BowAI 3-in-1 Smart Sweeping Robot User Manual

1. Introduction

Thank you for choosing the BowAI 3-in-1 Smart Sweeping Robot. This intelligent device is designed to simplify your home cleaning routine by combining sweeping, vacuuming, and mopping functions. Featuring APP intelligent planning, anti-drop sensors, and powerful suction, it provides an efficient and quiet cleaning experience. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. Important Safety Information

• Read all instructions before using the appliance.
• Keep the robot and its accessories away from children.
• Do not operate the robot in wet environments or near water.
• Ensure the charging cable is not damaged and is properly connected.
• Avoid using the robot on high-pile carpets or uneven surfaces that may cause it to get stuck.
• Do not block the suction inlet or brushes with any objects.
• Turn off the robot and unplug it before cleaning or performing maintenance.
• If the robot will be unused for an extended period, turn off the bottom switch to conserve battery.

3. Package Contents

Verify that all items are present in the package:

• Host (Main Robot Unit) x 1
• Brushes x 2 (pre-installed on the machine at the factory)
• Mop Cloth x 1
• External Water Tank x 1
• Small Cleaning Brush x 1
• Charging Cable x 1
• User Manual x 1

4. Setup

4.1 Initial Charging

1. Before first use, ensure the robot is fully charged. Connect the charging cable to the robot and a power source.
2. Charge the robot for approximately 5 hours for optimal initial battery conditioning.

4.2 Attaching the External Water Tank and Mop Cloth

1. Fill the external water tank with clean water (up to 135ml capacity).
2. Attach the mop cloth securely to the bottom of the external water tank.
3. Align the external water tank with the designated slot on the robot's underside and gently push until it clicks into place.

4.3 Installing Side Brushes

The side brushes are typically pre-installed. If not, gently push them onto the designated posts on the robot's underside until they click into place.

5. Operation

5.1 Powering On/Off

1. Locate the main power switch on the underside of the robot. Press 'O' when not in use or charging, and then turn on the top switch for use.
2. Press the power button on the top of the robot to start or pause cleaning.

5.2 APP Intelligent Control

The BowAI robot can be controlled via a mobile application, offering advanced features and convenience.

1. Download the APP: Scan the QR code in the included manual or search for the 'BowAI' app in your mobile app store.
2. Connect via Bluetooth: Ensure your robot's power is on and Bluetooth is enabled on your smartphone. Follow the in-app instructions to pair your device.
3. Cleaning Modes: The APP allows you to select various cleaning modes:
   • Free Cleaning: Whole house cleaning without specific planning.
   • Schedule Cleaning: Set specific times for the robot to clean automatically.
   • Edge Cleaning: Focuses on cleaning along walls and furniture edges.
   • Bow Sweep: Utilizes a planned, efficient bow-shaped path for thorough coverage.
4. Status Monitoring: View the robot's current status, battery level, and cleaning progress directly from the app.

5.3 Obstacle Avoidance and Anti-Drop

The robot is equipped with intelligent sensors to navigate your home safely.

• Anti-Drop Sensors: Three sets of anti-drop sensors on the bottom prevent the robot from falling down stairs or ledges.
• Obstacle Avoidance: The robot is sensitive to various environments and will reverse direction after encountering object collision. It can also climb obstacles up to 1.8cm high.

5.4 Quiet Operation

The robot operates at a low noise level, typically below 70dB, ensuring it does not disturb your daily activities.

6. Maintenance

6.1 Cleaning the Dust Box

The 510ml sealed dust box should be cleaned regularly, ideally once a week, to maintain optimal suction performance.

1. Open the top cover of the robot.
2. Remove the dust box by pulling it upwards.
3. Empty the dust and debris into a trash bin.
4. Clean the filter layers inside the dust box using the small cleaning brush.
5. Rinse the dust box with water if necessary, ensuring it is completely dry before re-inserting.
6. Place the dust box back into the robot and close the top cover.

6.2 Refilling the Water Tank and Cleaning the Mop Cloth

For effective mopping, ensure the water tank is filled and the mop cloth is clean.

1. Remove the external water tank from the robot.
2. Open the water tank cap and refill with clean water.
3. Detach the mop cloth from the water tank.
4. Wash the mop cloth by hand or machine. Allow it to air dry completely.
5. Reattach the clean, dry mop cloth to the water tank and re-insert the tank into the robot.

6.3 Cleaning Brushes and Sensors

1. Regularly check the side brushes for tangled hair or debris and remove them.
2. Wipe the anti-drop sensors and charging contacts on the robot's underside with a dry cloth to ensure proper function.

7. Troubleshooting

8. Specifications

9. User Tips

• For best mopping results, ensure the mop cloth is damp but not dripping wet before attaching it to the water tank.
• Regularly check the main brush and side brushes for hair entanglement, especially if you have pets.
• If the robot seems to lose power quickly, ensure the bottom switch is turned off when not in use, as Bluetooth connectivity can consume standby power.
• The robot is designed for hard floors and low-pile carpets. Avoid using it on thick rugs where it might get stuck.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the official BowAI website. Keep your purchase receipt as proof of purchase.

11. Product Video

Watch this video for a visual guide on the robot's features and operation: