1. Introduction
This Wofea Wireless Passive Infrared (PIR) Detector is designed for home security alarm systems, offering high stability and advanced signal processing technology. It provides superior detection capabilities and minimizes false alarms. The detector automatically senses human movement within its detection area and transmits an alarm signal to a compatible alarm host. This product is ideal for enhancing the safety of residential houses, villas, factories, markets, warehouses, and office buildings.
2. Main Features
- ASIC Adopted for reliable performance.
- Automatic temperature compensation for consistent detection across varying temperatures.
- Sends alarm signals wirelessly via RF (Radio Frequency).
- No wiring required, ensuring convenient installation.
- Low battery indication to alert users for timely battery replacement.
- SMT (Surface-Mount Technology) design for compact and efficient circuitry.
3. Technical Specifications
| Parameter | Value |
|---|---|
| Operation Voltage | 9V (Battery) |
| Static Current | Less than 25uA |
| Alarm Current | Less than 15mA |
| Detecting Distance | 12 meters |
| Detecting Angle | 110 degrees |
| Code Form | 1527 type |
| Wireless Frequency | 433MHz |
| Wireless Distance | 100 meters (in open area) |
| Low Battery Indicator | Yellow LED |
| Alarm Indicator | Red LED |
| Range of Coverage | 11 distance, 8 middle, 5 vicinities |
| Sensor Type | Dual element infrared sensor |
| Operation Temperature | -10°C to 50°C |
| Environment Humidity | Less than 95% (non-condensing) |
| Anti RF Interference | 10MHz-1GHz, 20V/m |
| Installation Mode | Wall mounted or corner installation |
| Installation Height | 1.7-2.5m (2.2m is recommended) |
| Outline Size (L x W x H) | 59 x 45 x 107 mm |
4. Package Contents
The package typically includes:
- 1x Wofea Wireless PIR Sensor Motion Detector (Model ZC-S002)
- 1x Installation Stent/Bracket
- Screws for mounting
- User Manual (this document)

5. Setup and Installation
5.1 Component Overview

5.2 Battery Installation
The PIR sensor requires one 9V battery for operation. Follow these steps to install the battery:
- Carefully open the back cover of the PIR sensor using a small screwdriver.
- Insert a new 9V battery into the battery compartment, ensuring correct polarity.
- Close the back cover securely.
5.3 Physical Installation
The PIR sensor can be wall-mounted or installed in a corner. Consider the following guidelines for optimal performance:
- Recommended Installation Height: 1.7 to 2.5 meters (2.2 meters is proposed for best coverage).
- Placement: Choose a location where the sensor has an unobstructed view of the area you wish to monitor. Avoid pointing it directly at heat sources, windows, or areas with significant air currents (e.g., near air conditioners or vents) to prevent false alarms.
- Use the provided installation stent and screws to securely mount the sensor.

6. Operating Instructions
6.1 Powering On/Off
Locate the ON/OFF switch on the side of the PIR sensor (refer to Figure 5.1). Slide the switch to 'ON' to activate the sensor and to 'OFF' to deactivate it.

6.2 Pairing with Alarm System
This wireless motion sensor operates at 433MHz and uses the 1527 type code form. It is designed to work with compatible home security alarm systems. The pairing process typically involves:
- Put your alarm host into 'learning' or 'pairing' mode (refer to your alarm host's manual for specific instructions).
- Trigger the PIR sensor by moving in front of it. The sensor will transmit a signal.
- The alarm host should acknowledge the signal, indicating successful pairing.
- Test the sensor by arming your alarm system and walking into the detection area. The alarm should trigger.

7. Maintenance
7.1 Cleaning
To ensure optimal performance, periodically clean the detection window of the PIR sensor with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the sensor's components.
7.2 Battery Replacement
When the yellow LED low battery indicator illuminates, it's time to replace the 9V battery. Follow the battery installation steps outlined in Section 5.2. Always use a fresh, high-quality 9V battery for reliable operation.
8. Troubleshooting
- Sensor not detecting motion:
- Check if the sensor is powered on (switch to 'ON').
- Replace the 9V battery if the low battery indicator is on or if the sensor is unresponsive.
- Ensure the detection window is clean and free from obstructions.
- Verify the installation height and angle are appropriate for the area.
- False alarms:
- Relocate the sensor away from direct heat sources (heaters, direct sunlight), windows, or areas with strong air currents.
- Ensure there are no pets or objects that could trigger the sensor within its detection zone.
- Sensor not communicating with alarm host:
- Re-attempt the pairing process as described in Section 6.2.
- Ensure the alarm host is compatible with 433MHz, 1527 type sensors.
- Check the distance between the sensor and the alarm host; ensure it's within the 100m (open area) wireless range and minimize obstacles.
9. User Tips
No specific user tips were available from the provided reviews or Q&A content. However, general best practices for PIR sensors include:
- Regularly test your alarm system and all connected sensors to ensure they are functioning correctly.
- Keep the sensor's detection area clear of clutter or moving objects that could cause false alarms.
- Consider the environment when installing; extreme temperatures or humidity can affect sensor performance.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.