1. Introduction
The Vgate vLinker MC+ ELM327 is a professional diagnostic adapter designed to provide comprehensive vehicle diagnostics. It supports a wide range of protocols and is compatible with various third-party applications for both Android and iOS devices. This manual will guide you through the setup, operation, and maintenance of your vLinker MC+ device.

The image displays the Vgate vLinker MC+ ELM327 device, highlighting its key features: Read/Clear Fault Code, Auto Start/Sleep, Real Time Data, MS/SW-CAN, GMLAN, OEM AT/ST Command, Reset Module, and Refresh Hidden functions.
This video provides a visual overview of the Vgate vLinker MC+ ELM327 device and its packaging contents.
2. Package Contents
Please check the package for the following items:
- 1 x Vgate vLinker MC+ (BT3.0, BT4.0, or WiFi version as purchased)
- 1 x User Manual (Quick Start Guide)

The image shows the vLinker MC+ device alongside its quick start guide, representing the typical package contents.
3. Setup Guide
Follow these steps to set up your Vgate vLinker MC+ device:
3.1. Device Variants
The vLinker MC is available in three main types:
- Type 1 (WIFI version): Compatible with iOS / Android phones.
- Type 2 (BT V4.0 version): Compatible with iOS / Android phones.
- Type 3 (BT V3.0 version): Compatible with Android phones only.

This image illustrates the three versions of the vLinker MC (WIFI, BT4.0, BT3.0) and their respective operating system compatibility (Android/iOS).
3.2. Initial Connection (Bluetooth 3.0/4.0)
- Turn on Vehicle Ignition: Ensure your car's ignition is turned on.
- Plug in Adapter: Insert the vLinker MC+ adapter into your vehicle's OBD-II port. The OBD-II port is usually located under the dashboard on the driver's side.
- Activate Bluetooth: Turn on Bluetooth on your mobile device. For iOS devices using BT4.0, *do not* connect via phone settings; connect directly within the diagnostic application. For Android devices using BT3.0, press the switch on the device first, then search for "vLinker MC-Android" in your phone's Bluetooth settings and pair.
- Open Diagnostic App: Launch your preferred diagnostic application (e.g., OBD Auto Doctor).
- Configure Connectivity: Navigate to the app's settings or "Extras" section, then select "Connectivity." Choose "BT" (or "WiFi" if applicable) and select "vLinker MC+" from the device list. If connection fails, close the app and re-enter.

This image illustrates the first steps for connecting the vLinker MC+ via Bluetooth, including turning on car ignition, pressing the device's start button, and opening phone BT settings.

This image shows the subsequent steps for connecting the vLinker MC+ within a diagnostic application, specifically configuring connectivity settings to select the device.
4. Operating Instructions
4.1. Key Functions
The Vgate vLinker MC+ offers a range of powerful diagnostic functions:
- Read/Clear Engine DTC: Diagnose and clear engine diagnostic trouble codes.
- Engine RPM: Monitor real-time engine revolutions per minute.
- Module Reset: Reset various vehicle modules.
- Module Activation: Activate specific vehicle modules for testing.
- Remote Control: Control certain vehicle functions remotely (app dependent).
- Regeneration: Initiate DPF regeneration or similar processes.
- Automatic Sleep/Start: The device automatically enters sleep mode when the vehicle is off and wakes up upon ignition, reducing power consumption.
- Battery Tester: Check the vehicle's battery status.
- Real-time Data: Display and graph thousands of generic and manufacturer-specific real-time data parameters.
- OEM Fault Code Support: Supports specific fault codes set by manufacturers.

This image highlights the powerful diagnostic features of the vLinker MC+, including powerful diagnosis, fault code reading, and real-time data display.

