Ancel AS100 OBD2 Car Diagnostic Tool User Manual

1. Introduction

The Ancel AS100 is a professional OBD2/EOBD car diagnostic tool designed to help you quickly and efficiently diagnose engine-related issues in your vehicle. This multilingual code reader provides essential diagnostic functions, allowing you to understand and address problems indicated by your vehicle's check engine light.

Key functions include reading and erasing diagnostic trouble codes (DTCs), viewing live data streams, performing I/M readiness tests, and retrieving vehicle information. Its compact design makes it easy to carry and use anywhere.

Ancel AS100 device highlighting its core diagnostic functions.

2. Setup

The Ancel AS100 is designed for simple plug-and-play operation. Follow these steps to set up your device:

1. Locate the OBD2 Port: The OBD2 (On-Board Diagnostics II) port is typically located under the dashboard on the driver's side of your vehicle. Refer to your vehicle's owner's manual if you cannot find it.
2. Connect the Scanner: Plug the AS100's OBD2 connector firmly into your vehicle's OBD2 port.
3. Turn on Ignition: Turn your vehicle's ignition to the 'ON' position (do not start the engine). The scanner will power on automatically.
4. Select Language: If prompted, or if you wish to change the language, navigate to the 'Tool Setup' menu on the device. Select 'Language' and choose your preferred language from the available options (Dutch, English, French, German, Greek, Italian, Polish, Russian, Spanish, Suomi).

Changing the display language on the Ancel AS100.

3. Operating Instructions

The Ancel AS100 offers several diagnostic functions accessible through its menu. Use the navigation buttons (up, down, left, right) and the 'OK' (green checkmark) button to select options, and the 'ESC' (red X) button to go back.

Overview of OBD-II/EOBD Engine Diagnosis functions.

3.1. Reading Codes (DTCs)

This function displays detailed descriptions of Diagnostic Trouble Codes (DTCs) that have triggered the Check Engine Light (MIL).

1. From the main menu, select 'Read Codes'.
2. The scanner will display current, pending, and permanent DTCs.
3. Use the navigation buttons to scroll through the codes and their descriptions.

Direct display of DTC error code and its meaning.

3.2. Erasing Codes & Reset

This function clears Diagnostic Trouble Codes (DTCs) from the vehicle's computer and turns off the Check Engine Light (MIL). It also resets monitors.

1. From the main menu, select 'Erase Codes'.
2. Confirm your choice when prompted.
3. The Check Engine Light should turn off, and DTCs will be cleared.

Clearing codes and turning off the engine warning light.

3.3. Data Stream

View live ECU/PCM data stream, which can be displayed graphically. This includes parameters like volts, RPM, temperature, speed, and system status information.

1. From the main menu, select 'Data Stream'.
2. The device will display various live sensor readings.
3. Use navigation buttons to scroll through different data parameters.

Viewing live data such as Freeze Frame information.

3.4. I/M Readiness Status

This function checks if the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing (emission test).

1. From the main menu, select 'I/M Readiness'.
2. The scanner will display the status of various monitors (e.g., MIL, MIS, FUEL, CCM, CAT, HCAT).
3. A 'green checkmark' indicates good condition, a 'yellow triangle' suggests issues needing fixing, and a 'red X' indicates serious problems.

One-click I/M Readiness for emission testing.

3.5. View Freeze Frame Data

Freeze Frame Data captures a snapshot of the vehicle's operating conditions at the moment an emission-related fault occurs, providing valuable context for diagnosis.

1. From the main menu, select 'Freeze Frame'.
2. The device will display recorded parameters from the time the fault was detected.

3.6. Read Vehicle Information

This function displays important vehicle identification information.

1. From the main menu, select 'Vehicle Information'.
2. The scanner will display information such as VIN (Vehicle Identification Number), CID (Calibration ID), and CVN (Calibration Verification Number).

3.7. Other Functions

• Smoke Emission Check: Helps verify the vehicle's smoke emission status.
• Engine EPC Check: Assists in checking the Electronic Power Control system.

Various function displays on the Ancel AS100.

4. Maintenance

To ensure the longevity and proper functioning of your Ancel AS100 diagnostic tool, follow these maintenance guidelines:

• Storage: Store the device in a clean, dry environment away from extreme temperatures, direct sunlight, and excessive humidity.
• Cleaning: Use a soft, damp cloth to clean the exterior of the device. Do not use abrasive cleaners or solvents.
• Cable Care: Avoid bending or twisting the OBD2 cable excessively. Always grasp the connector when plugging or unplugging to prevent damage to the cable or port.
• Software Updates: The device supports software updates. Check the manufacturer's website periodically for the latest software versions to ensure optimal performance and compatibility with newer vehicles.

