Introduction
This instruction manual provides essential information for the safe and effective use of your Hi-Spec 14-piece Nut and Bolt Extractor Socket Set. This specialized tool set is designed to remove damaged, rusted, or painted nuts and bolts that standard sockets cannot grip. Please read this manual thoroughly before use and retain it for future reference.

Package Contents
Your Hi-Spec 14pc Nut and Bolt Extractor Socket Set includes the following items:
- 13 x 3/8-inch Square Drive Extractor Sockets (Sizes: 1/4", 5/16", 3/8", 10mm, 7/16", 12mm, 1/2", 13mm, 9/16", 5/8", 17mm, 11/16", 3/4")
- 1 x 1/4-inch to 3/8-inch Drive Hex Socket Adaptor
- 1 x Durable Storage Case

Specifications
| Feature | Detail |
|---|---|
| Material | Chromium-vanadium Steel (Cr-Mo) |
| Coating | Black Manganese Phosphate (for wear and rust resistance) |
| Drive Size | 3/8 inch Square Drive (for sockets) |
| Adaptor | 1/4 inch to 3/8 inch Drive Hex Socket Adaptor |
| Socket Sizes (SAE) | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" |
| Socket Sizes (Metric) | 6.35mm, 8mm, 9.5mm, 10mm, 11mm, 12mm, 12.7mm, 13mm, 14mm, 16mm, 17mm, 17.5mm, 19mm |
| Case Dimensions | 167mm x 95mm x 40mm (6.6in x 3.7in x 1.5in) |
| Weight | 710g (1.6lb) |

Setup
Before using the extractor set, ensure you have appropriate safety gear, including safety glasses and gloves. This set is designed for use with a 3/8-inch square drive ratchet, breaker bar, or impact wrench. If your drive tool is 1/4-inch hex, use the provided adaptor.
- Identify the Fastener: Determine the size of the damaged nut or bolt head.
- Select the Correct Socket: Choose an extractor socket that is slightly smaller than the damaged fastener. The internal spiral flutes are designed to bite into the fastener, so a snug fit is crucial.
- Attach to Drive Tool: Securely attach the selected extractor socket to your 3/8-inch square drive tool. If using a 1/4-inch hex drive, first attach the 1/4-inch to 3/8-inch hex socket adaptor to your drive tool, then attach the extractor socket to the adaptor.
Operating Instructions
The unique universal lobular design with internal reverse spiral flutes allows these sockets to grip and extract damaged, rusted, or painted fasteners effectively.

- Position the Socket: Place the chosen extractor socket firmly over the damaged nut or bolt head. Ensure it is seated as deeply and squarely as possible.
- Apply Pressure and Turn: Apply steady, firm pressure to the drive tool while slowly turning counter-clockwise (for standard right-hand threads) to loosen the fastener. The spiral flutes will dig into the fastener, creating a secure grip.
- Continue Extraction: Once the socket has a firm grip, continue to turn the drive tool to extract the damaged fastener. If using an impact wrench, use short bursts to avoid further damage to the fastener or tool.
- Remove Fastener from Socket: After extraction, if the fastener is stuck in the socket, you may need to tap the socket gently on a hard surface or use a punch to dislodge it.
Safety Warning:
- Always wear appropriate eye protection.
- Do not use excessive force that could damage the tool or cause injury.
- Ensure the socket is fully engaged on the fastener before applying torque.
- Keep hands clear of moving parts.
Maintenance
Proper maintenance will extend the life and performance of your extractor socket set.
- Cleaning: After each use, wipe down the sockets and adaptor with a clean cloth to remove dirt, grease, and debris. For stubborn grime, use a mild degreaser and dry thoroughly.
- Storage: Store the set in its original durable storage case in a dry environment to prevent rust and corrosion.
- Inspection: Periodically inspect sockets for any signs of wear, cracks, or damage. Do not use damaged tools.
- Rust Prevention: The black Manganese phosphate coating provides good rust resistance, but for prolonged storage in humid conditions, a light coat of rust-preventative oil can be applied.
Troubleshooting
- Socket slips on fastener:
- Ensure you have selected the correct size socket. It should be slightly smaller than the fastener to allow the flutes to bite. Apply firm, steady pressure while turning.
- Fastener is too tight to remove:
- Consider applying penetrating oil to the fastener and allowing it to soak. For extremely stubborn fasteners, controlled heat (e.g., with a heat gun, not an open flame) may help expand the surrounding material, but exercise extreme caution.
- Socket is stuck on fastener after removal:
- Gently tap the socket on a sturdy surface. If necessary, use a punch or a screwdriver through the square drive opening to push the fastener out from the back.
User Tips
- Always try the smallest possible socket that will fit over the damaged fastener. This maximizes the grip of the spiral flutes.
- For best results, use a breaker bar or a strong ratchet for manual operation. Impact wrenches can be used, but with caution, to avoid further rounding the fastener if the socket isn't fully engaged.
- When working on rusted fasteners, pre-treating with a good quality penetrating oil can significantly ease removal.
- Keep the sockets clean and free of debris to ensure optimal performance and longevity.
Warranty and Support
Hi-Spec tools are manufactured to high-quality standards and are designed for durability and performance. For any questions regarding product defects, performance issues, or general inquiries, please contact the seller or manufacturer's customer support. Please retain your proof of purchase for warranty claims.
This product is made and tested to exceed ISO & ANSI International Quality Standards.
