1. Introduction
This manual provides essential information for the safe and effective use, installation, and maintenance of your Baofeng BL-10 Li-ion battery. Please read this manual thoroughly before using the battery to ensure optimal performance and safety.
2. Safety Information and Warnings
Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the battery or radio.
- Do not disassemble: Attempting to disassemble the battery can lead to internal damage, short circuits, and potential hazards.
- Do not dispose of in fire: Lithium-ion batteries can explode or ignite when exposed to high temperatures.
- Do not change or charge battery in hazardous locations: Ensure charging is done in a safe, well-ventilated area away from flammable materials.
- Do not short-circuit the terminals: Avoid contact between the battery terminals and metal objects to prevent short circuits, which can cause heat, fire, or explosion.
- Use specified charger: Always use a charger specifically designed for this battery model. Using an incompatible charger may damage the battery and pose a fire risk.
- Recycle the replaced battery pack: Dispose of old batteries responsibly according to local regulations.

3. Product Overview
The Baofeng BL-10 is a high-capacity Li-ion battery designed to power compatible Baofeng walkie talkies, such as the A58S and BF UVF10 models. It provides reliable and long-lasting power for extended communication needs.

4. Specifications
| Feature | Specification |
|---|---|
| Model Number | BL-10 |
| Battery Type | LI-ON |
| Battery Capacity | 2800mAh / 20.72Wh |
| Battery Voltage | 7.4V |
| Output Power (Radio) | 3W-5W |
| Waterproof / Water-Resistant | No |
| Battery Included | Yes (This product is the battery itself) |
| Material | Plastic |
| Weight | Approximately 85g per piece |
| Origin | Mainland China |
5. Compatibility
The Baofeng BL-10 battery is designed for use with the following radio models:
- Baofeng A58S Walkie Talkie
- Baofeng BF UVF10 Walkie Talkie
Compatible Battery Part Number: BL-8 (Note: While the battery model is BL-10, it may be compatible with devices specifying BL-8. Always verify compatibility with your specific radio model before purchase and use.)

6. Setup and Installation
6.1 Initial Charging
Your new battery is not fully charged upon delivery. For optimal performance and battery longevity, it is recommended to fully charge the battery before its first use. Refer to your radio's manual for specific charging instructions and use only the designated charger.
6.2 Battery Installation
- Ensure your walkie talkie is powered off.
- Locate the battery compartment on the back of your radio.
- Align the battery with the compartment, ensuring the contacts on the battery match the terminals in the radio.
- Slide the battery into place until it clicks securely. If there is a battery latch, ensure it is engaged.
- To remove, disengage the latch (if present) and slide the battery out.

7. Operating Guidelines
Once installed and charged, the battery powers your walkie talkie. Refer to your specific radio's user manual for detailed operating instructions, including power on/off, channel selection, and transmission procedures.
- Power Management: To maximize battery life, consider using lower power transmission settings when possible.
- Temperature: Operate the radio and battery within recommended temperature ranges to prevent damage and ensure stable performance.
8. Maintenance and Care
8.1 Charging Practices
- Always use the original or a certified compatible charger.
- Avoid overcharging the battery by disconnecting it once fully charged.
- Do not charge the battery in extreme temperatures (too hot or too cold).
8.2 Storage
- If storing the battery for an extended period, charge it to approximately 50% capacity.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid storing the battery fully charged or completely depleted for long durations.
8.3 Cleaning
Wipe the battery and its contacts with a clean, dry cloth. Do not use harsh chemicals or abrasive cleaners.
9. Troubleshooting
- Battery not charging:
- Ensure the charger is properly connected and functioning.
- Check battery contacts for dirt or damage.
- Verify the battery is correctly seated in the charger.
- Short battery life:
- Ensure the battery is fully charged before use.
- Reduce transmit power if possible.
- Consider the age of the battery; Li-ion batteries degrade over time.
- Battery swelling:
- If the battery appears swollen, discontinue use immediately. Swelling indicates a potential internal fault and fire hazard. Replace the battery.

10. User Tips
- Verify Compatibility: Before purchasing or using, always double-check that the battery model (BL-10) and compatible part numbers (e.g., BL-8) are suitable for your specific radio model (e.g., Baofeng A58S, BF UVF10).
- Monitor Battery Condition: Regularly inspect your battery for any signs of physical damage, such as cracks, leaks, or swelling. A swollen battery is a safety risk and should be replaced immediately.
- Initial Charge: Remember that new batteries are not fully charged. Always perform a full charge cycle before the first use to condition the battery and ensure maximum capacity.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.