QODOSEN SR-286

Contents

QODOSEN SR-286 Multi-band Radio User Manual

Model: SR-286 | Brand: QODOSEN

1. Introduction

The QODOSEN SR-286 is an ultra-high sensitivity multi-band DSP radio receiver designed for enthusiasts and casual listeners alike. It supports a wide range of frequencies including FM, Long Wave (LW), Medium Wave (MW), and Short Wave (SW), providing comprehensive access to global broadcasts. Featuring a built-in 3200mAh 18650 lithium battery and a comprehensive power management system with Micro USB charging, this portable radio offers extended listening pleasure.

2. Package Contents

Please check the package for the following items:

  • QODOSEN SR-286 Multi-band Radio
  • 18650 Lithium Battery (pre-installed or separate)
  • USB Charging Cable
  • Cleaning Cloth
  • Carrying Case (optional, may vary by package)
QODOSEN SR-286 radio and accessories in a carrying case
Figure 2.1: QODOSEN SR-286 radio, USB cable, and cleaning cloth inside a carrying case.

3. Product Overview

Familiarize yourself with the radio's controls, ports, and display elements.

3.1. Controls and Ports

Detailed diagram of QODOSEN SR-286 radio controls and ports
Figure 3.1: Comprehensive diagram of all controls, ports, and features of the SR-286 radio.
  • Power Switch/Timing Shutdown: SLEEP/SNOOZE button.
  • Display: DISPLAY button to adjust display settings.
  • Set: SET button for various configurations.
  • Bandwidth Key/Stereo Switch/Alarm Clock Setting Key: BW button.
  • Storage Key/Tone Key/Time Zone Key/Alarm Clock Wake-up Mode Setting Key: M/TONE button.
  • Delete Key/Backlight Key: DEL button.
  • Edit or Mute/Page Name Key: EDIT button.
  • Number Key: Frequency input, radio storage, adjustment.
  • Storage/Frequency Switching Key/Clock Setting Key/Confirmation Key: PAGE/TIME button.
  • Shuttle Knob/Step Key/Silent Noise Key/Frequency Acceleration Setting Key: TUNING knob.
  • Volume Knob: VOLUME slider.
  • Headphone Jack: Standard 3.5mm audio output.
  • 5V USB Charging Port: Micro USB port for power and charging.
  • Frequency Plus Key/Up Search Key/Storage Settings Key: AUTO (Up arrow) button.
  • Frequency Reduction Key/Down Search Key/Search Settings Key: AUTO (Down arrow) button.
  • Reset Button: Located at the bottom of the unit.
  • Pull Rod Antenna: Extendable antenna for FM/SW reception.
  • External Antenna Socket: ANT. port for external antenna connection.
  • Speaker: Built-in speaker.
  • Battery Compartment: Located on the back for the 18650 battery.
Right side view of QODOSEN SR-286 radio showing volume, tuning, USB, and headphone jack
Figure 3.2: Right side view showing Volume, Tuning, USB 5V, and Headphone Jack.
Left side view of QODOSEN SR-286 radio showing external antenna jack
Figure 3.3: Left side view showing the External Antenna (ANT.) jack.

3.2. LCD Display Elements

Diagram of QODOSEN SR-286 LCD display elements
Figure 3.4: LCD display elements and their indicators.
  • Sleep Timing Display: Indicates sleep timer status.
  • Alarm Clock Display: Shows alarm time.
  • Boot Display: Power-on indicator.
  • Beep Display: Audio alert indicator.
  • Silent Display: Mute indicator.
  • Universal Time/Alarm Clock/Clock/Sensitivity/Snr/Storage Display: Various time and signal information.
  • Sensitivity/Snr Symbol Display: Signal strength and signal-to-noise ratio.
  • M KHz-frequency Unit Display: Frequency unit indicator.
  • Key Lock Display: Indicates if buttons are locked.
  • Time/Frequency Display: Main display for time or frequency.
  • Clock Second Display: Shows seconds for the clock.
  • Multi-function Content Display: Additional information area.
  • Stereo Display: Indicates stereo reception (for FM).
  • FM/MW/LW/SW Display: Indicates the currently selected band.
  • R(B)DS Display: Radio Data System information.
  • Power Display: Battery level indicator.

4. Setup

4.1. Battery Installation

  1. Locate the battery compartment on the back of the radio.
  2. Open the battery compartment cover.
  3. Insert one 18650 pointed lithium battery (3.7V) into the compartment.
  4. CAUTION: Be sure to follow the indicated battery polarity (+/-) inside the compartment to avoid damage to the device.
  5. Close the battery compartment cover securely.
Close-up of QODOSEN SR-286 battery compartment with 18650 battery inserted
Figure 4.1: Battery compartment with 18650 Li-ion battery and polarity warning.

4.2. Charging the Battery

  1. Connect the supplied USB charging cable to the Micro USB 5V port on the side of the radio.
  2. Connect the other end of the USB cable to a standard USB power adapter (not included) or a computer USB port.
  3. The radio features a built-in comprehensive power management system. The display will indicate charging status.
  4. WARNING: Do not charge except under specified charging conditions. Do not heat above 212°F (100°C) or short circuit the battery. Do not crush or modify the battery.

