audio output. This equalizer helps to effectively reduce noise and improve overall sound quality, providing a more immersive listening experience for music, movies, or games.

Front view of the KKMOON 5-Band Car Parametric Equalizer
Figure 1: Front view of the 5-Band Car Parametric Equalizer.

Key features include:

  • Accurate Sound Tuning: Five adjustable frequency bands (10KHz, 2.2KHz, 750Hz, 315Hz, 100Hz) for precise audio customization.
  • Versatile Output: Six-channel output, including four amplifier channels and two subwoofer channels.
  • Subwoofer Control: Separate subwoofer output and adjustment function for enhanced bass.
  • Durable Construction: Made from high-quality plastics and metal with fine workmanship.
  • Illuminated Knobs: Stylish and convenient illuminated control knobs for easy operation in various lighting conditions.

2. Setup and Installation

Proper installation is crucial for optimal performance. Follow the connection diagram carefully.

2.1 Connection Diagram

Simplified connection diagram for the car equalizer
Figure 2: Simplified connection diagram showing audio input, amplifier outputs, subwoofer output, and power connections.

Connect the corresponding interfaces as shown in the diagram. Ensure all connections are secure to prevent signal loss or interference.

2.2 Panel Layout and Connections

Detailed front and back panel layout with labeled controls and ports
Figure 3: Detailed front and back panel layout with labeled controls and ports.

Back Panel Connections:

  • SUB Output: Connect to your subwoofer amplifier.
  • Rear Output (R/L): Connect to your rear amplifier channels.
  • Front Output (R/L): Connect to your front amplifier channels.
  • AUX Input (R/L): Auxiliary audio input.
  • CD Input (R/L): Main audio input, typically from your head unit.
  • GND: Ground connection.
  • DC 12V: Main power input (12V).
  • REM: Remote turn-on wire, connects to your head unit's remote output to power on/off with the car stereo.

Front Panel Controls:

  • Frequency Bands (10KHz, 2.2KHz, 750Hz, 315Hz, 100Hz): Rotary knobs to adjust the gain for each frequency band.
  • CD/AUX Mode Switch: Toggles between CD input and AUX input.
  • FADER: Adjusts the balance between front and rear outputs.
  • SUB EQ: Equalization control for the subwoofer output.
  • SUB VOL: Volume control for the subwoofer output.
  • Overall VOL: Master volume control for all outputs.

3. Operating Instructions

Once installed, you can begin tuning your audio system using the equalizer's controls.

3.1 Power On/Off

The equalizer will power on automatically when your car's head unit is turned on, provided the REM wire is correctly connected. It will power off when the head unit is turned off.

3.2 Input Selection

Use the CD/AUX mode switch on the front panel to select between your primary audio source (CD Input) and an auxiliary source (AUX Input).

3.3 5-Segment EQ Tuning

Close-up of the 5-segment EQ tuning knobs with blue illumination
Figure 4: Illuminated 5-segment EQ tuning knobs.

Adjust the rotary knobs for each of the five frequency bands (10KHz, 2.2KHz, 750Hz, 315Hz, 100Hz) to boost or cut the sound at those specific frequencies. Each segment can be controlled by approximately ±12dB to achieve your desired sound effect.

  • 100Hz: Controls the very low bass frequencies.
  • 315Hz: Controls the mid-bass frequencies.
  • 750Hz: Controls the lower midrange frequencies.
  • 2.2KHz: Controls the upper midrange frequencies.
  • 10KHz: Controls the high treble frequencies.

3.4 Subwoofer Control

Illustration of the separate subwoofer output and adjustment function
Figure 5: Subwoofer output and adjustment for enhanced bass.

Use the SUB VOL knob to adjust the overall volume of the subwoofer output. The SUB EQ knob allows for further equalization specifically for the subwoofer, enabling you to add more shocking bass to your car sound.

3.5 Volume and Fader Control

  • Overall VOL: Adjusts the master volume level for all connected outputs.
  • FADER: Balances the audio output between the front and rear speakers.

4. Maintenance

To ensure the longevity and optimal performance of your equalizer, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to wipe the exterior of the unit. Avoid using harsh chemicals or abrasive cleaners.
  • Environment: Keep the equalizer in a dry environment, away from direct sunlight, extreme temperatures, and excessive moisture.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.

5. Troubleshooting

If you encounter any issues with your equalizer, refer to the following common troubleshooting steps:

  • No Power: Check the 12V DC, GND, and REM connections. Ensure the REM wire is receiving a signal from the head unit.
  • No Sound: Verify all audio input and output cables are correctly connected and secure. Check the input source selection (CD/AUX switch). Ensure the 'Overall VOL' is not set to minimum.
  • Distorted Sound: Reduce the gain on individual frequency bands if they are set too high. Check for proper grounding to minimize noise. Ensure the input signal is not overdriven.
  • Noise/Hiss: Check for proper grounding. Ensure all cables are high quality and routed away from power cables to prevent interference. Adjust EQ bands to reduce frequencies that might be amplifying existing noise.
Graph demonstrating sound quality improvement before and after commissioning the equalizer
Figure 6: Visual representation of sound quality improvement after proper equalization.

6. Specifications

Feature Specification
Color Black
Material Plastics + Metal
Equalizer Bands 5 Bands (10KHz, 2.2KHz, 750Hz, 315Hz, 100Hz)
EQ Control Range ±12dB per band
Output Channels 6-channel (4 amplifier, 2 subwoofer)
Item Size 185 * 120 * 30mm (7.3 * 4.7 * 1.2in)
Item Weight 517g (1.1lb)
Package Size 210 * 135 * 30mm (8.3 * 5.3 * 1.2in)
Package Weight 583g (1.3lb)
Certification CE
Diagram showing the product dimensions
Figure 7: Product dimensions.
Internal view of the circuit board, highlighting excellent workmanship, large capacitance, and transformer
Figure 8: Internal components showing quality materials and workmanship.

7. Warranty and Support

KKMOON is committed to providing high-quality products. If you experience any quality problems with your equalizer, please contact our support team. We will repair or exchange the product for you, provided it is returned in its original condition.

For any product damaged during transit, please contact us immediately upon receipt. We will assist you in resolving the issue.

8. User Tips

  • Start with Flat Settings: When first setting up, begin with all EQ bands at their neutral (0dB) position. Adjust gradually to hear the impact of each frequency change.
  • Listen Critically: Make small adjustments and listen to various types of music to find the sound profile that best suits your preferences and your car's acoustics.
  • Avoid Over-Boosting: Excessive boosting of any frequency band can lead to distortion and potentially damage your speakers. Aim for subtle enhancements.
  • Subwoofer Integration: Use the dedicated SUB VOL and SUB EQ controls to seamlessly blend your subwoofer's output with the main speakers for a balanced sound.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.