1. Introduction
Thank you for choosing the Deli Electronic Thermometer Hygrometer Weather Station. This high-precision device is designed to provide accurate readings of time, temperature, and humidity, making it an essential tool for monitoring your indoor environment. Its large LCD screen ensures clear visibility, and its compact design allows for versatile placement.
A detailed user manual in PDF format is available here.
2. Product Features
- Simultaneous display of time, temperature, and humidity.
- Temperature displayed with 0.1℃ precision.
- Temperature accuracy: ±1℃.
- Operating temperature range: -10℃ to 60℃.
- Powered by dual AAA batteries for long battery life (up to 12 months).
- Integrated backrest design for desktop placement with a 53° viewing angle.
- Air inlets on both sides ensure optimal air circulation for accurate data detection.
- Large 4-inch LCD screen for clear and easy-to-read display.
3. Package Contents
Please check the package for the following items:
- 1 x Deli Electronic Thermometer Hygrometer (Model DL336001)
- Note: AAA batteries are not included and must be purchased separately.
4. Product Overview
Front view of the Deli Electronic Thermometer Hygrometer, showing time, humidity, and temperature.
Back Structure Diagram
- SET: Set key
- ADJ: Adjust the setting target key
- °C/down: Unit switch key (for temperature unit and decrementing values)
- RESET: Reset key
- Vent: Air vents for sensor accuracy
- Battery compartment: Holds 1 No. 7 (AAA) battery
- Foldable bracket: Can be hidden in the fuselage for wall hanging or extended for standing.
Battery compartment and control buttons on the back.
5. Setup
5.1. Battery Installation
- Locate the battery compartment (6) on the back of the device.
- Slide open the battery compartment cover.
- Insert two AAA batteries (No. 7) into the compartment, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Ensure proper air circulation for accurate readings.
5.2. Placement
The device supports both standing and wall-hanging placement:
- Standing: Extend the foldable bracket (7) from the back of the device. Place the device on a flat surface. The 53° angle provides an optimal viewing experience.
- Wall Hanging: Fold the bracket back into the fuselage. Use a suitable hook or nail (not included) to hang the device on a wall via the designated slot.
The foldable stand allows for a 53-degree viewing angle.
6. Operating Instructions
6.1. Initial Power-On
After installing batteries, the device will automatically power on and display the current time, temperature, and humidity.
6.2. Setting Time
- Press the SET button (1) to enter time setting mode.
- Use the ADJ button (2) to adjust the hour.
- Press SET again to move to minute setting, then use ADJ to adjust minutes.
- Continue pressing SET to cycle through other time-related settings (if applicable, e.g., 12/24 hour format).
- Press SET one last time or wait a few seconds for the settings to save and exit the setting mode.
6.3. Switching Temperature Unit
Press the °C/down button (3) to switch between Celsius (°C) and Fahrenheit (°F) temperature units.
6.4. Resetting the Device
If the device malfunctions or you wish to clear all settings, press the RESET button (4). This will restore the device to its factory default settings.
7. Maintenance
7.1. Cleaning
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
7.2. Battery Replacement
When the display becomes dim or inaccurate, it's time to replace the batteries. Follow the battery installation steps in Section 5.1.
7.3. Storage
If not in use for an extended period, remove the batteries to prevent leakage and store the device in a cool, dry place.
8. Troubleshooting
- No display or dim display: Check battery installation and replace with fresh AAA batteries.
- Inaccurate readings: Ensure the device is placed in a location with good air circulation, away from direct sunlight, heat sources, or drafts. Allow some time for the sensors to stabilize after placement or battery change.
- Buttons unresponsive: Try resetting the device using the RESET button (4). If the issue persists, replace batteries.
9. Specifications
Product Parameters
| Attribute | Value |
|---|---|
| Product Name | Digital display temperature hygrometer |
| Model Number | DL336001 |
| Brand Name | Deli |
| Product Material | ABS |
| Color | White |
| Product Size | 110mm x 18mm x 60mm |
| Theory | Multifunctional Thermometer |
| Power Type | AAA Battery (x2) |
| Battery Included | No |
| Certification | None |
| Origin | Mainland China |
| Style | Standing and Wall Hanging |
| Is Smart Device | No |
| Use | Household |
| High-concerned chemical | None |
Compact size for easy placement.
10. User Tips
Maintaining optimal indoor temperature and humidity is crucial for comfort and health. Here are some general guidelines:
Warm Tips for comfortable home environment.
Suitable Parameters for Home Space:
- Comfortable Humidity: Aim for approximately 58% relative humidity. Generally, 45-65% is comfortable.
- Comfortable Temperature: Aim for approximately 22°C (71.6°F).
Health Tips About Temperature and Humidity:
- Anti-mites/mold: Control indoor humidity below 65%, especially with a temperature around 20°C (68°F). Humidity above 70% creates a breeding ground for mites and mold.
- Prevent flu: The influenza virus loses infectivity in environments with humidity above 55%. Conversely, low humidity (below 40%) can increase the risk of infection.
- Prevent asthma: Dry air can exacerbate asthma symptoms. It is recommended to maintain humidity above 50% to help prevent asthma attacks.
11. Warranty and Support
This product is covered by a standard manufacturer's warranty. For specific warranty details or technical support, please refer to the official product documentation or contact the seller directly. Keep your purchase receipt as proof of purchase.
