QINLIFE Y10

Contents

QINLIFE Y10 Motorcycle Helmet Bluetooth Headset

Model: Y10

1. Product Overview

The QINLIFE Y10 is a wireless Bluetooth headset designed for motorcycle helmets, offering hands-free communication, music playback, and navigation audio. It features Bluetooth 5.3 for stable connectivity, intelligent noise reduction, and a waterproof design for various riding conditions.

QINLIFE Y10 Helmet Bluetooth Headset with key features

Figure 1: Y10 Headset with highlighted features (Bluetooth 5.3, 2000mAh battery, 72h working, 160h standby).

Video 1: Showcase of the Y10 headset's RGB lighting and waterproof capabilities.

2. Package Contents

Ensure all items are present in your package:

  • 1 x Y10 Headset Unit
  • 1 x Clip-on Base
  • 1 x Speaker & Microphone (integrated, available in Soft MIC or Hard MIC variants)
  • 1 x Type-C Charging Cable
  • 1 x User Manual
  • 1 x Velcro Installation Package
Product accessories list for ST1 headset

Figure 2: Diagram showing the included accessories: headset, clip-on base, speakers & microphone, Type-C charging cable, and user manual.

3. Setup and Installation

3.1 Microphone Selection

The Y10 headset comes with different microphone types to suit various helmet designs:

  • Soft Microphone Set: Ideal for full-face helmets and rally helmets.
  • Hard Microphone Set: Recommended for half-face helmets, open-face helmets, and retro helmets.

3.2 Mounting the Headset

The headset features a split mounting design for easy and secure installation on various helmet types.

  1. Attach the clip-on base to the side of your helmet. Ensure it is securely fastened.
  2. Slide the Y10 headset unit onto the clip-on base until it clicks into place.
  3. Connect the speaker and microphone cable to the headset unit's speaker/microphone interface.
  4. Position the speakers inside the helmet's ear pockets and secure them with the provided Velcro pads.
  5. Position the microphone appropriately for clear voice capture, ensuring it is close to your mouth but not obstructing your vision.
Split mounting suitable for all types of helmets

Figure 3: The split mounting design allows for easy installation on various helmet types, including full-face, cross-country, visor, half-helmet, and summer helmets.

Y10 Soft Mic suitable for full helmet with accessories

Figure 4: Example of a Soft Mic setup, suitable for full-face helmets, showing the headset and accessories.

4. Operating Instructions

4.1 Button Functions

The Y10 headset features physical pressure buttons for easy operation, even while wearing gloves. Refer to the diagram below for button identification:

Function Keys Description diagram

Figure 5: Detailed description of the Y10 headset's function keys, including power, volume, AI voice, and indicators.

  • On/Off Key / Play Pause Key / Answer Key: Controls power, music playback, and call management.
  • Volume Down / Previous Song: Decreases volume and skips to the previous track.
  • AI Voice Key: Activates the AI voice assistant.
  • Volume Plus / Next Song: Increases volume and skips to the next track.
  • Working Indicator (Green, Blue): Shows device status.
  • Charging Indicator (Red): Indicates charging status.
  • Speaker/Mic Interface: Connection point for speakers and microphone.
  • Charging Port: Type-C port for charging.

4.2 Power On/Off and Pairing

  1. Power On: Press and hold the On/Off key until the indicator lights up.
  2. Pairing: Once powered on, the headset will enter pairing mode (indicator may flash). On your mobile device, search for "QINLIFE Y10" in Bluetooth settings and connect.
  3. Power Off: Press and hold the On/Off key until the indicator turns off.

4.3 Music and Calls

  • Play/Pause: Short press the On/Off key.
  • Volume Adjustment: Short press the Volume Plus (+) or Volume Down (-) keys.
  • Next/Previous Track: Long press the Volume Plus (+) for next track, or Volume Down (-) for previous track.
  • Answer/End Call: Short press the On/Off key.
  • Reject Call: Long press the On/Off key.

