1. Introduction
Thank you for choosing the Imagebon H10/H13 Pro Car DVR Holder. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new car DVR holder. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
The Imagebon H10/H13 Pro Car DVR Holder is designed to securely mount your Digital Video Recorder (DVR), GPS navigation device, or camera in your vehicle. It features adjustable, foldable, and rotatable capabilities to provide the best viewing angle and accessibility.
2. Setup and Installation
Follow these steps to properly install your Imagebon Car DVR Holder:
- Prepare the Device: If your DVR/GPS device requires a separate mounting plate, ensure it is attached to the device first.
- Attach the Bracket Base: Depending on your chosen bracket type (Suction Cup, 3M Adhesive, Telescopic, or Rotating Head), attach the base to your device. For brackets requiring screws, use the provided screwdriver and screws.
- Secure the Bracket:
- For Suction Cup Mounts: Clean the desired surface (e.g., windshield, dashboard) thoroughly. Press the suction cup firmly against the surface and engage the locking lever to create a vacuum seal.
- For 3M Adhesive Mounts: Clean and dry the desired surface. Peel off the protective film from the 3M adhesive pad and firmly press the mount onto the surface for at least 30 seconds. Allow 24 hours for the adhesive to fully cure before attaching your device.
- Attach Device to Bracket: Align the device with the bracket's attachment points and secure it. For screw-on types, ensure screws are tightened but do not overtighten.
- Adjust Angle: Adjust the bracket's arm and head to achieve your desired viewing angle. Ensure all adjustment knobs are tightened to prevent movement during driving.
3. Operating Instructions
The Imagebon Car DVR Holder offers various adjustment options to customize your device's position and viewing angle.
- Rotation: Many models feature 180-degree or 360-degree rotation capabilities for the device head or base, allowing for portrait or landscape orientation and flexible positioning.
- Angle Adjustment: The rotating head bracket allows for 180-degree rotation and 60-degree left and right adjustment. The long arm telescopic bracket can be rotated up to 270 degrees.
- Extension: Telescopic models allow for extending the arm to bring the device closer or further away.
Always ensure all adjustment knobs and levers are securely tightened after positioning your device to prevent it from shifting during vehicle movement.
4. Maintenance
To ensure the longevity and proper functioning of your Imagebon Car DVR Holder, follow these maintenance guidelines:
- Cleaning: Regularly wipe the holder with a soft, damp cloth to remove dust and grime. Avoid using harsh chemicals or abrasive cleaners, as they can damage the material.
- Suction Cup Care: For suction cup mounts, periodically clean the suction cup and the mounting surface to maintain a strong seal. If the suction cup loses its grip, wash it with warm, soapy water, rinse thoroughly, and let it air dry.
- Adhesive Mount Care: Once installed, avoid repositioning adhesive mounts frequently, as this can weaken the adhesive bond.
- Check Tightness: Periodically check all screws and adjustment knobs to ensure they are tight. Retighten if necessary.
- Storage: If not in use for an extended period, store the holder in a cool, dry place away from direct sunlight.
5. Troubleshooting
If you encounter issues with your Imagebon Car DVR Holder, refer to the following common problems and solutions:
- Holder is not sticking (Suction Cup):
- Ensure the mounting surface is clean, dry, and smooth.
- Clean the suction cup with warm, soapy water and let it air dry.
- Apply slight moisture to the suction cup before pressing it firmly onto the surface and engaging the lock.
- Device is wobbly or moves during driving:
- Check all adjustment knobs and screws to ensure they are fully tightened.
- Ensure the device is properly seated in the holder.
- Verify the mount itself is securely attached to the car surface.
- Difficulty adjusting the angle:
- Loosen the adjustment knobs slightly before attempting to change the angle.
- Do not force adjustments; if stiff, check for any obstructions.
6. Specifications
The Imagebon H10/H13 Pro Car DVR Holder is designed with the following features and dimensions:
| Feature | Description |
|---|---|
| Special Features | Adjustable, Foldable, Rotatable |
| Placement | Car Console |
| Origin | Mainland China |
| Suction Cup Diameter | 67mm - 68mm |
| Suction Cup Thickness | Up to 2mm |
| Four Corner Buckle Bracket Inside Width | 23mm |
| Suction Cup Bracket Arm Dimensions | 45mm (length), 28mm (width) - Rotates 180° left and right |
| 3M Adhesive Bracket Base Dimensions | 130mm (length), 85mm (width) - Rotates 360° |
| Rotating Head Bracket Adjustment | 180° Rotation, 60° left and right |
| Long Arm Telescopic Bracket Adjustment | Rotatable up to 270 degrees |
7. Warranty and Support
Imagebon products are manufactured to high-quality standards. For any issues or support, please contact the seller or refer to the product listing for specific warranty information. Keep your purchase receipt as proof of purchase.
8. User Tips
- Optimal Placement: Experiment with different mounting locations in your car to find the spot that offers the best visibility for your device without obstructing your view of the road.
- Dashboard Mounting: If using a suction cup on the dashboard, ensure the surface is smooth and flat. Some textured dashboards may require an adhesive mounting disc (not included) for better adhesion.
- Cable Management: Use cable clips or ties to neatly route any power or data cables from your DVR/GPS device to avoid clutter and ensure they do not interfere with driving controls.
- Temperature Considerations: Extreme temperatures can affect suction cup adhesion. In very cold weather, warm the suction cup slightly before application. In hot weather, ensure the mount is securely attached and check periodically.
