1. Introduction
The INSKAM HD1080P Industrial Endoscope Camera is a versatile inspection tool designed for detailed visual examination in hard-to-reach areas. Featuring a 4.3-inch IPS screen and an 8mm camera probe (available in single or dual lens configurations), it provides clear 1080P HD images and videos. Its rigid cable and IP67 waterproof rating make it suitable for various industrial and household applications, including automotive, plumbing, and HVAC inspections.
2. Safety Information
⚠️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
3. Package Contents
Please check the package contents upon receipt to ensure all items are present:
- INSKAM HD1080P Endoscope Main Unit
- Camera Probe (1m, 5m, or 10m rigid cable, single or dual lens)
- USB Charging Cable
- Waterproof Set
- Magnet Attachment
- Hook Attachment
- User Manual (this document)
4. Product Overview
The endoscope consists of a main display unit and a flexible camera probe. Familiarize yourself with the components and controls:
- 4.3-inch IPS Screen: High-definition display for clear viewing.
- Power Button: Turns the device on/off.
- LED Light Adjustment Button: Controls the brightness of the camera's LED lights.
- Capture Button: Takes photos or starts/stops video recording.
- UP/Down Buttons: Navigate menus, enlarge images, or rotate the image 180 degrees.
- OK Button: Confirms selections, acts as a still screen button, and switches between front/side lenses (for dual lens models).
- Mode Switch Button (M): Switches between photo, video, and playback modes.
- TF Card Slot: For inserting a MicroSD card to store media.
- USB Port: For charging and data transfer.
- Reset Button: Resets the device (requires a pin).
- Indicator Light: Shows charging status or operation.
- Camera Probe: Features an 8mm diameter lens (single or dual) with adjustable LED lights and IP67 waterproofing.
5. Setup
- Charge the Device: Connect the endoscope to a 5V/1A USB power source using the provided USB cable. The indicator light will show charging status. A full charge takes approximately 2.5 hours.
- Insert TF Card: Open the rubber cover on the side of the main unit. Carefully insert a MicroSD (TF) card into the designated slot until it clicks into place. Ensure the card is correctly oriented. (TF card not included).
- Connect Camera Probe: Align the connector of the camera probe with the port on the top of the main unit. Screw it in securely until it is finger-tight.
- Power On: Press and hold the Power button for a few seconds until the screen turns on and displays the INSKAM logo.
6. Operating Instructions
- Power On/Off: Press and hold the Power button to turn the device on or off.
- Adjust LED Lights: Press the LED light adjustment button (💡 icon) to cycle through brightness levels or turn the lights off.
- Switching Lenses (Dual Lens Model Only): If you have a dual-lens model, press the 'OK' button to switch between the front camera view and the side camera view.
- Taking Photos: In photo mode, press the Capture button (📷 icon) once to take a picture. The image will be saved to the TF card.
- Recording Video: In video mode, press the Capture button (📷 icon) once to start recording. Press it again to stop recording. The video will be saved to the TF card.
- Switching Modes: Press the 'M' (Mode) button to switch between photo mode, video recording mode, and playback mode.
- Image Rotation: While viewing live feed or playback, use the UP (▲) or DOWN (▼) buttons to rotate the image 180 degrees.
- Using Attachments: The magnet and hook attachments can be screwed onto the camera probe for retrieving small metallic objects or navigating obstacles. The waterproof set can be used to enhance water resistance for the camera head.
7. Maintenance
- Cleaning: Wipe the main unit with a soft, dry cloth. For the camera lens, use a lens cleaning cloth. Do not use abrasive cleaners or solvents.
- Water Resistance: The camera probe is IP67 waterproof (lens/bulb only). Avoid submerging the main unit in water. Ensure the rubber cover for the TF card and USB port is securely closed when operating in damp environments.
- Battery Care: Recharge the battery when the power is low. Avoid fully discharging the battery frequently to prolong its lifespan. Store the device in a cool, dry place when not in use for extended periods.
- Storage: Store the endoscope and its accessories in a protective case to prevent damage.
8. Troubleshooting
- Device won't turn on: Ensure the battery is charged. If not, connect it to a charger. If the issue persists, try pressing the Reset button with a thin pin.
- No image on screen: Check if the camera probe is securely connected to the main unit. Ensure the device is powered on.
- Image is blurry: Adjust the focal length by moving the camera closer or further from the object. The optimal focal length is 5-10cm for the front camera and 2-6cm for the side camera. Clean the camera lens if necessary.
- Cannot take photos/record video: Ensure a TF card is inserted and has sufficient free space. Check if the device is in the correct mode (photo or video).
- LED lights not working: Press the LED light adjustment button to ensure they are turned on and at the desired brightness level.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | 113-B |
| Screen Type | 4.3 inch IPS Color LCD |
| Resolution | 1920*1080 (1080P HD) |
| Camera Type | Single Lens / Dual Lens (Optional) |
| Lens Diameter | 8mm |
| Wire Type | Hard Wire (Rigid Cable) |
| Cable Length | 1m, 5m, 10m (Optional) |
| Focal Length (Front Camera) | 5CM-10CM |
| Focal Length (Side Camera) | 2CM-6CM |
| Waterproof Level | IP67 (for lens/bulb only) |
| Battery Capacity | 2000mAh |
| Working Time | 3-5 hours |
| Power Input | DC 5V 500mA/1A |
| LED Lights | Adjustable (6 LEDs) |
| Image Format | JPG |
| Video Format | MP4 |
10. User Tips
- Optimal Viewing: For the clearest image, position the camera within its specified focal length range (5-10cm for front, 2-6cm for side).
- Lighting: Utilize the adjustable LED lights to illuminate dark inspection areas effectively. Adjust brightness as needed for optimal visibility.
- Cable Management: The rigid cable can be shaped to navigate around obstacles. Take advantage of this feature for precise positioning.
- Accessory Use: The magnet and hook attachments are invaluable for retrieving dropped items in tight spaces. Practice attaching and detaching them before critical use.
- Battery Life: For longer inspection tasks, ensure the device is fully charged. Consider carrying a portable power bank for extended use.
11. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
