1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of the Haier Refrigerator Control Board, model 0061800133A. Please read this manual thoroughly before attempting any installation or repair to ensure proper function and safety.
2. Safety Information
WARNING: Risk of Electric Shock. Disconnect power before servicing.
- Always disconnect the refrigerator from the power supply before installing, removing, or servicing the control board.
- Installation should only be performed by qualified personnel.
- Wear appropriate personal protective equipment (PPE), such as insulated gloves, if necessary.
- Ensure the replacement board is compatible with your specific refrigerator model.
- Do not attempt to modify the control board.
3. Product Overview
3.1 Components
The Haier Refrigerator Control Board 0061800133A is a printed circuit board (PCB) designed to manage the various functions of a Haier refrigerator or freezer. It integrates multiple electronic components responsible for temperature regulation, compressor control, defrost cycles, and user interface communication.

Figure 1: Front view of the Haier Refrigerator Control Board 0061800133A, showing various electronic components, capacitors, inductors, and connectors.

Figure 2: Back view of the Haier Refrigerator Control Board 0061800133A, displaying the green printed circuit board traces and integrated circuits.
3.2 Specifications
| Feature | Detail |
|---|---|
| Item Name | Refrigerator Control Board |
| Brand | Haier |
| Part Number | 0061800133A |
| Type | Refrigerator Parts |
| Quality | New |
| Origin | Mainland China |
| High-concerned chemical | None |
4. Setup and Installation
IMPORTANT: Installation of this control board requires technical expertise. If you are not confident in your ability to perform this installation safely, please consult a qualified appliance technician.
- Verify Compatibility: Before proceeding, ensure that the part number 0061800133A precisely matches the control board required for your specific Haier refrigerator model. Refer to your refrigerator's service manual or contact Haier customer support for confirmation.
- Disconnect Power: Unplug the refrigerator from the wall outlet to completely cut off power. Do not rely solely on turning off the refrigerator's internal power switch.
- Access the Control Board: Locate and carefully remove the access panel(s) that cover the existing control board. This location varies by refrigerator model (commonly found at the back, top, or inside the fresh food compartment).
- Document Connections: Before disconnecting any wires, take clear photographs or make detailed diagrams of all wire connections to the old control board. Pay close attention to the orientation and color coding of each wire.
- Remove Old Board: Carefully disconnect all wires and mounting screws securing the old control board. Handle the board by its edges to avoid touching electronic components.
- Install New Board: Position the new Haier Refrigerator Control Board 0061800133A in the same location as the old one. Secure it with the original mounting screws.
- Reconnect Wires: Using your photographs or diagrams, meticulously reconnect all wires to the new control board. Double-check each connection to ensure it is secure and correctly oriented.
- Replace Access Panel: Once all connections are verified, replace any access panels or covers that were removed.
- Restore Power: Plug the refrigerator back into the wall outlet.
- Test Functionality: Monitor the refrigerator's operation for several hours to ensure all functions (cooling, defrost, lighting, etc.) are working correctly.
If you encounter any issues during installation or after restoring power, refer to the Troubleshooting section or contact support.
5. Operating Instructions
The control board itself does not have direct user-operable controls. Its function is to manage the internal operations of the refrigerator based on user settings and sensor inputs. Once correctly installed, the refrigerator should resume normal operation according to its design specifications and any settings you have configured via the refrigerator's user interface (e.g., temperature settings, ice maker functions).
Refer to your specific Haier refrigerator model's user manual for instructions on how to operate and adjust its settings.
6. Maintenance
The Haier Refrigerator Control Board 0061800133A is a sealed electronic component and does not require routine maintenance. To ensure its longevity and proper function:
- Keep the area around the control board clean and free from dust and debris.
- Ensure proper ventilation for the refrigerator to prevent overheating of internal components, including the control board.
- Avoid exposing the control board to excessive moisture or extreme temperature fluctuations.
CAUTION: Do not attempt to clean the control board with liquids or abrasive materials. If cleaning is necessary, use a dry, soft brush or compressed air while the power is disconnected.
7. Troubleshooting
If your refrigerator is not functioning correctly after installing the new control board, consider the following troubleshooting steps:
- No Power/Refrigerator Not Turning On:
- Check if the refrigerator is properly plugged into a working electrical outlet.
- Verify that the circuit breaker for the refrigerator has not tripped.
- Ensure all wire connections to the control board are secure and correctly seated.
- Incorrect Temperature/Cooling Issues:
- Confirm that the refrigerator's temperature settings are correct.
- Check if the refrigerator doors are sealing properly.
- Inspect the condenser coils for dust buildup and clean if necessary (refer to your refrigerator's manual).
- Ensure the new control board is the correct model for your refrigerator.
- Unusual Noises:
- Verify that the control board is securely mounted and not vibrating against other components.
- Check for any loose wires or components that might be causing noise.
- Error Codes on Display:
- If your refrigerator displays an error code, consult your refrigerator's user manual or Haier's support documentation for the specific meaning of the code and recommended actions.
If the problem persists after performing these checks, it is recommended to contact a qualified service technician. As mentioned in the product description, "Contact us to solve problems together, if the product does not work."
8. User Tips
- Model Verification is Key: Several users inquire about specific model compatibility (e.g., "busco tarjeta HRF2-37"). Always double-check that the part number 0061800133A is the exact replacement for your refrigerator's original control board. Even slight variations can lead to incompatibility.
- Professional Installation Recommended: Due to the sensitive nature of electronic components and the potential for electric shock, professional installation is highly advised if you are not experienced with appliance repair.
- Document Everything: Before disassembling anything, take photos and notes of wire connections. This will be invaluable during reassembly.
9. Warranty and Support
9.1 Warranty Information
This Haier Refrigerator Control Board 0061800133A comes with a 3-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
9.2 Technical Support
For technical assistance, warranty claims, or if you require further guidance on installation or troubleshooting, please contact the seller or a qualified Haier service center. It is recommended to have your refrigerator's model number and the control board's part number (0061800133A) ready when contacting support.
10. Disposal Information
This product contains electronic components and should not be disposed of with general household waste. Please follow local regulations for the proper disposal of electronic waste. Recycling helps conserve natural resources and prevents potential harm to the environment and human health.