Introduction
Thank you for choosing the Attack Shark X6 Tri-Mode Gaming Mouse. This manual provides detailed instructions for setting up, operating, and maintaining your new gaming mouse. The X6 features a high-performance PixArt PAW3395 sensor, versatile tri-mode connectivity, and a magnetic charging base with customizable RGB lighting, designed to enhance your gaming and productivity experience.
Package Contents
Please check the package to ensure all items are present:
- 1 × Attack Shark X6 Mouse
- 1 × 2.4G Receiver
- 1 × User Manual
- 1 × Type-C Charging Cord
- 1 × Magnetic Charging Base
- 1 × Anti-slip stickers
Setup Guide
1. Initial Charging
Before first use, it is recommended to fully charge the mouse. Connect the Type-C charging cord to the magnetic charging base, and then place the mouse onto the base. The mouse features magnetic fast charging. A full charge typically takes 2-3 hours and provides approximately 65 hours of continuous working life.
2. Connecting the Mouse (Tri-Mode Connection)
The Attack Shark X6 supports three connection modes: Wired, 2.4G Wireless, and Bluetooth 5.2. Use the switch located on the bottom of the mouse to select your desired mode.
2.1. Wired Connection
- Connect the Type-C charging cord directly from the mouse to your computer's USB port.
- The mouse will automatically switch to wired mode and be ready for use.
2.2. 2.4G Wireless Connection
- Locate the 2.4G receiver (dongle) in the package.
- Plug the 2.4G receiver into an available USB port on your computer.
- Slide the mode switch on the bottom of the mouse to the '2.4G' position.
- The mouse should connect automatically. The indicator light will show a green light for 2.4G connection.
2.3. Bluetooth 5.2 Connection
The mouse can connect to up to three Bluetooth devices (BT1, BT2, BT3).
- Slide the mode switch on the bottom of the mouse to 'BT'.
- Short press the BT switching key (located on the bottom of the mouse, near the mode switch) to cycle between BT1, BT2, and BT3 channels. The indicator light will show a blue light for Bluetooth connection.
- To enter pairing mode, press and hold the BT switching key for 5 seconds. The indicator light will blink rapidly.
- On your computer or device, go to Bluetooth settings and search for new devices. Select "Attack Shark X6" from the list.
- Once paired, the indicator light will become solid blue.
3. Driver Installation
For full customization, including DPI adjustments, macro programming, and polling rates, download and install the official driver software. The driver is compatible with Windows operating systems (XP, Win7, Win8, Win10, Win11).
- Download the X6 Mouse Driver (English) from the official website: http://en.freewolfgaming.com.cn/Download.aspx?ClassID=26&page=1
- Follow the on-screen instructions to complete the installation.
Operating Instructions
1. Mouse Layout and Buttons
- Left Button: Standard left-click function.
- Right Button: Standard right-click function.
- Middle Button/Scroll Wheel: Scroll up/down, middle-click.
- Forward Button: Default for navigating forward in browsers/applications.
- Backward Button: Default for navigating backward in browsers/applications.
- DPI Adjust Button: Cycles through preset DPI levels.
2. DPI Adjustment
The X6 mouse features a PixArt PAW3395 sensor with up to 26000 DPI. You can adjust the DPI sensitivity using the dedicated DPI button on the mouse or through the driver software for 6-level adjustment.
3. Macro Programming
Utilize the X6 Intelligent Drive software to customize macros. This allows you to assign complex sequences of keystrokes and mouse clicks to a single button, enhancing your gaming and productivity.
- Open the X6 Intelligent Drive software.
- Navigate to the macro settings section.
- Create or edit macros and assign them to desired mouse buttons.
- Save your configurations.
4. RGB Lighting Effects
The magnetic charging base features an exclusive RGB light ring. You can switch between multiple light effects by touching the designated area on the base.
