Miboxer TRI-C1WR

Contents

Miboxer TRI-C1WR AC Triac Dimmer User Manual

Model: TRI-C1WR

Brand: Miboxer (Mi.Light Subordinate New Brand)

1. Introduction

The Miboxer TRI-C1WR is an advanced AC Triac Dimmer designed for smart control of traditional lighting. It integrates WiFi, 2.4G RF, and push switch dimming methods, offering versatile control options. This dimmer is compatible with the Tuya Smart APP and supports third-party voice control platforms like Amazon Alexa and Google Assistant, enabling seamless integration into your smart home system. It features trailing edge (ELV) phase-cut technology and includes built-in overheat and overload protection for safe and reliable operation.

Miboxer TRI-C1WR AC Triac Dimmer with labels for WiFi, 2.4G, Alexa, Google Assistant, and Tuya app logos

Figure 1: Miboxer TRI-C1WR AC Triac Dimmer Overview

2. Safety Information

  • Always disconnect power at the circuit breaker before installation or servicing.
  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Do not exceed the maximum load power specified for the dimmer.
  • Ensure all wire connections are secure and properly insulated.
  • Operate the device within the specified working temperature range (-10~40°C).
  • This device is designed for indoor use only.
  • The dimmer features overheat and overload protection; however, proper installation and load management are crucial.

3. Product Features

  • Multiple Control Methods: Supports WiFi, 2.4G RF, and traditional push switch dimming.
  • Smart APP Control: Compatible with Tuya Smart APP for comprehensive control, including timing settings, device sharing, Tap-to-Run automation, breaker mode, and minimum brightness adjustment.
  • Voice Control: Works with Amazon Alexa and Google Assistant for convenient hands-free operation.
  • Advanced Dimming Technology: Utilizes Trailing Edge (ELV) phase-cut technology for smooth and stable dimming.
  • Safety Features: Built-in overheat and overload protection.
  • Wide Compatibility: Suitable for single color Triac dimmable LED lamps, traditional filament lamps, and halogen lamps.
  • Wireless Range: 2.4G RF control distance up to 30 meters.
  • Multi-Zone Control: Supports individual 4-zone group lighting when paired with a compatible 2.4G remote (e.g., FUT007, sold separately).
Diagram showing Trailing Edge (ELV) phase-cut technology and overheat/load protection icon

Figure 2: Trailing Edge Technology and Protection Features

Compatible lighting series including single color Triac dimmable LED, traditional filament lamp, and halogen lamp

Figure 3: Compatible Lighting Types

4. Specifications

4.1 TRI-C1WR AC Triac Dimmer

ParameterValue
Model No.TRI-C1WR
Input Voltage100-240V~ 50/60Hz
Output Voltage100-240V~
Output CurrentMax 1.36A
Output Power150W@110V; 300W@220V
Dim MethodWiFi + 2.4G + Push
2.4G RF Control Distance30m
Wireless TechnologyWi-Fi IEEE 802.11b/g/n 2.4GHz
Working Temperature-10~40°C
Dimensions49mm x 49mm x 25mm
Weight0.06kg
MaterialABS
CertificationCCC, CE, ROHS

4.2 FUT007 4-Zone Remote (Optional, sold separately)

ParameterValue
Model No.FUT007
Voltage3V (2x AAA batteries, not included)
Transmission Frequency2.4GHz
Modulation MethodGFSK
Transmitting Power6dBm
Standby Power Consumption5uA
Control Distance30m
Dimensions53mm x 21.5mm x 110mm
Weight0.06kg
FUT007 4 Zone CCT/Single Remote Controller

Figure 4: FUT007 Remote Controller

FUT007 remote with battery compartment open, showing space for 2xAAA batteries

Figure 5: FUT007 Remote Battery Installation (2x AAA batteries needed)

5. Installation and Setup

5.1 Wiring Diagram

Follow the diagram below carefully to connect the TRI-C1WR dimmer to your electrical circuit and lighting fixture. Ensure power is OFF before starting any wiring.

Wiring diagram for Miboxer TRI-C1WR AC Triac Dimmer showing input (N, L), output (N, L1), and push switch connections (S1, S2)

Figure 6: TRI-C1WR Connection Diagram

  • Connect the AC input (Live 'L' and Neutral 'N') to the 'INPUT' terminals.
  • Connect the lighting fixture (Triac dimming LED light, Filament lamps, or Halogen lamps) to the 'OUTPUT' terminals (Neutral 'N' and Live 'L1').
  • For push switch control, connect a standard momentary push switch to the 'S1' and 'S2' terminals.
  • Attention: Please check and ensure that all cables are correctly connected before turning on the power, otherwise the dimmer may be damaged.
  • Wire preparation: Strip 7mm of wire insulation. Use wires with a cross-section of 0.5-1.5mm².