4.3. Antenna Connection

  • For FM and SW reception: Extend the pull rod antenna fully for optimal signal reception.
  • For LW and MW reception: The radio uses an internal magnetic rod antenna. Orient the radio for best reception.
  • External Antenna: For enhanced reception on FM, LW, MW, and SW bands, connect an external antenna (not included) to the ANT. socket on the left side of the radio.

5. Operating Instructions

5.1. Power On/Off

  • To turn on the radio, press and hold the SLEEP/SNOOZE button (red button).
  • To turn off the radio, press and hold the SLEEP/SNOOZE button again.

5.2. Adjusting Volume

  • Slide the VOLUME control on the right side of the radio up or down to increase or decrease the sound level.

5.3. Band Selection

  • Press the dedicated FM, LW, MW, or SW buttons on the front panel to switch between frequency bands.

5.4. Tuning to Stations

There are several ways to tune to a station:

  • Manual Tuning: Rotate the TUNING knob on the right side of the radio to manually scan frequencies.
  • Automatic Scan: Press the AUTO (Up arrow) or AUTO (Down arrow) buttons to automatically scan for the next available station.
  • Direct Frequency Input: Use the numeric keypad (0-9) to directly enter the desired frequency, then press SET or ENTER (if available, often implied by pressing SET after input).

5.5. Storing and Recalling Stations

  • To Store: Tune to the desired station. Press the SET button, then use the numeric keypad or METER+/METER- buttons to select a memory preset number, and press SET again to confirm.
  • To Recall: Press the METER+ or METER- buttons to cycle through stored stations, or use the numeric keypad to directly enter a preset number.

5.6. Other Functions

  • Alarm Clock: Press the ALARM button (often combined with BW or M/TONE) to set or activate the alarm.
  • Sleep Timer: Use the SLEEP/SNOOZE button to set a sleep timer, allowing the radio to turn off automatically after a set period.
  • Display Settings: Press the DISPLAY button to cycle through different display modes or adjust backlight.
  • Bandwidth Options: Use the BW button to select different bandwidths for FM and AM, which can help improve reception in noisy environments.
  • Music Mode/Vocal Mode: The radio may offer sound equalization options. Refer to the display for indicators and use the M/TONE button to switch between modes.
  • Key Lock: To prevent accidental button presses, activate the key lock function (often by long-pressing a specific button like EDIT or DEL, look for a key lock symbol on the display).

6. Maintenance

  • Cleaning: Use the provided cleaning cloth or a soft, dry cloth to wipe the radio's surface. Do not use abrasive cleaners or solvents.
  • Battery Care: To prolong battery life, avoid fully discharging the 18650 lithium battery frequently. If storing the radio for an extended period, charge the battery to about 50% and remove it from the device.
  • Storage: Store the radio in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Antenna Care: Handle the pull rod antenna gently to prevent bending or breaking.

7. Troubleshooting

If you encounter issues with your QODOSEN SR-286 radio, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
No power/Radio does not turn onBattery is dead or incorrectly installed.Charge the battery or ensure it is inserted with correct polarity.
Poor reception/StaticWeak signal, antenna not extended, interference.Extend the pull rod antenna (FM/SW). Reorient the radio (LW/MW). Try an external antenna. Move away from electronic devices causing interference.
No sound from speakerVolume too low, headphones connected, mute activated.Increase volume. Disconnect headphones. Check if mute is active (look for 'Silent Display' indicator).
Buttons unresponsiveKey lock is activated.Deactivate key lock (refer to 'Key Lock' in Operating Instructions). If still unresponsive, try resetting the device using the RESET button at the bottom.
Display shows 'NO DATA'No RDS data available for the current station.This is normal if the station does not broadcast RDS. Tune to another station or ignore.

8. Specifications

FeatureSpecification
Model NumberSR-286 (TEF6686 Receiver)
Receiving BandsFM: 64 - 108 MHz
LW: 144 - 519 KHz
MW: 520 - 1710 KHz
SW: 1711 - 27000 KHz
Limited Operating Sound SensitivityFM: S/N=30dB better than 1uV
AM: S/N=20dB better than 20uV
Signal to Noise RatioFM: better than 60dB
AM: better than 60dB
Power Supply1 x 18650 pointed lithium battery (3200mAh)
ChargingMicro USB 5V
Antenna MethodsRod antenna (FM/SW)
Magnetic rod antenna (LW/MW)
External antenna socket (FM/LW/MW/SW)
Dimensions (L x H x W)133mm x 75mm x 32mm
Audio OutputStereo Headphone Output, Independent cavity full frequency amplifier
Additional FeaturesComprehensive power management system, Music Mode, Vocal Mode, Optional frequency input radio storage, Multi-level bandwidth options, ANT optional preset amplifier
Back view of QODOSEN SR-286 radio showing frequency ranges
Figure 8.1: Back panel showing frequency ranges for FM, LW, MW, and SW.

9. User Tips

  • Explore All Bands: Don't limit yourself to just FM. Experiment with LW, MW, and especially SW to discover international broadcasts, amateur radio, and unique content.
  • External Antenna for SW: For serious shortwave listening, connecting a simple long-wire external antenna to the ANT. jack can significantly improve reception and clarity.
  • Battery Polarity: Always double-check the battery polarity when installing or replacing the 18650 battery to prevent damage.
  • Bandwidth Adjustment: If you're experiencing interference or want clearer audio on a strong signal, try adjusting the bandwidth using the BW button. A narrower bandwidth can filter out adjacent station interference.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.