Introduction
Thank you for choosing the Hyper Tough 50W LED 5000 Lumen Rechargeable Free Standing Light. This versatile and durable work light is designed to provide powerful illumination for a variety of tasks, from workshop projects to outdoor activities. Its robust construction, flexible positioning options, and integrated power bank functionality make it an essential tool for any environment. Please read this manual carefully before use to ensure safe and optimal performance.
Product Features
- Powerful COB LED with 5000 lumens brightness (50W equivalent)
- Frosted lens for diffused, glare-reduced light
- High/Low operating modes
- Integrated 180-degree swivel and foldable handle for versatile positioning and portability
- Equipped with magnets on the back for hands-free attachment to metal surfaces
- Rechargeable Lithium Ion battery
- Functions as a high-capacity charger power bank via USB port
- Durable metal construction with reinforced corners
- 1-meter impact resistant design
Setup
1. Initial Charging
Before first use, fully charge the work light. Connect the included 5.9-foot (70-inch) USB charging cord to the light's charging port and a compatible USB power adapter (not included). The charging indicator lights will show the battery status. Ensure the light is fully charged for optimal performance and battery longevity.
2. Positioning the Work Light
The Hyper Tough work light offers multiple positioning options:
- Free Standing: Use the integrated foldable handle as a stand. Adjust the handle to achieve the desired angle for illumination. The handle swivels 180 degrees for maximum flexibility.
- Magnetic Mounting: The back of the light is equipped with magnets, allowing it to securely attach to most metal surfaces for hands-free operation.
- Handheld: The foldable handle also serves as a comfortable grip for portable, handheld use.

Figure 1: 180-degree swivel handle for flexible light direction.

Figure 2: Handheld use of the work light.
Operating Instructions
1. Turning On/Off and Mode Selection
Locate the High/Low button on the work light. Press the button once to turn the light on in High mode. Press it again to switch to Low mode. Press a third time to turn the light off.
2. Power Bank Function
The Hyper Tough work light can also serve as a power bank to charge your mobile devices. Connect your device's USB charging cable to the USB output port on the work light. The light will automatically begin charging your device. This feature is useful for emergencies or when power outlets are unavailable.

Figure 3: Work light functioning as a power bank.
Maintenance
1. Cleaning
To clean the work light, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. Ensure the light is turned off and unplugged before cleaning.
2. Battery Care
To prolong the life of the Lithium Ion battery:
- Avoid completely draining the battery before recharging.
- Store the light in a cool, dry place when not in use.
- If storing for extended periods, charge the battery to approximately 50% every 3-6 months.
Troubleshooting
Light Not Turning On
- Check if the battery is charged. Connect the light to a power source using the USB charging cord.
- Ensure the power button is pressed firmly.
Device Not Charging via Power Bank
- Verify that the work light has sufficient battery charge.
- Ensure the USB cable is properly connected to both the work light and your device.
- Try a different USB cable or device to rule out cable or device issues.
Specifications
| Feature | Specification |
|---|---|
| Light Output | 5000 Lumens |
| Power Rating | 50W |
| Light Source | COB LED |
| Lens Type | Frosted |
| Operating Modes | High / Low |
| Battery Type | Rechargeable Lithium Ion |
| Charging Cable | 5.9-foot (70-inch) USB cord |
| Handle Swivel | 180 degrees |
| Mount Type | Free Standing, Handheld, Magnetic |
| Impact Resistance | 1-meter |
| Assembled Product Dimensions (L x W x H) | 12.60 x 2.76 x 7.87 Inches |
| Features | Impact Resistant, Integrated Handle, Magnetic, Magnetic Base |

Figure 4: Product dimensions.

Figure 5: Various usage scenarios for the work light.
User Tips
Maximize your experience with the Hyper Tough work light using these practical tips:
- Utilize the Magnetic Base: For hands-free lighting, attach the work light to any ferrous metal surface, such as car hoods, toolboxes, or metal shelving.
- Adjust for Optimal Angle: The 180-degree swivel handle allows you to precisely direct the light beam. Experiment with different angles to eliminate shadows and illuminate your workspace effectively.
- Emergency Power: Keep the light charged, even when not primarily used for illumination, so it's ready to serve as a power bank for your phone or other USB devices during power outages or remote work.
- Conserve Battery: Use the Low mode when maximum brightness isn't necessary to extend battery life and runtime.
- Frosted Lens Benefit: The frosted lens diffuses the bright LED light, reducing harsh glare and making it more comfortable for extended use in close quarters.
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.