1. Product Overview
The PAGANI DESIGN PD 1775 is a sophisticated men's quartz chronograph watch, combining elegant design with robust functionality. It features a precise Japan TMI VK64 quartz movement, a durable stainless steel case and bracelet, and a scratch-resistant sapphire crystal. With 100 meters (330 feet) of water resistance, it is suitable for various activities, including swimming and snorkeling.
2. Specifications
| Feature | Detail |
|---|---|
| Model Number | PD 1775 |
| Movement | Quartz (Japan TMI VK64) |
| Case Material | Stainless Steel |
| Case Thickness | 13mm (0.51in) |
| Dial Diameter | 37.5mm (1.48in) |
| Dial Window Material | Sapphire Crystal |
| Band Material | Stainless Steel |
| Band Width | 20mm (0.79in) |
| Band Length | 18cm |
| Clasp Type | Bracelet Clasp |
| Water Resistance Depth | 10Bar (100M / 330ft) |
| Features | Chronograph, Complete Calendar, Water-Resistance, Luminous hands/markers |
| Weight | 120g (0.26lb) |
| Max Perimeter | 180mm (7.09in) |
| Box Material | Paper |
| Battery | Included |
3. Setup and Initial Use
3.1 Setting the Time and Date
- Pull out the crown: Gently pull the crown (the knob on the side of the watch) to position 2 for date adjustment, or position 3 for time adjustment.
- Adjust the date: In position 2, turn the crown clockwise or counter-clockwise to set the correct date. Avoid adjusting the date between 9 PM and 3 AM, as this can damage the movement.
- Adjust the time: In position 3, turn the crown to move the hour and minute hands to the correct time. Ensure you account for AM/PM if the watch has a 24-hour sub-dial.
- Push in the crown: Once set, push the crown back into position 1 (normal operating position) to start the watch.
3.2 Adjusting the Bracelet
The stainless steel bracelet can be adjusted by removing or adding links. This procedure typically requires specialized tools and should ideally be performed by a professional watchmaker or jeweler to prevent damage to the bracelet or clasp.
4. Operating the Chronograph
The PD 1775 features a chronograph function for measuring elapsed time. It typically has two pushers located above and below the crown.
- Start: Press the top pusher to start the chronograph. The chronograph second hand will begin to move.
- Stop: Press the top pusher again to stop the chronograph. The elapsed time will be indicated by the chronograph hands.
- Reset: Press the bottom pusher to reset the chronograph hands to their zero positions. Ensure the chronograph is stopped before resetting.
5. Maintenance and Care
5.1 Cleaning
- Wipe the watch regularly with a soft, dry cloth to remove dust and fingerprints.
- For stainless steel parts, a slightly damp cloth can be used, followed by immediate drying.
- Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish and seals.
5.2 Water Resistance
The watch is water-resistant to 100 meters (10 ATM / 330 feet). This means it is suitable for swimming, snorkeling, and showering. However, it is crucial to:
- Ensure the crown is fully pushed in before any contact with water.
- Do not operate the crown or pushers while the watch is wet or submerged.
- Avoid exposing the watch to hot water, steam, or extreme temperature changes, as this can compromise the water-resistant seals.
5.3 Battery Replacement
As a quartz watch, it is powered by a battery. When the battery runs low, the watch may stop or the second hand might skip seconds. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and prevent damage to the movement.
5.4 Storage
When not in use, store the watch in a cool, dry place, away from direct sunlight, extreme temperatures, and strong magnetic fields.
6. Troubleshooting
- Watch not running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
- Inaccurate time: Ensure the time is set correctly. If the watch consistently runs fast or slow, it may require servicing.
- Chronograph not resetting to zero: If the chronograph hands do not reset to their zero positions, consult a professional watch technician for adjustment.
- Condensation under crystal: If condensation appears under the crystal, it indicates a breach in the water resistance. Immediately take the watch to a professional for inspection and repair to prevent internal damage.
7. User Tips
- For optimal longevity of the water resistance seals, it is recommended to have your watch's water resistance checked annually by a professional.
- When adjusting the time, it's often best practice to set the minute hand a few minutes past the desired time and then turn it backward to the exact minute. This helps to remove any slack in the gear train.
- If you frequently use the chronograph, remember to reset it after each use to conserve battery life and prevent unnecessary wear on the mechanism.
8. Warranty and Support
Your PAGANI DESIGN PD 1775 watch comes with an original gift box, a user manual, and a warranty card. Please refer to the warranty card for specific terms and conditions regarding coverage and duration.
For any technical support, service, or warranty claims, please contact the authorized PAGANI DESIGN service center or the retailer from whom you purchased the watch. Keep your proof of purchase and warranty card in a safe place.