1. Introduction
Thank you for purchasing the Bandai Gundam MSE (Mobile Suit Ensemble) Gacha Scale Model. These collectible action figures feature detailed designs of popular Gundam characters, including Gundam Heavyarms Ensemble and Gundam Astray. Each figure is a 'Finished Good' model, meaning it comes pre-painted and largely assembled, with some accessories requiring attachment. This manual provides essential information for safe handling, assembly, display, and care of your new Gundam figure.
2. Safety Information
- Recommended Age: This product is recommended for ages 14 years and older, and 18 years and older. It contains small parts that may pose a choking hazard for younger children.
- Warning: Keep away from fire.
- California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Handle with care to avoid breakage of delicate parts.
3. Product Overview & Components
Each Gundam MSE Gacha figure typically includes the main mobile suit body and various interchangeable accessories such as weapons, shields, and additional armor parts. The specific components vary by model and series.
Figure 1: Overview of various Gundam figures and their interchangeable parts.
Common components may include:
- Main Mobile Suit Figure (e.g., Gundam Heavyarms, Gundam Astray)
- Rifle(s)
- Shield(s)
- Beam Saber(s)
- Optional hands or posing accessories
- Backpack or flight unit attachments
Figure 2: Red and white Gundam Astray figure with its rifle and shield, and separate weapon and backpack components.
4. Setup & Assembly
Your Gundam MSE figure is a 'Finished Good', meaning the main body is pre-assembled. Assembly primarily involves attaching weapons and other accessories.
- Unpack Components: Carefully remove all parts from the packaging. Identify the main figure and all accessories.
- Attach Weapons: Gently insert the rifle(s) and/or beam saber(s) into the designated hand slots or attachment points on the figure. Do not force parts.
- Attach Shields: Connect the shield(s) to the arm or back attachment points as appropriate for the specific model.
- Install Backpack/Flight Units: If included, align and attach any backpack or flight unit accessories to the back of the figure.
- Check Connections: Ensure all attached parts are secure but can still be articulated for posing.
Figure 3: Detailed view of multiple Gundam figures and their various weapon and armor accessories, illustrating assembly.
5. Operating & Display
These figures are designed for display and light posing. Their small scale allows for versatile placement.
- Posing: Gently articulate the joints to achieve desired poses. Avoid excessive force to prevent breakage.
- Display: Place your figure on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity to preserve its condition.
- Interchangeable Parts: Some figures may have interchangeable parts (e.g., different weapons, hands, or armor pieces). Refer to the specific model's packaging or online resources for detailed options.
6. Maintenance
- Cleaning: Use a soft, dry cloth or a soft brush to gently remove dust. For stubborn dirt, lightly dampen a cloth with water (no harsh chemicals) and wipe carefully, then dry immediately.
- Storage: When not on display, store figures in a cool, dry place, preferably in their original packaging or a protective container, to prevent dust accumulation and damage.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause discoloration or degradation of the PVC material.
7. Troubleshooting
- Loose Parts: If a part feels loose, ensure it is fully inserted into its connection point. For persistent looseness, a small amount of clear nail polish or a similar non-permanent adhesive on the joint can temporarily tighten it (apply sparingly and allow to dry completely before re-attaching).
- Difficulty Attaching Accessories: If an accessory is difficult to attach, ensure correct orientation. Do not force it; gently wiggle or apply slight pressure. If the connection point is too tight, carefully widen it slightly with a hobby knife (adult supervision recommended).
- Figure Instability: Ensure the figure is posed with its center of gravity balanced. Adjust leg and foot positions for maximum stability.
8. Specifications
| Brand Name | Bandai |
| Model Number | Gundam GACHA Model |
| ACG Name | Gundam Model |
| ACG Character | Gundam Heavyarms Ensemble Gundam Astray |
| Material | PVC |
| Dimensions | 7cm |
| Scale | 1/12 |
| Completion Degree | Finished Goods |
| Version Type | First Edition |
| Origin | Mainland China |
| Certification | CE |
9. User Tips
- These figures are high-quality, finished goods models, perfect for adding to any collection.
- The Gacha plastic model design and First Edition version type make these figures distinctive collectibles.
- The figures belong to the broader Gundam Model series, offering a wide range of compatible themes for display.
- Consider using a display stand (sold separately) for more dynamic posing and stability.
10. Warranty & Support
For any questions, concerns, or support regarding your Bandai Gundam MSE Gacha Scale Model, please contact the seller or manufacturer directly. Keep your purchase records for reference.
