1. Introduction
The JIKONG SMART BMS (Battery Management System) is an intelligent protection board designed for high-capacity series lithium battery packs. It offers comprehensive management functions including voltage collection, large current active equalization, overcharge and discharge overcurrent and over-temperature protection, coulometer, Bluetooth communication, and optional GPS remote capabilities. This BMS is compatible with various battery types, including lithium iron phosphate, ternary lithium, and lithium titanate.
The protection board utilizes energy transfer active balancing technology with independent intellectual property rights, enabling a maximum continuous equalizing current of 2A. This advanced balancing ensures battery consistency, extends battery life, and delays battery aging. It supports 4S-8S battery strings and a continuous charge/discharge current of 200A.
A dedicated mobile application (APP) is available for both Android and iOS operating systems. The APP connects to the BMS via Bluetooth, allowing users to monitor battery status in real-time, modify various operating parameters, and control charge/discharge switches. Its compact size, ease of operation, and comprehensive functionality make it suitable for a wide range of applications, including small sightseeing cars, scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.


2. Specifications
The main technical specifications for the JK-B2A8S20P protection board are detailed below:
2.1. General Specifications
- Brand Name: EZKABO / JIKONG
- Type: LiFePO4 Battery BMS
- Handware or Smart: SMART BMS
- Balance Function: Active Balanced BMS
- Charge and Discharge Port: Common Port BMS
- Certification: CE, RoHS
- Origin: Mainland China
- Usage Scenario: Power BMS, Energy Storage BMS, 3C Digital BMS
- Suitable for battery type: lithium iron phosphate, ternary lithium, lithium titanate and other battery types.
2.2. Electrical Parameters
| Technical Indicator | Value |
|---|---|
| Number of NCM strings | 3~8 |
| Number of LFP strings | 4~8 |
| Number of LTO strings | 7~8 |
| Equilibrium mode | Active equalization |
| Equalizing current | 2 A |
| Internal resistance of main circuit | 0.5 mΩ |
| Continuous discharge current | 200A |
| Maximum discharge current | 350A |
| Overcurrent protection (adjustable) | 10~200 A |
| RS485 communication interface | Support, optional (CAN/RS485 can only be one of two) |
| CAN communication interface | Support, optional (CAN/RS485 can only be one of two) |
| Display interface | Have |
| Entry cable | Common Port |
| Single voltage range | 1~5V |
| GPS (optional) | Support (one of RS485 and GPS) |
| Heating function | Support customization |
| Voltage acquisition accuracy | ±5 mV |
| Overcharge protection voltage | 1.2~4.35V adjustable |
| Overcharge release voltage | 1.2~4.35V adjustable |
| Overcurrent release time | 2~120S adjustable |
| Over discharge protection voltage | 1.2~4.35V adjustable |
| Over discharge recovery voltage | 1.2~4.35V adjustable |
| Temperature detection quantity | 3 |
| Temperature protection | Yes |
| Short circuit protection | Yes |
| Coulometer SOC | Yes |
| Bluetooth function | Support Android and iOS |


2.3. Physical Characteristics
- Dimensions: 153mm × 126mm × 17.6mm
- Weight: Approximately 349g

2.4. Environmental Conditions
- Operating Temperature Range: -40°C to 70°C
- Power Requirement: 20V to 100V
- Power Consumption: Balanced state 10mA@100V, Unbalanced state 6mA@100V
3. Setup
3.1. Unpacking and Inspection
Upon receiving the product, carefully unpack it. Ensure the packaging box and the protection board are handled with care and not inverted. Before unpacking, check for any signs of impact marks or damage to the package.3.2. Wiring Diagram
The JK-B2A8S20P protection board is designed for lithium battery packs with 8 strings of cells. Follow the wiring diagram carefully to ensure correct installation. Connect the wires from the negative electrode to the positive electrode according to the corresponding string number. After connecting the equalizing wire, use a multimeter to confirm the connections before inserting the protection board. Incorrect wiring can lead to abnormal operation or severe damage.


