1. Introduction
This manual provides detailed instructions for setting up, operating, and maintaining your ZTE MF287 Drei 3NEO CAT6 LTE Router. Please read this manual thoroughly before using the device to ensure proper functionality and safety. The ZTE MF287 is an advanced LTE router designed to provide high-speed internet access for multiple users via Wi-Fi and Ethernet connections.
2. Safety Information
- Use only the original battery and power adapter provided with the device.
- Do not expose the device to extreme temperatures, direct sunlight, or humid environments.
- Avoid dropping or subjecting the device to strong impacts.
- Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel for assistance.
- Ensure proper ventilation around the device to prevent overheating.
3. Package Contents
- ZTE MF287 Drei 3NEO CAT6 LTE Router
- Original Battery
- Power Adapter (2 Pin CN/US plug)
4. Product Overview
The ZTE MF287 router features various ports and indicators for connectivity and status monitoring.
4.1 Rear Panel
Image: Rear panel of the ZTE MF287 router, displaying various connection ports.
- WPS Button: For quick and secure Wi-Fi connection.
- LAN1-LAN4 Ports: RJ45 Ethernet ports for wired network connections.
- TEL Port: RJ11 port for telephone connection.
- USB Port: For connecting USB devices.
- 12V/1.5A Power Input: For connecting the power adapter.
- Power Button: To turn the device on or off.
- TS-9 Antenna Ports (x2): For connecting external LTE antennas (not visible in this image but specified in interfaces).
4.2 Bottom Panel
Image: Bottom panel of the ZTE MF287 router, showing ventilation holes and product label.
The bottom panel includes ventilation for heat dissipation and a product label containing important information such as the model number, serial number, and default Wi-Fi credentials (partially obscured).
5. Setup
5.1 SIM Card Installation
- Ensure the router is powered off.
- Locate the SIM card slot (typically on the side or bottom, refer to device markings).
- Insert your activated Nano-SIM card into the slot with the gold contacts facing down and the notched corner aligned correctly.
- Gently push until the SIM card clicks into place.
5.2 Power Connection
- Connect the power adapter to the 12V/1.5A power input port on the rear of the router.
- Plug the power adapter into a suitable electrical outlet.
- Press the Power button to turn on the router. Wait for the indicator lights to stabilize.
5.3 Initial Configuration (Web Interface Access)
- Connect your computer or mobile device to the router via Wi-Fi (using the default SSID and password found on the router's label) or via an Ethernet cable to one of the LAN ports.
- Open a web browser and enter the default IP address:
192.168.0.1 - You will be prompted to enter a login password. The default password is usually 'admin' or printed on the router's label.
- Once logged in, you can configure network settings, Wi-Fi names, passwords, and other advanced options. The web interface supports German and English languages.
6. Operation
6.1 Connecting Devices
- Wi-Fi: Search for the router's Wi-Fi network (SSID) on your device and enter the Wi-Fi password. You can also use the WPS button for a quick connection.
- LAN: Connect an Ethernet cable from your device to any of the LAN1-LAN4 ports on the router.
6.2 Web Interface Navigation
The router's web interface provides comprehensive control over its functions. Below are examples of the System Information page.
Image: ZTE MF287 web interface showing System Information, LTE status, and Wi-Fi settings.
Image: Detailed status information from the ZTE MF287 web interface, including signal strength and network details.
From the System Information page, you can view:
- Status Information: SIM Card Number, IMEI, IMSI, RSSI, RSCP, RSRQ (signal quality metrics).
- Network Details: 2.4GHz and 5GHz Wi-Fi Network Names (SSIDs), Max Access Numbers, Wi-Fi Coverage.
- IP Addresses: Router's IP Address (192.168.0.1) and WAN IP Address.
- Software/Hardware Versions: Current firmware and hardware details.
You can also access:
- LTE Settings: Toggle LTE connection on/off.
- Wi-Fi Settings: Configure Wi-Fi parameters for both 2.4GHz and 5GHz bands.
- Advanced Settings: For more detailed network configurations.
- SMS: Manage SMS messages if supported by your SIM card.
7. Specifications
| Feature | Detail |
|---|---|
| Model | MF287 |
| Dimensions (without base) | 220(L) x 98(H) x 110(D) mm |
| LTE FDD Bands | B1/2/3/4/5/7/8/20/28/32 |
| LTE TDD Bands | 38/40/41 |
| UMTS Bands | 1/2/5/8 |
| GSM Bands | Quad Bands |
| Interfaces | 4x RJ45 (LAN), 1x RJ11 (TEL), 1x USB, 2x TS-9 (Antenna) |
| Wi-Fi Standard | 802.11 b/g/n/ac |
| Wi-Fi Frequency | 2.4GHz & 5GHz |
| Max Wi-Fi Users | Up to 64 |
| LTE FDD Data Rate (DL/UL) | 600/100Mbps |
| LTE TDD Data Rate (DL/UL) | 440+/10+Mbps |
| DC-HSPA+ Data Rate (DL/UL) | 42/5.76Mbps |
8. Troubleshooting
- No Internet Connection:
- Check if the SIM card is properly inserted and activated.
- Verify that the LTE indicator light is on and stable.
- Log into the web interface (192.168.0.1) and check the network status and signal strength (RSSI, RSRQ).
- Ensure your APN settings are correct for your mobile network provider.
- Slow Wi-Fi Speed:
- Reduce the distance between your device and the router.
- Minimize obstacles (walls, large furniture) between devices.
- Check for interference from other electronic devices.
- Try switching between 2.4GHz and 5GHz Wi-Fi bands.
- Cannot Access Web Interface:
- Ensure your device is connected to the router's network (Wi-Fi or LAN).
- Verify you are entering the correct IP address (192.168.0.1).
- Clear your browser's cache or try a different browser.
- Restart the router and your connected device.
- Router is Unresponsive:
- Perform a power cycle: turn off the router, unplug the power adapter, wait 30 seconds, then plug it back in and power on.
- If issues persist, a factory reset might be necessary (refer to the device's physical reset button, usually a small pinhole). Note that a factory reset will erase all custom settings.
9. User Tips
- Network Compatibility: Before purchasing or using, ensure the router's supported LTE bands are compatible with your local network provider to avoid service interruptions.
- Firmware Updates: Regularly check the manufacturer's website for firmware updates to ensure optimal performance and security.
- Signal Strength: For best performance, place the router in an open area, away from obstructions and potential interference sources. Consider using external TS-9 antennas if signal strength is consistently low.
- Password Security: Change the default Wi-Fi and web interface login passwords immediately after initial setup to enhance security.
10. Maintenance
- Keep the router clean and free from dust. Use a soft, dry cloth for cleaning.
- Do not use liquid cleaners or aerosols.
- Ensure the ventilation holes are not blocked to prevent overheating.
- Store the device in a cool, dry place when not in use for extended periods.
11. Warranty and Support
For warranty information and technical support, please refer to the documentation provided by your retailer or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.