The image demonstrates the automatic wake-up and sleep function of the vLinker MC+, showing it starts with car ignition and sleeps after 30 minutes of car stall.
4.2. Supported Protocols
The vLinker MC+ supports a comprehensive set of protocols, ensuring compatibility with a wide range of vehicles:
- 15 ELM format protocols
- 23 STN format protocols
- Up to 64 user-defined protocols
- OBDII 5 Standard Protocols:
- SAE J1850 VPW
- SAE J1850 PWM
- ISO 9141-2
- ISO 14230-4
- ISO 15765-4
- CAN Additional Protocols:
- SAE J1939 CAN
- ISO 11898 (raw CAN)
- GMLAN Single Wire CAN (for GMW3089)
- Ford Medium Speed CAN (MS CAN)
These protocols cover almost 99% of OBDII-compliant cars on the market.

This image details the OBD2 standard protocols and additional CAN protocols supported by the vLinker MC+ device.
4.3. Compatible Software
The vLinker MC+ is compatible with popular diagnostic software:
- BimmerCode
- Torque
- FORScan
- JScan
- Auto Doctor
- OBD Fusion
- And many more (99% APP Software)
Note: While the adapter is compatible, some software functions or the software itself may require additional payment directly to the software developer.

The image displays logos of various compatible software applications such as BimmerCode, FORScan, Torque Lite, OBD Fusion, JScan, and OBD Auto Doctor.
4.4. Advanced Features
- Data buffer up to 2K bytes, UART baud rate increased to 230.4 Kbps.
- Supports almost all ELM327/ELM329 adapter software.
- Supports user-defined commands and firmware updates.
- OBD request byte up to 48 bytes for special long frame communication.
- 256-byte storage unit with over 100,000 erasable times.
- Secure bootloader for easy firmware updates.
5. Maintenance
- Keep the device clean and free from dust and moisture.
- Store the device in a cool, dry place when not in use.
- Avoid dropping or subjecting the device to strong impacts.
- Do not attempt to open or modify the device, as this will void the warranty.
6. Troubleshooting
6.1. Connection Issues
- Phone connection failure (iOS BT4.0): Ensure you are connecting to Bluetooth directly within the diagnostic software, not through your phone's general Bluetooth settings.
- Phone connection failure (Android BT3.0): Make sure to press the switch on the vLinker MC+ device *before* searching for Bluetooth devices. Then search for "vLinker MC-Android" and pair.
- General connection issues: Try restarting your vehicle's ignition, unplugging and re-plugging the adapter, and restarting your diagnostic application.
- App not detecting device: Verify that the correct connection type (Bluetooth or WiFi) is selected within the app's settings.
6.2. Software Compatibility
If certain software functions are not working, remember that some advanced features or the software itself may require additional payment to the software developer. Vgate only provides the adapter's compatibility.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Vgate |
| Model Name | Vgate vLinker ELM327 V2.2 |
| Hardware Version | Vgate vLinker ELM327 V2.2 |
| Software Version | Vgate vLinker ELM327 V2.2 |
| Item Type | Code Readers & Scan Tools |
| Certification | CE |
| Language | English |
| Special Features | Adapter Auto Sleep/User-defined operation/All OBD2 protocols |
| Operating System (BT3.0) | Android |
| Operating System (BT4.0/WIFI) | Android/IOS |
| Software Update | No |
| Supported Car Makers | For BMW/BENZ/VW/OPEL/AUDI/Toyota etc. |
| Power Consumption (Sleep) | Less than 2 mA |
| UART Data Buffer | Up to 2K bytes |
| UART Baud Rate | Up to 230.4 Kbps |
7.1. Vehicle Compatibility
The vLinker MC+ is suitable for almost all 12V vehicles manufactured from 1996 onwards that support OBD2 protocols.
- Supported: 12V Gasoline Vehicles, 12V Small Diesel Vehicles Below 6.5T.
- Not Supported: 24V Heavy duty diesel cars.

This image details the vehicle types and manufacturing years compatible with the Vgate vLinker MC+, including American, European, Japanese/Korean cars, SUVs, and Light Trucks.
8. Warranty and Support
The Vgate vLinker MC+ comes with a 1-year warranty from the date of purchase.
For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.
9. User Tips
No specific user tips were available from customer reviews or Q&A for this product at the time of manual creation. Always refer to the latest information provided by the manufacturer or community forums for additional usage advice.