5. Ergonomic Design and Grip Styles
The X6 mouse is ergonomically designed for comfort during long periods of use. It supports various grip styles including Plank Grip, Finger Grip, and Grasp.
Maintenance
1. Cleaning
- Use a soft, dry cloth to clean the mouse and charging base.
- Avoid using harsh chemicals or abrasive materials, as these can damage the surface.
- For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying.
2. Battery Care
- To prolong battery life, avoid fully discharging the mouse frequently.
- Charge the mouse when the battery indicator is low.
- Store the mouse in a cool, dry place when not in use for extended periods.
Troubleshooting
1. Mouse Not Responding
- Wired: Ensure the Type-C cable is securely connected to both the mouse and the computer. Try a different USB port.
- 2.4G Wireless: Ensure the 2.4G receiver is securely plugged into a USB port. Check that the mode switch on the mouse is set to '2.4G'. Try re-pairing by unplugging and replugging the receiver, then turning the mouse off and on.
- Bluetooth: Ensure the mouse is in 'BT' mode and paired correctly. Check your device's Bluetooth settings. If already paired, try unpairing and re-pairing the mouse. Ensure the mouse is charged.
2. DPI or Macro Settings Not Working
- Ensure the X6 Intelligent Drive software is installed correctly and running.
- Verify that your custom settings have been saved within the software.
- Restart the software and/or your computer.
3. RGB Lighting Not Functioning
- Ensure the magnetic charging base is powered.
- Try touching the light switching key on the base to cycle through effects.
4. Compatibility with Windows 11
The Attack Shark X6 mouse and its driver software are designed to be compatible with Windows 11, as well as older versions like XP, Win7, Win8, and Win10. If you encounter issues, ensure your Windows 11 system is up to date and try reinstalling the mouse driver.
Specifications
| Feature | Detail |
|---|---|
| Model | X6 |
| Connection Type | Wired / 2.4G Wireless / Bluetooth 5.2 (Tri-Mode) |
| Sensor Model | PixArt PAW3395 |
| DPI | 800-26000 DPI (6-level adjustment) |
| Acceleration | 50 G |
| Movement Speed | 650 IPS |
| Return Rate (Polling Rate) | 125-1000Hz |
| Switch Type | HUANO Pink Spots (80 Million Cycles Life) |
| Number of Buttons | 6 |
| Number of Rollers | 1 |
| Operation Mode | Opto-electronic |
| Power Type | Rechargeable |
| Battery Life | Approx. 65 hours (continuous working) |
| Charging Time | 2-3 hours |
| Dimensions | 118.3 x 62 x 37.3 mm |
| Weight | 55g ± 3g |
| Colors Available | Black, White, Red |
| Supported OS | XP, Win7, Win8, Win10, Win11, Mac, Android, etc. |
| Certification | CE, RoHS |
Note: The above data is for general information. The manufacturer may upgrade the product from time to time, so product parameters may change slightly. Please refer to the actual product for details.
User Tips
- Driver Customization: For optimal performance and personalized settings, always install the official driver software. This allows you to fine-tune DPI, set macros, and adjust polling rates beyond the default settings.
- Multi-Device Connectivity: Take advantage of the tri-mode connection. Use 2.4G wireless for low-latency gaming on your PC, Bluetooth for general use with laptops or tablets, and wired mode for charging or when a stable connection is critical.
- Battery Management: While the mouse offers long battery life, consider placing it on the magnetic charging base when not in active use to ensure it's always ready for your next session.
- Ergonomic Comfort: Experiment with different grip styles (Plank, Finger, Grasp) to find what feels most comfortable for your hand size and usage patterns, especially during extended gaming sessions.
Warranty and Support
For technical support, driver downloads, or any inquiries regarding your Attack Shark X6 mouse, please visit the official website or contact the seller directly. The driver download link is provided in the Setup Guide section of this manual.
Please refer to the product packaging or seller's information for specific warranty terms and conditions.