5. Troubleshooting

If you encounter issues with your Ancel AS100, refer to the following common problems and solutions:

5.1. Common Car Issues Diagnosed by AS100

The AS100 can help diagnose underlying causes for common vehicle problems such as:

• Car ignition difficulty
• Engine fault light blinking
• Vehicle liquid leakage (if related to engine sensors)
• Exhaust emission exceed
• Loss of power during acceleration
• Large fuel consumption

Common vehicle issues that the AS100 can help diagnose.

5.2. Compatibility Issues

While the AS100 is compatible with most OBD2-compliant vehicles, certain models or regions may have specific limitations:

• Russian Cars: Not compatible with VAZ, UAZ, LADA.
• Trucks: Does not work with trucks.
• Specific Ssangyong Models: Not supported for Ssangyong Actyon (2009-2017), Korando 2.0 TD Diesel (2013-2017), Kyron 2.0 Diesel (2010-2017), Rexton (2011-2017).
• Other Exclusions: Not supported for Opel Corsa C 2004 1.3 CDTI, VW Golf 4 2002.
• Renault Models: Not supported for Renault Clio 2/Megane/Dacia Logan.
• Special Functions: This device only has standard OBD2 functions. It does NOT support special functions like ABS Reset, Airbag Reset, or brake caliper retraction.
• Regional Protocols: Vehicle OBD2 protocol support can vary by region and specific car design, especially for Japanese and Korean brands. If unsure about compatibility, provide your vehicle's make, year, engine size (e.g., 2.0cc), and fuel type (e.g., Diesel) to the seller for verification.

6. Specifications

6.1. Supported Car Brands and Years

Comprehensive list of supported vehicle brands and manufacturing years.

• American (USA) Cars: Compatible with Standard OBD2 Cars from 1996 to present (e.g., Chrysler, Ford, GM, Jeep).
• European Cars: Compatible with Standard OBD2 Cars from 2003 to present (e.g., Alfa Romeo, SAAB, Acura, Opel, Audi, Seat, Bentley, Skoda, Daewoo, Benz, Daihatsu, Land Rover, BMW, Vauxhall, Volvo, VW, Ford, Jaguar).
• French Cars: Compatible after 2006 (e.g., Citroen, Fiat, Renault, Peugeot).
• Japanese Cars: Compatible with Standard OBD2 Cars from 2005 to present (e.g., KIA, Isuzu, Honda, Mitsubishi, Hyundai, Dacia, Lexus, Mazda, Nissan, Subaru, Suzuki, Toyota).
• Chinese Cars: Compatible with Standard OBD2 Cars from 2008 to present (e.g., BYD, Chery, Geely, Great Wall, Karry).

7. User Tips

Based on common user inquiries and experiences, here are some tips for using your Ancel AS100:

• Verify Compatibility: Before purchasing or using, especially for older or less common vehicle models (e.g., Dacia Duster 2011, Renault Scenic 2012, Citroen C3 diesel 2016, Renault Trafic 2020, Citroën Jumper 2007), it's highly recommended to confirm compatibility with the seller by providing your car's make, model, year, engine size, and fuel type.
• Understand Limitations: Remember that the AS100 is a basic OBD2/EOBD scanner. It excels at reading and clearing engine codes and viewing live data but does not perform advanced functions like ABS resets, airbag system diagnostics, or electronic parking brake (EPB) service functions (e.g., retracting brake calipers).
• Engine Off, Ignition On: For most diagnostic procedures, ensure the vehicle's engine is off but the ignition is in the 'ON' position.
• Clear Codes After Repair: After performing any repairs based on the diagnostic codes, use the 'Erase Codes' function to clear the DTCs and turn off the Check Engine Light. Drive the vehicle for a short period to allow monitors to reset.
• Portability: The AS100 is compact and easy to carry, making it convenient for quick checks or on-the-go diagnostics.

The compact size of the Ancel AS100 makes it easy to carry.

8. Warranty and Support

For any questions, technical assistance, or support regarding your Ancel AS100 diagnostic tool, please contact the seller or manufacturer directly. Ensure you have your product model and any relevant purchase information ready when seeking support.

The device supports software updates, which can be obtained from the manufacturer's official channels to ensure you have the latest features and vehicle compatibility.