3.3. Connector and Interface Description
The BMS features various connectors and interfaces. Refer to the diagram below for their positions and functions:

| Connector | Pin Number | Name | Definition |
|---|---|---|---|
| P1 | 1 | B- | Total negative electrode of battery |
| 2 | B1 | Positive electrode of the 1st string battery | |
| 3 | B2 | Positive electrode of the 2nd string battery | |
| 4 | B3 | Positive electrode of the 3rd string battery | |
| 5 | B4 | Positive electrode of the 4th string battery | |
| 6 | B5 | Positive electrode of the 5th string battery | |
| 7 | B6 | Positive electrode of the 6th string battery | |
| 8 | B7 | Positive electrode of the 7th string battery | |
| 9 | B8 | Positive electrode of the 8th string battery | |
| 10 | B+ | Power supply of protection board, connected to battery positive | |
| P2 | Heating interface | Heating interface | |
| P3 | LCD interface | LCD interface | |
| P4 | External GPS interface | External GPS interface | |
| P5 | RS485/CAN interface | RS485 / CAN interface (one out of two) | |
| P6 | 1 | T1A | Pin A of the first temperature sensor |
| 2 | T1B | Pin B of the first temperature sensor | |
| 3 | T2A | Pin A of the second temperature sensor | |
| 4 | T2B | Pin B of the second temperature sensor | |
| D1 | Bluetooth connection indicator | Indicator is always on when Bluetooth is connected, flashes when disconnected. | |
| C- | External load or charger negative pole | Connected to external load or charger negative pole | |
| B- | Battery negative electrode | Connected to battery negative electrode | |
3.4. APP Installation
The JIKONG BMS mobile application is essential for monitoring and controlling the device. You can download the APP by scanning the QR code below:

Alternatively, for iOS devices, search for "JIKONG BMS" in the APP Store. For Android devices, you can download it from: https://www.pgyer.com/Cfq3
3.5. Powering On the Protection Board
After confirming all wiring is correct and secure, the protection board can be powered on. The BMS does not have a physical power-on switch; it is designed for charging activation. This means that after the battery pack is assembled, you need to connect a charger with a voltage at least 2V higher than the battery pack voltage to activate the BMS.
4. Operating Instructions
4.1. APP Device Connection
- Enable Bluetooth on your mobile phone.
- Open the JIKONG BMS APP.
- Click the scan icon (usually in the upper left corner) to search for available devices.
- Once scanning is complete, select the name of the device you wish to connect to (e.g., "JK-B1A24S").
- For the first connection, the APP will prompt for a password. The default password is "1234".
- After successful connection, the APP will automatically save the password for future connections. Subsequent connections will not require re-entering the password.

4.2. APP Status Viewing
The real-time status interface in the APP is divided into three main areas:
- Battery Comprehensive Information: Displays overall battery status, including total voltage, current, power, remaining capacity, cycle count, and temperatures.
- Single Cell Voltage: Shows real-time voltage data for each individual cell. Red indicates the lowest voltage cell, and blue indicates the highest voltage cell.
- Equalizing Line Resistance: Displays the resistance of the equalizing lines, which is a preliminary calculation to detect wrong connections or poor contact. Yellow indication means equalization cannot be started.

4.3. APP Parameter Setting
To modify the BMS's operating parameters, you must first click the "Authorization Setting" button and enter the parameter setting password (default: "123456"). Once authorized, you can adjust various settings such as:
- One-key LFP/NCM/LTO: Quickly set parameters for specific battery chemistries.
- Monomer Quantity: Set the number of cells in your battery pack.
- Battery Capacity (AH): Define the design capacity of your battery.
- Trigger Balance Differential Pressure: Set the voltage difference threshold for active balancing to begin.
- Voltage/Current Calibration: Calibrate the accuracy of voltage and current readings.
- Overcharge/Undervoltage Protection: Configure voltage thresholds for protection and recovery.
- Automatic Shutdown Voltage: Set the lowest voltage at which the BMS will shut down.
- Overcurrent Protection: Adjust thresholds and delays for charging and discharging overcurrent protection.
- Short Circuit Protection: Configure delay and release times for short circuit protection.
- Over/Under Temperature Protection: Set temperature thresholds for protection and recovery during charging and discharging.
- MOS Over Temperature Protection: Define temperature limits for the MOS transistors.
- Device Address, Discharge Precharge Time, User Private Data, Connecting Wire Resistance: Advanced settings for specific applications.

