1. Important Safeguards
Thank you for your trust and purchase. Please read this user manual before use and keep it for future reference.
- Please check whether all parts of the product are in good condition before use. If there is any problem like power cord damage, do not use the product, and contact after-sale service or a professional for replacement.
- Keep the product away from children. Whisk and froth accessories are small; store them in a safe place to avoid loss or accidental ingestion.
- Unplug the product after use, when replacing accessories, or cleaning.
- When cleaning, do not immerse any part of the frother, base, or plug in water or other liquids to prevent electric shock or short circuit. It cannot be washed in a dishwasher.
- Do not use this product near heat sources.
- Refer to the capacity instructions in this manual. The liquid volume cannot exceed the capacity scale, otherwise it will overflow.
- Use the product on a flat and dry surface. Suitable for home use only. Not recommended for commercial or industrial use.
- Do not operate the frother outdoors.
- The user is responsible for their own safety. Individuals with physical, perceptual, or mental disabilities, or lack of professional knowledge, including children, should not operate this frother unless supervised or trained.
- Do not touch the metal part or the spinning whisk when the frother is working.
- Close the lid tightly and do not touch it when using, to avoid scalding from overflow due to malfunction.
- This frother can only work with the power base provided.
This product cannot be disposed of as general household waste and must be sent to a collection point where electrical and electronic equipment are recycled.
2. Product Specifications
| Attribute | Value |
|---|---|
| Rated Voltage/Frequency | (US) 110-130V, 50/60HZ; (EU) 220-240V, 50/60HZ |
| Rated Power | 400W |
| Min/Max Capacity for Frothing | 100mL (min) / 160mL (max) |
| Max Capacity for Heating | 350mL |
| Working Modes | 4 Modes |
| Rotation Rate (RPM) | 6500 |
| Certification | CE |
Product Dimensions
Dimensions of the milk frother: 19.5cm height, 10.9cm width.
3. Product Structure and Components
Exploded view of the milk frother components.
- Transparency Lid
- Frost/Whisk Accessories
- Anti-sticking Liner
- Handle
- Shell
- Control Panel & Button
- Power Base
Control Panel & Indicators
Control panel with function indicators and power/mode button.
- Indicator for Hot Frothing
- Indicator for Heating Milk
- Indicator for Cold Frothing
- Indicator for Heating Chocolate Milk
- Switch & Mode Button
Capacity Markings
Internal capacity markings for heating and frothing.
- Max Capacity for Heating (350mL)
- Max Capacity for Frothing (160mL)
- Min Capacity for Frothing (100mL)
4. Setup
Before First Use
- Carefully read the user manual and check that all accessories are complete.
- Take out the frother and connect it to the power supply to check for normal operation.
- Before the first use, clean the inner wall, lid, and accessories of the frother to remove any dust or residues from production. Refer to the 'Maintenance' section for detailed cleaning instructions.
Voltage Selection
Ensure you select the correct plug type and voltage for your country (EU plug is 220V, US plug is 110V).
5. Operating Instructions
General Operation
- Pour milk into the frother, ensuring it does not exceed the maximum fill line for your desired function (160mL for frothing, 350mL for heating).
- Connect the power base to the power supply and place the frother onto the power base. You should hear a beep, and the 4 indicators will briefly light up, indicating standby mode.
- In standby mode, select your desired function by pressing the 'Switch & Mode Button'. The four modes (from left to right on the control panel) are: Thick warm foam, Heat milk, Cold foam, Light warm foam.
- The indicator for the selected mode will flash 3 times, then remain lit, while other indicators turn off. The frother will begin operation.
- Working times are approximate and based on room-temperature milk. The frother automatically adjusts based on milk volume and initial temperature. Lower initial milk temperature or larger volumes may result in longer processing times.
- To cancel an operation, press the 'Switch & Mode Button' again. The indicator will turn off, and the frother will stop working and return to standby.
