GEYA GYHO8 MTS

Contents

GEYA GYHO8 Manual Transfer Isolating Switch Instruction Manual

Model: GYHO8 MTS | Brand: GEYA

1. Introduction

The GEYA GYHO8 dual power manual isolation switch is designed for reliable on-off, conversion, and isolation functions. It allows for seamless switching between two loads or two power sources, making it ideal for industrial equipment and circuits requiring dual power management. This switch is built for convenience and safety, featuring DIN standard rail installation and a high flame-retardant PA66 injection molded shell.

GEYA GYHO8 Manual Transfer Isolating Switch
GEYA GYHO8 Manual Transfer Isolating Switch (Example 2P 40A model)

2. Safety Information

WARNING: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel.

  • Always disconnect all power sources before installing, servicing, or removing the switch.
  • Ensure proper grounding of the electrical system.
  • Do not operate the switch with wet hands or in damp conditions.
  • Verify that the rated voltage and current of the switch match your application's requirements.
  • Protect the incoming changeover switch with an appropriate Miniature Circuit Breaker (MCB) to guard against short circuits and disconnections.
  • Adhere to all local and national electrical codes and regulations.

3. Product Overview

The GEYA GYHO8 series offers manual transfer isolating switches in various pole configurations and current ratings to suit diverse electrical systems. These switches are designed for reliable performance and ease of installation on standard DIN rails.

Key Features:

  • Functions: On, Off, Conversion, Isolation.
  • Operation: Front operation with three stable positions (I-0-II).
  • Mounting: DIN Rail (35x7.5) facility.
  • Material: PA66 injection molded shell for high flame retardancy.
  • Pole Options: Available in 1P, 2P, 3P, and 4P configurations.
  • Current Ratings: Available in 16A, 25A, 32A, 40A, 63A, 80A, 100A, 125A.
GEYA GYHO8 Manual Transfer Isolating Switch in various pole configurations
GEYA GYHO8 switches in 1P, 2P, 3P, and 4P configurations

About GEYA Electric

Zhejiang GEYA Electric Co., Ltd. was founded in February 2007 in Wenzhou, China. It is a technology-based private enterprise integrating research and development, production, sales, and service, focusing on low-voltage electrical appliances and automation control products. GEYA Electric adheres to a concept of quality first and continuous innovation, maintaining high standards and producing high-quality products. The company has obtained multiple national patents and established the GEYA brand globally, with certifications including CCC, CE, SAA, SEMKO, TUV, EN, etc.

Video: GEYA Company Introduction and Manufacturing Process

4. Specifications

Technical Data

AttributeValue
Rated Voltage240/415V~ (AC400V Ue)
Rated Current16A, 25A, 32A, 40A, 63A, 80A (also 100A, 125A options)
Rated Frequency50/60Hz
Number of Poles1P, 2P, 3P, 4P
Contact formI-0-II
Electrical Life1500 Cycles
Mechanical Life10000 Cycles
Protection degreeIP20
Ambient Temperature-5°C to 40°C
Terminal/Cable size25mm²
InstallationMounting on 35mm DIN rail
StandardIEC/EN60947-3
CertificationCE
EU LVD VoltageBelow 50Vac or 75Vdc
Is Smart DeviceNo
Wireless FunctionalityNo
Includes BatteryNo

Overall Dimensions

Pole ConfigurationWidth (mm)Height (mm)Depth (mm)
1P188074
2P368074
3P548074
4P728074

5. Installation

The GEYA GYHO8 switch is designed for mounting on a 35mm DIN rail. Ensure the installation environment is clean, dry, and within the specified ambient temperature range (-5°C to 40°C).

Wiring Diagrams for Stand-by Generators (1-0-II)

These diagrams illustrate typical connections for manual changeover devices with a center 'OFF' position in the main switchboard, especially when integrating with a stand-by generator or alternative supply. Always ensure the incoming changeover is protected by an appropriate MCB.

Single Phase Connection:

  • Main Neutral Link: Connects the neutral lines.
  • Incoming (Main Supply): Connects to terminals 1 and 3 (for 1P).
  • Outgoing (Load): Connects to terminals 2 and 4 (for 1P).
  • Incoming (Standby Supply): Connects to terminals 5 and 7 (for 1P).
  • Protection: Ensure a circuit breaker is installed for both main and generator supplies.
  • Check Power Protection: Verify that appropriate protection is in place for both sources.

