1. Product Overview
The SP648E is a versatile SPI three-channel addressable RGB LED controller designed to enhance your lighting experience with dynamic, music-synchronized, and DIY effects. It offers flexible control options via a mobile application and a 2.4G RF remote control, catering to various ambiance needs.
Key Features:
- Supports both mobile APP and 2.4G RF remote control.
- Capable of outputting 4 different lighting effects, suitable for diverse applications.
- Compatible with common single-wire LED driver ICs.
- Includes built-in music and non-music effects, with multi-parameter adjustability.
- Features a grouping control function, allowing any combination control of 4 channels.
- Built-in trigger function for customizing trigger effect parameters.
- Wide DC5V~24V working voltage, with power supply reverse connection protection.
- Automatic saving of setting parameters.
- Supports OTA firmware upgrades.
Product demonstration video showing various lighting effects and music synchronization.
2. Specifications
| Attribute | Value |
|---|---|
| Model Number | WM-SP648E |
| Brand Name | WELLMEET |
| Item Type | Dimmers |
| Is Smart Device | Yes |
| Certification | ROHS, CE |
| Material | PLASTIC |
| Origin | Mainland China |
| Working Voltage | DC5V~24V |
| Working Current | 12mA~25mA |
| Working Temperature | -20°C~60°C |
| Dimensions (Controller) | 55mm * 26mm * 12mm (not including wires) |
| Package Length | 8 cm |
| Package Width | 6 cm |
| Package Height | 2 cm |
| Package Weight | 0.05 kg |

Product dimensions for the SP648E controller and remote control.
3. Safety and Installation Precautions

Important installation precautions.
- This product should be debugged and installed by someone with professional qualifications.
- This product is not waterproof and needs to be protected from sunlight and rain. If installed outdoors, please use a waterproof box.
- Good heat dissipation conditions will extend the service life of LED controllers. Please install the product in a well-ventilated environment.
- Do not install or use this type of product in areas with lightning, strong magnetic fields, or high voltage.
- Check if the output voltage of the LED power supply used meets the requirements of the product voltage range.
- The diameter and size of the wires used must be sufficient to load the LED lighting fixtures connected, and ensure that the wiring is secure to prevent wires from passing through accidents triggered by heat or poor contact.
- Before powering on and debugging, ensure that all wiring is correct to avoid damage to the lighting fixtures due to wiring errors.
4. Setup
4.1. Wiring Connection
The SP648E controller requires a DC5V-24V power supply, dependent on the voltage of your LED strip lights. Ensure the power supply matches the LED strip voltage to prevent damage.

Connection diagram for power supply, controller, and LED strip.

Detailed wiring diagram for the SP648E controller.
Wiring Steps:
- Connect the DC5V-24V power supply to the controller's power input.
- Connect the LED light strip to the controller's output terminals, ensuring correct polarity for GND, DAT, and VCC.
- Verify all connections are secure before powering on.
4.2. App Installation
The SP648E controller can be controlled via a mobile application named "SceneX".
- For Apple devices, iOS 10.0 or higher is required.
- For Android devices, Android 4.4 or higher is required.
- Search for "SceneX" in the App Store (iOS) or Google Play (Android).
- Alternatively, scan the QR code below to download and install the app.

