GEYA GYHO8 MTS

Contents

GEYA GYHO8 Manual Transfer Switch Instruction Manual

Model: GYHO8 MTS Series

1. Introduction and Overview

The GEYA GYHO8 dual power manual isolation switch is designed for reliable on-off, conversion, and isolation functions in electrical circuits. It allows for seamless switching between two loads carried by a group of lines or between two power sources. This device is ideal for industrial equipment and circuits requiring manual power transfer.

Key features include:

  • Four functions: On, Off, Conversion, and Isolation.
  • DIN standard rail (35×7.5) installation for easy mounting.
  • High flame retardant PA66 injection molded shell for enhanced safety.
  • Available in rated currents of 40A, 63A, 100A, and 125A.
GEYA GYHO8 Manual Transfer Switch 3P and 4P models
Figure 1: GEYA GYHO8 Manual Transfer Switch (3P and 4P models)

2. Specifications

AttributeValue
Brand NameGEYA
Model NumberGYHO8 MTS
Product NameManual Transfer Isolating Switch
TypeMini Circuit breaker
Poles3P, 4P
Rated Current63A, 125A
Rated Voltage220/380V, AC400V
Rated Frequency50/60Hz
StandardIEC/EN60947-3
MountingDin Rail
CertificationCE
Is Smart DeviceNo
Package Dimensions (L x W x H)12 cm x 8 cm x 5 cm
Package Weight0.65 kg

3. Safety Information

Always prioritize safety when working with electrical components. Improper installation or use can lead to serious injury or damage. Please observe the following safety guidelines:

  • Professional Installation: Installation should only be performed by a qualified electrician or trained personnel in accordance with local electrical codes and regulations.
  • Power Disconnection: Ensure all power sources are completely disconnected and locked out before attempting any installation, wiring, or maintenance.
  • Proper Wiring: Use appropriate wire gauges and ensure all connections are secure and tightened to prevent overheating or arcing.
  • Environmental Conditions: Do not install the switch in environments exceeding its specified operating temperature or humidity ranges.
  • Inspection: Regularly inspect the switch for any signs of damage, wear, or loose connections.

4. Installation and Setup

The GYHO8 Manual Transfer Switch is designed for DIN rail mounting (35×7.5mm). Follow these steps for installation:

  1. Mounting: Securely attach the switch to a standard 35mm DIN rail within an appropriate electrical enclosure.
  2. Wiring: Connect the normal power source, backup power source, and load to the designated terminals. Refer to the wiring diagrams below for correct connections. The position of incoming and outgoing wires can be adjusted based on actual needs. However, for dual power switching, it is recommended to use lower input and upper output connections.
  3. Terminal Connections: Ensure all wire connections are firm and properly insulated.

Wiring Diagrams

Wiring diagram for 3P and 4P Manual Transfer Switches
Figure 2: General Wiring Diagram for 3P and 4P Switches
Detailed 3P Wiring Diagram
Figure 3: Detailed 3P Wiring Diagram (Normal Power, Backup Power, Load)
Detailed 4P Wiring Diagram
Figure 4: Detailed 4P Wiring Diagram (Normal Power, Backup Power, Load)

5. Operating Instructions

The GYHO8 Manual Transfer Switch features a handle with three positions: I, II, and a middle (OFF) position.

5.1. 3P Manual Transfer Switch (MTS)

  • Handle on 'I' position:
    Terminals 1 and 2 are connected.
    Terminals 5 and 6 are connected.
    Terminals 9 and 10 are connected.
  • Handle on 'II' position:
    Terminals 1 and 4 are connected.
    Terminals 5 and 8 are connected.
    Terminals 9 and 12 are connected.
  • Handle in middle (OFF) position: Both groups of connections are disconnected.

5.2. 4P Manual Transfer Switch (MTS)

  • Handle on 'I' position:
    Terminals 1 and 2 are connected.
    Terminals 5 and 6 are connected.
    Terminals 9 and 10 are connected.
    Terminals 13 and 14 are connected.
  • Handle on 'II' position:
    Terminals 1 and 4 are connected.
    Terminals 5 and 8 are connected.
    Terminals 9 and 12 are connected.
    Terminals 13 and 16 are connected.
  • Handle in middle (OFF) position: Both groups of connections are disconnected.
Front view of 3P and 4P switches with terminal numbers
Figure 5: Terminal Layout for 3P (63A) and 4P (125A) Switches

6. Maintenance

To ensure the longevity and safe operation of your GEYA GYHO8 Manual Transfer Switch, regular maintenance is recommended:

  • Visual Inspection: Periodically inspect the switch for any physical damage, discoloration, or signs of overheating.
  • Terminal Tightness: Check all terminal connections to ensure they remain tight. Loose connections can cause resistance and heat buildup.
  • Cleaning: Keep the switch free from dust, dirt, and moisture. Use a dry, non-abrasive cloth for cleaning. Do not use liquid cleaners.
  • Operation Check: Occasionally operate the switch handle through its positions (I, OFF, II) to ensure smooth mechanical action.

Always disconnect power before performing any maintenance.

7. Troubleshooting

If you encounter issues with your GYHO8 Manual Transfer Switch, consider the following troubleshooting steps:

  • No Power to Load:
    - Verify that both normal and backup power sources are active.
    - Check the switch handle position; ensure it is fully engaged in either 'I' or 'II'.
    - Inspect all wiring connections for looseness or damage.
  • Switch Handle Stiff or Stuck:
    - Ensure no foreign objects are obstructing the handle's movement.
    - Do not force the handle; if it remains stiff, contact a qualified electrician for inspection.
  • Overheating:
    - Check if the rated current of the switch matches the load requirements. Overloading can cause overheating.
    - Ensure all terminal connections are tight.

For persistent problems, consult a qualified electrician.

8. User Tips

Here are some general tips for using your manual transfer switch effectively:

  • Planned Transfers: For critical applications, plan your power transfers during off-peak hours or when the load can tolerate a brief interruption.
  • Regular Testing: Periodically test the transfer function by switching between power sources to ensure the system is operating correctly.
  • Labeling: Clearly label your normal and backup power sources and the loads they supply for quick identification during operation or maintenance.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact GEYA Official Store directly. Ensure you have your product model number (GYHO8 MTS) and any relevant purchase details available when contacting support.

© 2024 GEYA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.