5.2 Tuya Smart APP Setup

  1. Download the "Tuya Smart" app from your smartphone's app store (iOS or Android).
  2. Register or log in to your Tuya Smart account.
  3. Power on the TRI-C1WR dimmer. The indicator light should blink, indicating it's in pairing mode. If not, refer to the app's instructions for resetting the device to pairing mode.
  4. In the Tuya Smart app, tap '+' to add a new device.
  5. Select the appropriate device type (e.g., "Lighting" -> "Dimmer").
  6. Follow the on-screen instructions to connect the dimmer to your 2.4GHz Wi-Fi network.
  7. Once connected, you can rename the device and control it via the app.
Tuya Smart app interface showing stepless dimming, minimum brightness setting, and push dimming options

Figure 7: Tuya Smart App Control Interface

5.3 2.4G Remote Pairing (Optional)

If you have a compatible 2.4G remote (e.g., FUT007), you can pair it with the TRI-C1WR dimmer for direct RF control.

  1. Ensure the remote has batteries installed (2x AAA for FUT007).
  2. Power on the TRI-C1WR dimmer.
  3. Within 3 seconds of powering on the dimmer, press the 'ON' button of the desired zone on your 2.4G remote three times.
  4. The connected light should flash three times to confirm successful pairing.
  5. To unpair, power on the dimmer, and within 3 seconds, press the 'ON' button of the paired zone five times. The light will flash ten times to confirm unpairing.
Diagram illustrating 2.4 GHz wireless transmission for 4-zone group lighting control within 30m distance

Figure 8: 2.4G Wireless Control Range and Multi-Zone Capability

Various compatible Mi.Light 2.4G remotes including FUT006, FUT007, B1, B2, K1, FUT087, S1 series

Figure 9: Compatible Mi.Light Remote Controllers (purchased separately)

6. Operation

6.1 Tuya Smart APP Control

Once paired, use the Tuya Smart app to control your lights:

  • On/Off: Toggle the power button in the app.
  • Brightness Adjustment: Use the slider for stepless dimming.
  • Set Min Brightness: Configure a minimum brightness level to prevent flickering at very low settings.
  • Breaker Mode: Activate this mode if you only need ON/OFF functionality without dimming.
  • Timing Settings: Schedule lights to turn on/off or dim at specific times.
  • Device Sharing: Share control of the dimmer with other family members.
  • Tap-to-Run & Automation: Create custom scenes and automations based on conditions (e.g., turn on lights when motion is detected).
Tuya Smart app control features including timing, device sharing, Tap-to-Run, breaker mode, and set up min brightness

Figure 10: Advanced Tuya Smart App Features

6.2 2.4G Remote Control (with FUT007 or compatible remote)

After pairing, use the remote to control your lights:

  • On/Off: Use the master ON/OFF buttons or zone-specific ON/OFF buttons.
  • Brightness Adjustment: Use the brightness up/down buttons or the dimming ring/slider on the remote.
  • Zone Control: If using a multi-zone remote, select the desired zone (1-4) to control specific groups of lights.

6.3 Push Switch Control

A momentary push switch connected to S1/S2 terminals can provide basic control:

  • Short Press: Turn lights ON/OFF.
  • Long Press: Adjust brightness (dim up or down).

6.4 Voice Control

Integrate the TRI-C1WR with Amazon Alexa or Google Assistant via the Tuya Smart app for voice commands:

  • Ensure your Tuya Smart account is linked to your Alexa or Google Home app.
  • Use commands like:
    • "Alexa, turn on [Light Name]"
    • "Hey Google, dim [Light Name] to 50%"
    • "Alexa, turn off [Light Name]"
Image showing Breaker Mode in Tuya app and logos for Amazon Alexa, Google Assistant, and Alice voice control

Figure 11: Breaker Mode and Third-Party Voice Control Support

7. Troubleshooting

  • Light not turning on/off: Check wiring connections, ensure power is supplied to the dimmer, and verify the light bulb is functional and compatible.
  • Dimmer not responding to app/remote:
    • For app control: Ensure your Wi-Fi network is active and the dimmer is connected. Check app settings.
    • For remote control: Ensure the remote has fresh batteries and is properly paired with the dimmer. Check the 2.4G signal range.
  • Flickering lights:
    • Ensure the connected light fixture is dimmable and compatible with Triac dimmers.
    • Adjust the minimum brightness setting in the Tuya Smart app to a higher level.
    • Verify the total load does not exceed the dimmer's maximum output power.
  • Dimmer gets hot: The dimmer has overheat protection. If it frequently overheats, ensure the load is within specifications and there is adequate ventilation.
  • Cannot connect to Tuya Smart APP: Ensure your Wi-Fi is 2.4GHz (5GHz is not supported). Try resetting the dimmer to pairing mode.

8. Maintenance

  • Clean the dimmer's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ensure the dimmer is not exposed to excessive moisture or direct water.
  • Regularly check wiring connections for any signs of loosening or damage.

9. User Tips

  • For optimal performance, ensure your Wi-Fi router is within a reasonable range of the dimmer, especially if walls or obstacles are present.
  • When using the push switch for dimming, a quick press typically toggles power, while a sustained press adjusts brightness. Experiment to find the desired response.
  • If you experience issues with smart home integration (Alexa/Google Assistant), try unlinking and relinking your Tuya Smart account in the respective voice assistant app.
  • Always verify the compatibility of your light bulbs with Triac dimmers to avoid flickering or damage.

10. Warranty and Support

This product comes with a standard manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

11. Compliance and Certifications

The Miboxer TRI-C1WR AC Triac Dimmer is certified with CCC, CE, and ROHS, ensuring compliance with relevant safety and environmental standards.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.