Three Phase Connection:

  • Main Neutral Link: Connects the neutral lines.
  • Incoming (Main Supply): Connects to terminals 1, 3, 5, 7 (for 4P).
  • Outgoing (Load): Connects to terminals 2, 4, 6, 8 (for 4P).
  • Incoming (Standby Supply): Connects to terminals 9, 11, 13, 15 (for 4P).
  • Protection: Ensure circuit breakers are installed for both main and generator supplies.
  • Check Power Protection: Verify that appropriate protection is in place for both sources.

General Wiring Steps:

  1. Bottom Wiring: Connect the wires to the bottom terminals as per the diagram.
  2. Tighten the Screws: Securely tighten all terminal screws to ensure good electrical contact.
  3. Paste Insulating Sheet: Apply any provided insulating sheets to prevent accidental contact.
  4. Top Wiring and Tightening: Connect the wires to the top terminals and tighten the screws.

Note: The position of incoming and outgoing wires can be adjusted according to actual needs. For dual power switching, the lower-in and upper-out configuration is typically used.

6. Operation

The GEYA GYHO8 manual transfer switch features a front-operated handle with three stable positions: I, 0, and II. These positions control the connection to the main supply, standby supply, or complete disconnection.

  • Position I: When the handle is in the 'I' position, the main supply is connected to the load. For a 3P switch, terminals 1-2, 5-6, and 9-10 are connected.
  • Position II: When the handle is in the 'II' position, the standby (generator) supply is connected to the load. For a 3P switch, terminals 1-4, 5-8, and 9-12 are connected.
  • Position 0 (Middle): When the handle is in the middle '0' position, both the main and standby supplies are disconnected from the load, ensuring complete isolation.

Always ensure the switch is operated smoothly and deliberately to engage fully in the desired position.

7. Maintenance

Regular maintenance helps ensure the longevity and safe operation of your GEYA GYHO8 switch.

  • Visual Inspection: Periodically inspect the switch for any signs of physical damage, discoloration, or overheating.
  • Terminal Tightness: Check all terminal connections for tightness. Loose connections can lead to overheating and potential hazards.
  • Cleaning: Keep the switch free from dust, dirt, and moisture. Use a dry, non-abrasive cloth for cleaning. Do not use solvents or harsh chemicals.
  • Operational Check: Occasionally operate the switch through its I-0-II positions to ensure smooth mechanical action. Perform this check without load if possible.
  • Professional Inspection: For any suspected internal issues or after a fault condition, have the switch inspected by a qualified electrician.

8. Troubleshooting

If you encounter issues with your GEYA GYHO8 switch, consider the following common troubleshooting steps:

  • No Power to Load:
    • Check if the switch handle is fully engaged in either position 'I' or 'II'.
    • Verify that the main or standby power source is active.
    • Inspect upstream circuit breakers (MCBs) for trips.
    • Check all wiring connections for tightness and proper installation.
  • Switch Overheating:
    • Ensure the connected load does not exceed the switch's rated current.
    • Check for loose terminal connections, which can cause resistance and heat.
    • Verify proper ventilation around the switch.
  • Difficulty Operating Handle:
    • Ensure no foreign objects are obstructing the handle's movement.
    • Do not force the handle. If it's stiff, inspect for mechanical damage or internal issues.

If the problem persists after basic troubleshooting, consult a qualified electrician.

9. User Tips

  • This switch is highly recommended for off-grid energy systems and connecting inverters or generators where an Automatic Transfer Switch (ATS) is not present.
  • It can be a useful component for creating bypasses around faulty protective devices.
  • To maximize the mechanical life of the switch, always try to switch between positions without an active load.
  • Users have noted the product's good quality and standard workmanship, comparable to other market offerings.

10. Frequently Asked Questions (FAQ)

Q: What are the dimensions of the 100A triple pole model?
A: For a 3P (triple pole) model, the width is 54mm, height is 80mm, and depth is 74mm. Please refer to the 'Overall Dimensions' table in the Specifications section for details on other pole configurations.
Q: Does this switch include wireless functionality or a battery?
A: No, the GEYA GYHO8 Manual Transfer Isolating Switch does not include wireless functionality or a battery.
Q: Is this a smart device?
A: No, this is not a smart device. It is a manual transfer switch.

11. Warranty and Support

GEYA Electric is committed to providing high-quality products. For specific warranty information, technical support, or service inquiries, please contact your local distributor or the GEYA Official Store. Ensure you have your product model number (GYHO8 MTS) and purchase details available when seeking support.

© 2023 GEYA Electric. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.