4.4. APP BMS Control
The BMS control page in the APP allows you to manage various functions:
- Charging Switch: Controls the charging function (On/Off).
- Discharge Switch: Controls the discharging function (On/Off).
- Equalizing Switch: Controls the active balancing function (On/Off).
- Emergency Switch: Allows emergency charging/discharging in case of other BMS failures. It automatically turns off after 30 minutes. Use with caution as it bypasses protection functions.
- Heating Switch: Activates the heating function if supported and conditions are met (e.g., charger detected, low temperature).
- Temperature Sensor Shield: Ignores temperature-related alarms, useful if a sensor is damaged.
- GPS Heartbeat Detection: Monitors GPS connection status. If disconnected for over 24 hours, it triggers an alarm and closes charge/discharge switches.
- Multiplexing Port Switching: Switches the output function of the multiplexing port between RS485 and CAN (if supported by hardware).

4.5. Smart Energy Working Modes
The BMS supports different working modes to optimize energy management:
- Storage Mode: In transportation, storage, offline, or wireless transmission off mode, the BMS does not consume battery pack current.
- Normal Working Mode: When the charger is inserted in storage mode and off mode, the BMS will immediately return to normal working mode, and all protection, equalization, and communication functions will return to normal.
- Standby Mode: When the battery pack is in a static state (no charge and discharge current and no equilibrium current), the BMS will automatically enter standby state after a set time (1-30 days can be set) is exceeded.
- Shutdown: To prevent power waste for a long time and battery pack damage, the BMS has an automatic shutdown voltage. The BMS automatically shuts down when a cell falls below the shutdown voltage.

5. Maintenance
Regular maintenance of your BMS is crucial for its longevity and optimal performance. While the JIKONG BMS is designed for durability, periodic checks and proper handling are recommended.
5.1. General Care
- Keep the BMS clean and free from dust and debris.
- Ensure all connections remain tight and free from corrosion.
- Avoid exposing the BMS to extreme temperatures or humidity outside its specified operating range.
5.2. Software Updates
Periodically check the APP for any available updates to ensure you have the latest features and bug fixes for your BMS.
6. Troubleshooting
This section addresses common issues and their solutions for the JIKONG SMART BMS.

6.1. No Power On
- Check B+ Line: Ensure the last "B+" line is connected to the battery's total positive pole.
- Charge Activation: The BMS activates via charging. Ensure the charger voltage is at least 4V above the battery pack voltage.
- Charger Output: Verify that the charger is providing voltage output.
6.2. Voltage Inaccuracy
- Calibration: Measure the actual total voltage of the battery pack with a multimeter. Enter this value into the "Voltage Calibration" setting in the APP to correct the reading.
6.3. Current Inaccuracy
- Parallel Connections: Ensure both B- and P- are connected in parallel using two 7AWG wires. Incorrect connection can lead to current errors.
- Calibration: Use a clamp meter to measure the actual current of the battery pack. Enter this value into the "Current Calibration" setting in the APP. Higher actual current leads to higher calibration accuracy.
6.4. Capacity Inaccuracy
- Set Battery Capacity: First, set the battery's design capacity in the APP. It can be set slightly higher than the actual capacity (e.g., 120AH or 150AH for a 100AH battery).
- Discharge and Charge Cycle: Fully discharge the battery until the BMS triggers single undervoltage protection. Then, fully charge the battery without interruption until the BMS triggers single over-voltage protection. The APP will then automatically update the capacity and SOC readings.
6.5. Mismatch in String Number
- Parameter Settings: Verify that the "Number of Single Unit" parameter in the APP is set correctly.
- Collection Line Check: If there is no voltage in the middle of 2S or more strings, check if the collection line is disconnected.
6.6. Six Security Protection Features

