1. Introduction
Thank you for choosing the Dongcheng DCPL04 Cordless Brushless Impact Screwdriver. This powerful and versatile tool is designed for efficient fastening and drilling tasks, featuring a robust brushless motor, adjustable torque modes, and a compact design. Please read this manual carefully before operating the tool to ensure safe and effective use. Keep this manual for future reference.

Figure 1: Dongcheng DCPL04 Cordless Impact Screwdriver
2. Safety Instructions
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools.
- Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Electrical Safety: Power tool plugs must match the outlet. Never modify the plug in any way. Do not expose power tools to rain or wet conditions.
- Personal Safety: Always wear eye protection. Use hearing protection when operating for extended periods. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source and/or remove the battery pack before making any adjustments, changing accessories, or storing power tools.
- Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs.
3. Package Contents
The standard package for the DCPL04 includes:
- 1 x Dongcheng DCPL04 Cordless Brushless Impact Screwdriver (Bare Tool)
Note: Battery and charger are sold separately and are not included with the bare tool.

Figure 2: DCPL04-9 Bare Tool (Battery and Charger Not Included)
4. Specifications

Figure 3: Product Parameter Table
| Parameter | Value |
|---|---|
| Model | DCPL04 |
| Rated Voltage | 12V DC |
| Charger Voltage | 12V / 220V-240V AC (for charger, not tool) |
| Chuck Size | 1/4 inch (6.35mm) |
| Maximum Torque | 140Nm |
| No-Load Speed | 0-1200 rpm (Low) / 0-3300 rpm (High) |
| Impact Rate | 0-1600 bpm (Low) / 0-4000 bpm (High) |
| Max Work Capacity | M5-M14 (Standard) |
| Weight | 0.9 Kg (bare tool) |
| Motor Type | Brushless |
| Certification | CE |
| Power Source | DC |

Figure 4: Internal view of the brushless motor for enhanced efficiency and durability.

Figure 5: Visual representation of the tool's maximum 140Nm torque output.
5. Setup
5.1 Battery Installation
- Ensure the tool is switched off.
- Align the battery pack with the receptacle on the bottom of the tool handle.
- Slide the battery pack into the handle until it clicks securely into place.
- To remove, press the battery release button and slide the battery pack out.
5.2 Bit Installation
- Ensure the tool is switched off and the battery is removed.
- Pull the chuck collar forward to open the chuck.
- Insert the 1/4 inch hex shank bit fully into the chuck.
- Release the chuck collar to lock the bit in place. Tug on the bit to ensure it is securely fastened.
6. Operating Instructions
6.1 Powering On/Off and Speed Control
- To start the tool, press the trigger switch.
- To stop the tool, release the trigger switch.
- The tool features a variable speed trigger. Pressing the trigger further increases the speed.
- A built-in LED work light illuminates the work area when the trigger is pressed.
- The battery indicator lights on the tool provide an approximate charge level of the installed battery.
6.2 Work Modes
The DCPL04 offers three adjustable torque modes for various applications, selected via a mode switch on the tool body:

Figure 6: Illustration of the 3-Torque Adjustable Modes
- A Mode: Designed for screw-in tasks at low speed with high-speed impact. Ideal for controlled fastening where initial speed is critical.
- H Mode: High-speed mode suitable for fastening carpentry screws and general applications requiring higher torque and speed.
- L Mode: Low-speed mode specifically recommended for fastening M6 screws, providing precise control and preventing overtightening or damage.
6.3 General Usage
Hold the tool firmly with both hands if necessary, especially for high-torque applications. Apply steady pressure to the workpiece. Ensure the bit is properly seated in the screw head to prevent cam-out. For drilling, use appropriate hex-shank drill bits.
Video 1: Demonstration of the Dongcheng DCPL04 impact screwdriver in various fastening and drilling applications, including an animation of its internal power system.

Figure 7: User operating the impact screwdriver to drive a screw into a wooden beam.
7. Maintenance
7.1 Cleaning
- Keep the tool's ventilation openings clean to prevent overheating.
- Use a soft, damp cloth to clean the exterior of the tool. Do not use harsh chemicals or abrasive cleaners.
- Regularly remove dust and debris from the chuck area.
7.2 Storage
- Store the tool in a dry, secure place out of reach of children.
- Remove the battery pack from the tool when storing for extended periods.
7.3 Battery Care (for separately purchased batteries)
- Charge batteries fully before first use.
- Do not store batteries in discharged condition.
- Avoid exposing batteries to extreme temperatures.
8. Troubleshooting
- Tool not starting: Ensure the battery is fully charged and properly installed. Check if the trigger lock is engaged.
- Reduced power or intermittent operation: The battery may be low on charge. Recharge the battery. Check for loose connections or damaged bits.
- Overheating: Allow the tool to cool down. Ensure ventilation slots are clear of debris. Avoid continuous heavy-duty use without breaks.
9. User Tips
- Choose the Right Mode: Utilize the A, H, and L modes effectively for different tasks. 'L' mode is excellent for delicate work or when precise control is needed to avoid stripping screws.
- Bit Selection: Always use impact-rated bits for impact driving to prevent breakage and ensure optimal performance. Match the bit type (Phillips, Torx, etc.) to the screw head.
- Pilot Holes: For larger screws or harder materials, pre-drilling pilot holes can make fastening easier and prevent wood splitting.
- Battery Management: Keep spare batteries charged for uninterrupted work, especially on larger projects.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.