SUNSHINE SS-918L

Contents

SUNSHINE SS-918L LCD Screen Separator Machine User Manual

Model: SS-918L

1. Introduction

The SUNSHINE SS-918L is an advanced LCD screen separator machine designed for efficient and precise separation of mobile phone touch screens and LCDs. It features strong suction, quick heating capabilities, and a visual temperature control panel, making it an essential tool for professional phone repair technicians.

SUNSHINE SS-918L LCD Screen Separator Machine with included accessories

Figure 1: SUNSHINE SS-918L LCD Screen Separator Machine with included accessories.

2. Key Features

  • Strong Suction: Equipped with a high-quality air pump for effective screen adsorption, ensuring stability during separation.
  • Quick Heating: Rapid and uniform heating of the alumina panel for efficient screen separation.
  • Wide Compatibility: Suitable for separating LCD screens of various mobile phone models.
  • Precise Temperature Control: Digital temperature controller allows adjustment from 50 to 130 °C for different screen types.
  • Low Noise & Vibration: The integrated air pump operates with minimal noise and vibration, enhancing the user experience.
  • Durable Construction: Features an alumina panel and heat-insulating silicone pad for safety and longevity.
Overview of the SS-918L LCD Screen Separator Machine highlighting its use for phone screen separation

Figure 2: Overview of the SS-918L LCD Screen Separator Machine highlighting its use for phone screen separation.

Exploded view showing the Super Suction mechanism

Figure 3: Exploded view showing the Super Suction mechanism, including the high-quality air pump, alumina panel, and heat-insulating silicone pad.

3. Specifications

Attribute Value
Model SS-918L
Work Area Dimensions 190mm (Length) x 110mm (Width)
Work Area Diagonal 215mm (8.5 inches)
Temperature Range 50 to 130 °C
Material Metal (main body), Alumina (heating plate), Silicone (insulation pad)
Type Combination (Separator Machine)
Power Input Options EU220V, US110V
Package Length 31 cm
Package Width 24 cm
Package Height 12 cm
Package Weight 1.6 kg
Diagram illustrating the 8.5-inch work area of the SS-918L with dimensions

Figure 4: Diagram illustrating the 8.5-inch work area of the SS-918L, with dimensions of 190mm length, 110mm width, and a 215mm (8.5 inches) diagonal.

4. Setup Instructions

  1. Unpack: Carefully remove the SS-918L machine and all accessories from the packaging.
  2. Placement: Place the machine on a stable, flat, and heat-resistant surface.
  3. Silicone Pad: Position the thermal insulation silicone pad on the heating plate.
  4. Power Connection: Connect the power cable to the machine and then to a suitable power outlet (EU220V or US110V, depending on your model).
  5. Desktop Fixing (Optional): For enhanced stability, the machine can be fixed to a desktop using the provided brackets and screws. Secure the brackets to the underside of the machine and then to your workbench.
Labeled diagram of the SS-918L machine identifying key components

Figure 5: Labeled diagram of the SS-918L machine, identifying key components such as the Thermal Insulation Silicone Pad, Cutting wire slider, Heating plate, Power Switch, Temperature display, and Set/Up/Down buttons.

5. Operating Instructions

Follow these steps for safe and effective LCD screen separation:

  1. Power On: Flip the main power switch to the 'ON' position. The temperature display will light up.
  2. Set Temperature: Use the 'Temp/温度' and 'Set/设置' buttons, along with the Up and Down arrows, to set the desired temperature between 50 and 130 °C. The machine will begin heating.
  3. Activate Suction: Place the mobile phone screen (with the LCD facing up) onto the silicone pad on the heating plate. Ensure it is centered. Press the suction button (often integrated with the main power switch or a separate button) to activate the vacuum, securing the screen in place.
  4. Screen Separation Process:
    1. Bracket Removal (if applicable): If the phone has a bracket that needs to be removed before screen separation, apply a suitable solvent and carefully remove the bracket using appropriate tools (e.g., pliers, pry tools).
    2. Glass Separation: Once the screen has reached the set temperature, use a cutting wire (e.g., 0.03mm RL-059D) to carefully slide between the glass and the LCD, separating them.
    3. Liquid Crystal Glue Removal: After separating the glass, use a specialized tool to remove any residual liquid crystal glue from the LCD surface.
    4. LCD Cleaning: Gently clean the LCD surface with a soft cloth and appropriate cleaning solution to remove any remaining debris or residue.
  5. Power Off: After use, long-press the power button to turn off the independent heating system, then flip the main power switch to 'OFF'.
Close-up of the Visual Temperature Control Panel

Figure 6: Close-up of the Visual Temperature Control Panel, displaying the digital temperature readout and control buttons for adjusting temperature between 50 and 130 °C.

Video 1: Demonstration of the SUNSHINE SS-918L LCD Screen Separator Machine in operation, including setup and screen separation steps.

6. Maintenance

  • Cleaning: Regularly clean the heating plate and silicone pad with a soft, lint-free cloth after each use to prevent residue buildup. Ensure the machine is cool and unplugged before cleaning.
  • Inspection: Periodically inspect the power cable, heating plate, and control panel for any signs of wear or damage.
  • Storage: Store the machine in a dry, dust-free environment when not in use.
  • Silicone Pad Replacement: Replace the thermal insulation silicone pad if it becomes worn, damaged, or loses its adhesive properties.

7. Troubleshooting

Machine does not power on:
Check if the power cable is securely connected to both the machine and the power outlet. Ensure the power switch is in the 'ON' position. Verify the power outlet is functional.
Heating plate is not heating:
Confirm that the machine is powered on and the temperature is set correctly. If the issue persists, contact customer support.
Suction is weak or not working:
Ensure the silicone pad is clean and free of debris, allowing for a proper seal. Check that the phone screen is placed flat on the pad. Verify that the suction mechanism is activated. If the air pump is making unusual noises or not engaging, contact customer support.
Temperature display is erratic:
This could indicate a sensor issue. Try restarting the machine. If the problem continues, seek professional assistance.

8. User Tips

  • Always wear appropriate safety gear, such as gloves and eye protection, when performing screen separation.
  • Use the lowest effective temperature setting to minimize the risk of damage to the LCD.
  • Ensure the cutting wire is thin and strong enough for the specific screen you are working on to prevent scratching or damaging the LCD.
  • Practice on damaged screens before attempting repairs on valuable devices.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Note: While some product information may be available in other languages (e.g., French), this manual is provided in English. For specific language versions or additional documentation, please inquire with the seller.

© 2023 SUNSHINE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.