- Overcharge Protection: Prevents over-charging, which affects battery life.
- Short Circuit Protection: Automatic protection when a short circuit occurs.
- Over Discharge Protection: Prevents the battery from running out.
- Overcurrent Protection: Prevents the current from exceeding the battery range.
- ALL-IN Protection: Prevents cable drop or poor contact.
- Over Temperature Protection: Prevents the battery from overheating.
7. User Tips
- Parallel BMS Operation: If you need to use multiple BMS units in parallel, a Fast Class T Fuse must be added to each battery pack. Alternatively, a discharge diode (high power diode selected according to load) can be used.
- Charger Selection: Always use a special charger designed for your battery type (e.g., LiFePO4 charger for LiFePO4 batteries). Do not use lead-acid battery chargers, as this can damage the BMS and lead to unprotected overcharging. For LiFePO4, charger voltage = 3.65V per cell; for ternary lithium, charger voltage = 4.25V * number of battery strings.
- BMS Current Rating: The BMS current rating should be chosen based on the current limit of your controller, which in turn depends on the motor's power. Always select a BMS with a continuous current rating greater than the controller's current limit, leaving a margin for safety.
- Reliability: Users have reported good long-term performance, indicating the BMS is a reliable choice for battery management.
8. Warranty and Support
8.1. Product Warranty Terms
Chengdu Jikong Technology Co., Ltd. provides a quality warranty for the hardware products and accessories sold. The warranty period for this lithium battery intelligent protection board is one year from the date of shipment or installation. If the product is not installed within 30 days of shipment due to user schedule, the warranty period will commence from the 31st day after shipment.
During the warranty period, if a failure occurs due to quality reasons, the company reserves the right to repair or replace the product. Replaced products may be new or near-new.
The warranty does not cover product failure or damage caused by:
- Wrong use or improper maintenance.
- Use of software, accessories, parts, or other items not provided by Chengdu Jikong Technology Co., Ltd.
- Unauthorized disassembly, modification, or incorrect use.
- Use beyond the specified technical specifications.
- Improper transportation, handling, or storage.
- Failure or damage due to non-quality reasons (e.g., natural disasters, accidents).
8.2. Copyright Notice
The copyright of all products, software, and documents sold by Chengdu Jikong Technology Co., Ltd. belongs to Chengdu Jikong Technology Co., Ltd. All copyrights are reserved. The purchase of this product does not grant the user any copyright permissions. Any reproduction or sale without written permission from Chengdu Jikong Technology Co., Ltd. is strictly prohibited.
8.3. Contact Information
For support or inquiries, you may contact:
- Email: ansuolt@126.com
- WhatsApp: +8617784306842
9. Transportation and Storage
9.1. Transportation
Packed products can be transported using ordinary means, provided they are protected from direct rain, snow, and severe bumps. Do not transport with corrosive substances such as acids or alkalis.9.2. Storage
Packaged products should be stored in a permanent warehouse under the following conditions:
- Temperature: 0°C to 35°C
- Relative Humidity: No more than 80%
- Environment: The warehouse must be free of acid, alkali, corrosive gases, strong mechanical vibration, impact, and strong magnetic fields.
10. Frequently Asked Questions (FAQ)

10.1. What is the difference between a 'same port' and a 'separate port' BMS?
For a 'same port' BMS, the negative charge and negative discharge are connected to the same point (P-) on the protection board. This means the charge and discharge currents share a common interface and are typically the same (e.g., 100A charge and 100A discharge). For a 'separate port' BMS, the negative charge (C-) and negative discharge (P-) are separated and connected to different points on the protection board, allowing for different charge and discharge current ratings.
10.2. What is the relationship between battery capacity and BMS current?
The battery capacity and the BMS current rating do not have a direct relationship. The primary factor is the continuous current required by your application, which is determined by the current limitation of your controller. The larger the controller's current limit, the larger the selected BMS continuous current should be. Battery capacity itself does not directly dictate the BMS current rating.
10.3. What kind of charger should I choose?
Always use a special charger designed for your specific battery chemistry. For LiFePO4 batteries, use a dedicated LiFePO4 charger. Do not use lead-acid battery chargers, as this can cause high-voltage breakdown of the BMS MOS tubes and lead to unprotected overcharging. The correct charger voltage for LiFePO4 batteries is 3.65V per cell; for ternary lithium batteries, it is 4.25V multiplied by the number of battery strings.
10.4. How much current should I choose for the BMS?
The BMS current rating depends on the current limit of your controller, which is determined by the motor's power. For example, if a motor is 64V, 1000W, the current is 1000W / 64V = 15.6A. In this case, the controller's current limit must be greater than 15.6A, and the BMS's current limit must be greater than the controller's current limit. Always select a BMS with a sufficient margin above your maximum expected current draw.