DongCheng DCJZ2060

Contents

DongCheng DCJZ2060 Cordless Dual Speed Drill Instruction Manual

Model: DCJZ2060 / DCJZ2060i | Brand: DongCheng

1. Introduction

Thank you for choosing the DongCheng DCJZ2060/DCJZ2060i Cordless Dual Speed Drill. This powerful and versatile tool is designed for various drilling and fastening applications in wood, metal, and for the DCJZ2060i, even masonry. Featuring a robust brushless motor, a durable 13mm metal chuck, and adjustable torque and speed settings, it offers superior performance and efficiency. Please read this manual carefully before use to ensure safe and optimal operation.

DongCheng DCJZ2060 Cordless Drill with 60Nm torque, 13mm metal chuck, and 2-speed adjustable up to 2300rpm.
Overview of the DCJZ2060 cordless drill highlighting its key features.

2. General Safety Instructions

Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury. Keep this manual for future reference.

  • Work Area Safety: Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Electrical Safety: Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions.
  • Personal Safety: Always wear eye protection. Use hearing protection when operating for extended periods. Dress properly; avoid loose clothing or jewelry.
  • Tool Use and Care: Do not force the power tool. Use the correct tool for your application. Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing power tools.
  • Battery Pack Use and Care: Recharge only with the charger specified by the manufacturer. Do not use battery packs with other power tools.

3. Package Contents

The standard package for the DongCheng DCJZ2060/DCJZ2060i typically includes:

  • DongCheng DCJZ2060/DCJZ2060i Cordless Drill (Bare Tool)
  • Instruction Manual

Note: Battery packs, chargers, and drill bits/accessories are often sold separately or as part of specific kits. Please check your specific purchase details for included items.

4. Product Components

Familiarize yourself with the main parts of your DongCheng cordless drill:

  1. 13mm Metal Chuck: For securely holding drill bits and screwdriver bits.
  2. Torque Adjustment Ring: Allows selection of 20+1 torque settings for various applications and a drilling mode.
  3. Speed Selector Switch: Toggles between two speed ranges (Low Speed: 0-600 r/min, High Speed: 0-2300 r/min).
  4. Forward/Reverse Switch: Controls the rotation direction of the chuck.
  5. Variable Speed Trigger: Controls the operating speed based on pressure applied.
  6. LED Work Light: Illuminates the work area.
  7. 20V Lithium-Ion Battery Port: For attaching the compatible 20V battery.
Diagram showing the two-speed settings (0-600 r/min for 60N-m and 0-2300 r/min for 30N-m) and torque adjustment on the DongCheng DCJZ2060 drill.
Illustration of the drill's dual-speed gearbox and torque settings for various applications.

5. Setup and Assembly

5.1. Charging the Battery (if included)

  • Connect the charger to a suitable power outlet (AC Input 220-240V).
  • Slide the 20V lithium-ion battery pack onto the charger until it clicks into place.
  • Allow the battery to charge fully. The charger indicator light will typically change color or turn off when charging is complete.
  • Disconnect the battery from the charger once fully charged.

5.2. Installing/Removing the Battery

  • Installation: Align the battery pack with the battery port on the drill handle and slide it in until it locks securely.
  • Removal: Press the battery release button (usually located on the sides of the battery pack) and slide the battery out.

5.3. Installing Drill Bits/Accessories

  • Rotate the chuck counter-clockwise to open the jaws.
  • Insert the desired drill bit or screwdriver bit into the chuck.
  • Rotate the chuck clockwise to tighten the jaws securely around the bit. Ensure the bit is centered and firmly held.
Close-up view of the 13mm metal chuck on the DongCheng DCJZ2060 drill.
Detail of the durable 13mm metal chuck for secure bit clamping.

6. Operating Instructions

6.1. Selecting Speed

  • Use the speed selector switch on top of the drill to choose between two speed ranges:
  • Position 1 (Low Speed): 0-600 r/min, ideal for driving screws and drilling larger holes in softer materials, offering higher torque (60N·m).
  • Position 2 (High Speed): 0-2300 r/min, suitable for fast drilling in wood and metal, offering lower torque (30N·m).