Scan the QR code to download the SceneX app.
4.3. Remote Control Pairing
The 2.4G RF remote control (RA3) is matched with the SP648E controller.
- One-to-many control: One remote control can control multiple controllers.
- Many-to-one control: Each controller can bind up to 5 remote controls.
- To bind/unbind the remote control: Short press the 'ON' button on the remote to turn on the light. Long press the 'ON' button within 20 seconds after the controller is powered on to bind/unbind.
- To unbind all remote controls: Short press the 'OFF' button to turn off the light. Long press the 'OFF' button within 20 seconds after the controller is powered on, first turn off the lights completely, and then long press the 'OFF' button to clear all bound remote controls.
5. Operating Instructions
5.1. App Control
After installing the "SceneX" app:
- Open the app and click the '+' button in the top right corner of the home page to add a device. Once added, click the device to enter the control page.
- Rename the controller by clicking the settings button in the upper right corner.
- The SP648E can output 4 different signals. You can control channels 1-4 individually or control all channels uniformly.
- After adjusting the effect of each channel, click the save button in the upper right corner to save the current lighting effect settings to scenes. The SP648E supports 9 scenes, which can be recalled via the app or RF remote.
- Set up to five timing events by clicking the timer button in the upper right corner. Note that timing events are deleted if the controller loses power.
- On the effects page, choose from various music and non-music effects. Adjust speed, brightness, effect length, and color for specific effects.
- On any single-channel page, use the copy button in the upper right corner to verify the color and copy the channel's effect to another channel.
- On the trigger page, there are four triggers with preset and dynamic effects. Click the trigger button to switch between preset and custom effects. You can click any trigger area to enter the dynamic effect selection interface. Confirm the selected effect with the upper right corner button or cancel with the upper left corner button. Long press a trigger area to modify its name, lasting time, and channel.
- On the grouping page, click the '+' button in the lower right corner to add groups. Select the channels to associate with the group and set the group name. The group page displays added groups, allowing control of the effect mode for associated channels.
5.2. Remote Control

2.4G RF Remote Control (RA3) button functions.
The 2.4G RF remote control provides direct access to various functions:
- ON/OFF: Short press to turn lights on/off. Long press for binding/unbinding (see Setup section).
- MODE +/-: Adjusts lighting modes.
- BRI +/-: Adjusts brightness.
- SPEED +/-: Adjusts effect speed.
- AUTO: Cycles through collected effects.
- MUSIC: Activates music synchronization mode.
- DELAY (60s): Sets a 60-second delay for turning off.
- COLOR buttons (R, G, B, Y, C, P, W): Selects static colors (Red, Green, Blue, Yellow, Cyan, Pink, White).
- COLOR +/-: Fine-tunes color selection.

PWM Dimming: Supports 8KHz high-frequency PWM dimming with 1%-100% brightness adjustment.
6. Maintenance
To ensure the longevity and optimal performance of your SP648E LED controller:
- Keep the controller in a well-ventilated environment to ensure good heat dissipation.
- Protect the device from direct sunlight and rain, as it is not waterproof.
- Regularly check wiring connections for security and good contact.
- Clean the device gently with a dry cloth; avoid using liquids or abrasive cleaners.
7. Troubleshooting
- Lights not responding: Check power supply connection, ensure LED strip is correctly wired to the controller, and verify the remote control is paired.
- App connection issues: Ensure Bluetooth is enabled on your device, the controller is powered on, and you are within range. Try restarting the app or controller.
- Inconsistent lighting effects: Verify that the LED driver ICs are compatible and that the app settings for effects are correctly configured.
- Remote control not working: Check battery, ensure it's paired correctly, and that there are no obstructions between the remote and controller.
8. User Tips
- Group Control: The SP648E supports grouping multiple controllers for synchronized effects. Use the app's grouping function to manage several controllers simultaneously, which is useful for larger installations or multi-zone lighting.
- Music Sync Optimization: For best music synchronization, ensure the controller's built-in microphone is not obstructed, or use the mobile microphone/player streaming option in the app for more precise audio input.
9. Warranty and Support

After-sales service and warranty details.
Our LED controller products come with lifelong technical support and warranty services.
- Free Warranty: If any quality issues occur within 12 months from the date of purchase, our company will provide free repair or service replacement.
- Paid Warranty: Products exceeding the free warranty period will incur a charge for repair materials.
- Situations Not Covered by Free Warranty:
- Damage caused by excessive voltage, overload, improper operation, etc.
- Any wiring errors, water immersion (for non-waterproof products), and unauthorized repairs.
- Serious damage or deformation to the appearance caused by transportation or knocking.
- Product appearance is severely damaged or deformed.
- Damage caused by natural disasters and uncontrollable human factors, such as earthquakes, floods, fires, etc.
- Our company's maximum responsibility for factory products is to replace them with products of the same model and quantity.
- To expedite the repair or replacement process, please indicate the fault phenomenon, operating environment, and actions taken when the fault occurred to ensure a quick resolution.
- If a returned product and initial accessories are received, we promise to replace or repair them for the customer. The logistics cost of the return will be borne by the customer.
For further assistance, you may refer to the official user manual PDF: SP648E User Manual (PDF)