4.4 AI Voice Assistant

The Y10 supports AI voice assistant functions, allowing for hands-free control of your mobile device.

  1. Activate: Press the AI Voice key to wake up your phone's voice assistant (e.g., Siri, Google Assistant).
  2. Commands: Once activated, you can issue voice commands for tasks like playing music, navigating, or making calls.
One Click to Wake Up AI Voice Assistant

Figure 6: Illustration of activating the AI voice assistant with a single button press for hands-free control.

4.5 Smart Connection (Multi-device)

The headset can connect to two mobile phones simultaneously, allowing you to switch between devices for music, navigation, and calls with a single button.

Smart One Drags Two feature

Figure 7: The 'Smart One Drags Two' feature, demonstrating the headset's ability to connect to two mobile phones simultaneously.

5. Maintenance

5.1 Charging

The Y10 headset is equipped with a built-in polymer lithium 3.7V 2000mAh battery. Use the provided Type-C charging cable to charge the device. A full charge takes approximately 2.5 hours.

  • Connect the Type-C cable to the charging port on the headset and to a 5V/1A power source.
  • The red charging indicator will illuminate during charging and turn off when fully charged.

5.2 Waterproofing

The headset has an IPX6 waterproof rating, making it resistant to dust and rain. While it is designed to withstand various weather conditions, avoid submerging the device in water.

IP56 waterproof dustproof feature

Figure 8: The IP56 waterproof and dustproof design ensures the headset functions reliably in rain or shine.

5.3 Cleaning

Wipe the headset with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the charging port cover is properly sealed after charging to maintain waterproofing.

6. Troubleshooting

  • Device not powering on: Ensure the battery is charged. Connect to a power source and try again.
  • Cannot pair with phone: Make sure Bluetooth is enabled on your phone and the headset is in pairing mode. Try restarting both devices.
  • No sound: Check volume levels on both the headset and your phone. Ensure the speaker/microphone cable is securely connected.
  • Poor sound quality/noise: Ensure the microphone is positioned correctly and not obstructed. The headset features CVC+DSP dual noise reduction for clear communication.
  • Automatic call answering: Some users have reported an auto-answer feature. If you wish to disable this, consult the full user manual (if available) or check your phone's Bluetooth settings for options related to call handling with connected devices.

7. Specifications

Product Parameter table for Y10 headset

Figure 9: Detailed product parameters for the Y10 headset.

ParameterValue
Type NumberY10
Product TypeHelmet wireless headset
Weight (Bare machine)60g
Item Weight (Total)180g
Product Size (L*W*H)85*35*51mm (3.35*1.38*2 inches)
Battery CapacityBuilt-in polymer lithium 3.7V 2000mAh
Charging Time≤2.5 hours (approx. 20 minutes for quick charge)
Call Duration30 hours
Playing Time (max volume)Approx. 25 hours
Standby TimeAbout 18 months (160 hours)
Bluetooth VersionBluetooth 5.3
Waterproof LevelIPX6
Transmission Distance20m (without obstructions)
Bluetooth Identification NameQINLIFE Y10
SNR78dB
Frequency Response100Hz~18KHz
USB SpecificationTYPE-C
Special FeaturesVoice control, Waterproof, Noise Reduction
External Testing CertificationCE
CertificationCE, RoHS, FCC

8. User Tips

  • Intercom Functionality: Please note that the QINLIFE Y10 headset does not support helmet-to-helmet intercom communication. It is designed for connecting to your mobile phone for calls, music, and navigation. You can use your phone's calling features to communicate with other riders.
  • Auto-Answer Feature: If your device automatically answers incoming calls and you prefer to disable this, check your mobile phone's Bluetooth settings for the connected device. Some phones offer options to manage call handling preferences for Bluetooth accessories.
  • Sound Quality: For optimal sound quality and noise reduction, ensure the speakers are positioned directly over your ears inside the helmet and the microphone is close to your mouth.

9. Warranty and Support

For warranty information, technical support, or any issues not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.