6.2. Adjusting Torque

  • Rotate the torque adjustment ring to select the desired torque setting (1-20) or the drill mode.
  • Lower settings (1-5) are for small screws or soft materials.
  • Medium settings (6-15) are for general screw driving.
  • Higher settings (16-20) are for larger screws or harder materials.
  • The drill symbol setting is for drilling applications, providing maximum torque without clutch engagement.

6.3. Forward/Reverse Operation

  • Push the forward/reverse switch to the left for forward rotation (drilling/tightening).
  • Push the switch to the right for reverse rotation (removing screws/backing out bits).
  • Center position locks the trigger for safety during storage or bit changes.

6.4. Drilling and Fastening

  • Place the tip of the bit on the workpiece.
  • Squeeze the variable speed trigger to start the drill. Apply gentle pressure initially, then increase as needed.
  • For drilling, maintain a steady, even pressure. For fastening, release the trigger once the screw is fully driven or the clutch engages.
  • The LED work light will activate when the trigger is pressed, illuminating your work area.
User operating the DongCheng DCJZ2060 drill, demonstrating its power and compact design.
The drill in action, showcasing its performance with 60N·m torque, 2300r/min speed, and 20V power.
A short video showcasing the drill's capabilities, including drilling into wood and metal, and driving screws.

7. Maintenance

7.1. Cleaning

  • Always disconnect the battery pack before cleaning.
  • Use a soft, damp cloth to wipe down the exterior of the tool. Do not use harsh chemicals or abrasive cleaners.
  • Keep the ventilation openings clear of dust and debris to prevent overheating.

7.2. Battery Care

  • Store battery packs in a cool, dry place away from direct sunlight and extreme temperatures.
  • Do not store battery packs in a discharged state for extended periods. Recharge them periodically.
  • Avoid dropping or damaging battery packs.

7.3. Storage

  • Store the drill and battery in a secure, dry place out of reach of children.
  • Ensure the forward/reverse switch is in the center (locked) position to prevent accidental startup.

8. Troubleshooting

ProblemPossible CauseSolution
Drill does not startBattery not charged or improperly installed; Forward/reverse switch in center position.Charge battery and ensure it's securely installed; Move forward/reverse switch to forward or reverse.
Loss of power during operationBattery charge low; Overload.Recharge battery; Reduce pressure or use a lower speed/higher torque setting.
OverheatingBlocked ventilation; Prolonged heavy use.Clear ventilation openings; Allow tool to cool down.
Chuck not holding bit securelyChuck not tightened enough; Bit shank dirty or damaged.Ensure chuck is fully tightened; Clean or replace bit.

9. Specifications

The DongCheng DCJZ2060/DCJZ2060i models share many features, with the 'i' model typically including an impact function.

Table detailing the specifications of the DongCheng DCJZ2060 and DCJZ2060i 20V Brushless Electric Drills.
Comprehensive table of technical specifications for the DCJZ2060 and DCJZ2060i models.
ParameterDCJZ2060DCJZ2060i
Charger Voltage20V (AC Input 220-240V)
Max Clamping13mm
Impact RateN/A34500bpm
No-load Speed0-600/2300rpm
Max. Torque60Nm
Max Work Capacity (Wood)38mm
Max Work Capacity (Steel)13mm
Forward and ReverseYes
LED2 gear adjustable
Weight (bare tool)1.4Kg1.5Kg
Motor TypeBrushless
CertificationCE

10. User Tips

  • Check Package Contents: Before purchasing, always verify the specific package you are ordering. Some listings are for the 'bare tool' only, meaning batteries and chargers are sold separately.
  • Battery Compatibility: Ensure you use genuine DongCheng 20V DCA batteries for optimal performance and safety.
  • Torque Settings: Experiment with different torque settings on scrap material to find the ideal setting for your specific task and material, preventing overtightening or stripping screws.
  • Drill Bit Selection: Use sharp, appropriate drill bits for the material you are working with to achieve clean holes and extend tool life.

11. Warranty and Support

DongCheng products are manufactured to high-quality standards. For warranty information, service, or technical support, please refer to the documentation provided with your purchase or contact your authorized DongCheng dealer. Keep your proof of purchase for any warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.