Function Overview
| Function | Max Capacity | Time | Temperature |
|---|---|---|---|
| Thick warm foam | 160mL | 80-120s | 65±5°C |
| Heating Milk | 350mL | 120-160s | 65±5°C |
| Cold Frothing | 160mL | 65-85s | Ambient |
| Light warm foam | 160mL | 80-120s | 70±5°C |
Visual Demonstration
Video demonstrating the frother's operation, including whisk insertion, milk addition, hot frothing, cold frothing, heating milk, and cleaning steps.
6. Maintenance
Cleaning Instructions
Before cleaning, disconnect the power supply, separate the frother body from the power base, and remove the lid. Do not soak the frother body and the power base in water, and do not wash in a dishwasher.
Rinsing the frother interior.
- Liner: Moisten a soft towel in cold or warm water with a proper amount of detergent. Clean the anti-sticking liner and dry it with a dry towel.
- Lid: Remove the lid, rinse it with clean water, and dry.
- Shell: Wipe the shell surface with a wet towel and air dry.
- Froth/Whisk Accessory: Remove them from the frother, rinse with clean water. Store in a safe place after cleaning and drying.
Whisk and cleaning brush.
7. Troubleshooting
| Problem | Cause | Solution |
|---|---|---|
| Not Working | Incorrect voltage | Connect with the correct voltage as required. |
| Power plug not connected correctly/not powered on | Check the power plug and power supply. | |
| Power base not properly placed/in bad contact | Remove the frother and place it on the base again properly. | |
| Overheating/Dry Burning | Interior temperature too high (dry burning protection) | Pour cold water into the frother to cool it down. |
| Continuous use without cooling down | Wait for it to cool down or replace the milk before use. | |
| No Response after Power On | Dirt on power base/wet power port on frother bottom causing bad contact | Clean dirt/ensure power port on frother bottom is dry. |
| Overflow | Volume of milk frothing exceeds max capacity of 160mL | Use the frother with milk volume within the scale. |
| Volume of milk heating exceeds max capacity of 350mL | Use the frother with milk volume within the scale. | |
| Burning | Frother used repeatedly without cleaning | Always clean the frother after every use. |
| Too little milk | Ensure milk volume is between Max and Min capacity. | |
| Little Froth | Product heats and motor speed is normal, but milk is deteriorated | It is recommended to replace the milk. |
| No Frothing | Wrong/aging accessory | Replace with the correct/new accessory. |
| Milk used is not whole milk | Use whole milk with a fat content >3.0% for better effect. |
8. User Tips
- For best results, use whole milk (fat content >3.0%) for frothing.
- Always pour milk into the frother before operation to prevent dry burning or overheating.
- For beverages like coffee or hot chocolate, froth/heat the milk first, then prepare your drink.
- The cold frothing function uses room-temperature milk. While it produces cold foam, the frother will generate some heat during the process.
- The optimal temperature for heating milk is 60-70°C. This range preserves milk's molecular structure and nutrients while enhancing taste and flavor.
- Before each use, check the frother's interior for any dirt and clean if necessary.
- Be mindful of capacity: if making multiple servings, consider that the frother might be too small for two large cups at once.
- When cleaning, remember to remove the whisk by hand and use a sponge with water to clean the interior.
9. Safety Protection Features
- Dry Burning/Overheating Protection: If the frother is turned on without milk, it may overheat or dry burn the liner. If the temperature exceeds 115°C, the dry-burning protection will activate with a continuous "beep" sound, and the frother will shut down. Allow it to cool down before restarting.
- Power Base Contact: If, after powering on, all indicator lights do not illuminate for 1 second and there is no response, the power base and the frother may have poor contact. Rotate the frother properly to ensure it is correctly connected to the power base.
10. Warranty and Support
For any issues with the product, especially concerning power cord damage or malfunctions, please contact the after-sale service provider or a qualified professional for assistance. Do not attempt to repair the product yourself.
Please retain your purchase receipt for warranty purposes.