EDON TB 200/250/300/400

Contents

EDON TB Series Inverter Welding Machine User Manual

Models: TB-200, TB-250, TB-300, TB-400

1. Introduction

This manual provides essential information for the safe and efficient operation of your EDON TB series inverter welding machine. Please read it thoroughly before use to ensure proper handling, maximize performance, and prevent injury or damage. The EDON TB series welders are designed for various applications, including home DIY, aloft operations, field operations, and indoor-outdoor decorations.

2. Safety Instructions

WARNING: Welding can be dangerous. Always follow safety precautions to prevent serious injury or death.

  • Electric Shock: Can kill. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Insulate yourself from work and ground.
  • Fumes and Gases: Can be hazardous to your health. Keep your head out of the fumes. Use enough ventilation or exhaust at the arc to keep fumes and gases away from the breathing zone.
  • Arc Rays: Can burn eyes and skin. Wear a welding helmet with a proper shade of filter to protect your face and eyes when welding or watching. Wear safety glasses with side shields. Wear body protection.
  • Fire and Explosion: Welding sparks can cause fire or explosion. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
  • Burns: Hot metal can cause severe burns. Do not touch hot parts with bare hands. Allow the welding machine and workpiece to cool before handling.
  • Ensure the machine is properly grounded.
  • Do not operate the machine in damp or wet conditions.
  • Keep children and unauthorized personnel away from the welding area.

3. Package Contents

Upon unpacking, please verify that all items listed below are present and undamaged:

  • EDON TB Series Inverter Welding Machine (TB-200/250/300/400)
  • Earth Clamp
  • Electric Holder
  • Welding Mask
  • Wire Brush
EDON TB-300/TB-400 Welding Machine with included accessories: earth clamp, electrode holder, welding mask, and wire brush.
Figure 1: EDON TB-300/TB-400 Welding Machine and Accessories

4. Product Overview

The EDON TB series inverter welding machines utilize advanced IGBT inverter technology, providing high efficiency and energy-saving performance. They feature DC output and include O.C. (Over Current) and O.H. (Over Heat) protection for long-term, reliable use. These machines are portable and lightweight, making them easy to carry and suitable for various welding tasks.

Front view of the EDON TB-300 welding machine, showing the digital display, 'ARC FORCE' and 'CURRENT' adjustment knobs, and electrode connection ports.
Figure 2: Front Panel of EDON TB-300 Welding Machine
Diagram highlighting key features of the EDON welding machine: Advanced IGBT inverter technology, DC output, high efficiency, energy-saving, O.C. & O.H. protection, portable and lightweight design, suitable for DIY and professional use.
Figure 3: Key Features of EDON TB Series Welders
Internal components of the EDON welding machine, illustrating IGBT/MOSFET tube, high quality radiator, intelligent fan, durable capacitor, SMT control board, PC circuit board, amorphous structure transformer, and energy saving & high efficiency.
Figure 4: Internal Advantages and Components

5. Setup Instructions

  1. Unpacking: Carefully remove the welding machine and all accessories from the packaging. Inspect for any shipping damage.
  2. Placement: Place the welding machine on a stable, level surface. Ensure adequate ventilation around the machine to prevent overheating. Do not block air vents.
  3. Power Connection: Connect the machine to a 1PH AC 220V±15%, 50/60Hz power supply. Ensure the power outlet is properly grounded and can handle the machine's input current (refer to specifications for your model).
  4. Earth Clamp Connection: Connect the earth clamp cable to the negative (-) terminal on the front panel of the welding machine. Securely attach the earth clamp to the workpiece or welding table, ensuring good electrical contact.
  5. Electrode Holder Connection: Connect the electrode holder cable to the positive (+) terminal on the front panel. Insert the welding electrode into the electrode holder.
  6. Personal Protective Equipment (PPE): Before powering on, ensure you are wearing all necessary PPE, including a welding helmet, welding gloves, and protective clothing.

6. Operating Instructions

  1. Power On: Turn on the main power switch located on the machine. The digital display will illuminate, showing the current setting.
  2. Adjust Current: Use the 'CURRENT' adjustment knob on the front panel to set the desired welding current (Amperes). Refer to the electrode manufacturer's recommendations for appropriate current settings.
  3. Adjust Arc Force (if applicable): Use the 'ARC FORCE' knob to adjust the arc stability and penetration. Higher arc force can help prevent the electrode from sticking.
  4. Start Welding: Bring the electrode into contact with the workpiece to strike an arc. Maintain a consistent arc length and travel speed for optimal weld quality.
  5. Monitor Performance: Pay attention to the digital display and any indicator lights (e.g., O.H. indicator for overheating, O.C. indicator for overcurrent). If an indicator lights up, stop welding and allow the machine to cool or check for issues.
  6. Power Off: After completing your welding task, turn off the main power switch. Allow the machine to cool down before disconnecting cables or storing.
A person wearing a welding helmet and gloves, actively welding a metal piece, illustrating the use of the welding machine.
Figure 5: Welding in Progress

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
  • Cable Inspection: Regularly inspect all cables (power, earth clamp, electrode holder) for cuts, fraying, or damage. Replace damaged cables immediately.
  • Connection Check: Ensure all electrical connections are tight and secure. Loose connections can cause overheating and poor performance.
  • Storage: Store the welding machine in a clean, dry environment, away from moisture and corrosive substances.

8. Troubleshooting

If you encounter issues with your EDON TB series welding machine, refer to the following common problems and solutions:

  • Machine does not power on:
    • Check if the power cord is securely plugged into both the machine and the power outlet.
    • Verify that the power outlet is functional and receiving power.
    • Check the main power switch on the machine.
  • No arc or weak arc:
    • Ensure the earth clamp has good electrical contact with the workpiece. Clean any rust, paint, or debris from the contact point.
    • Check if the electrode is properly inserted into the electrode holder and is not worn out.
    • Verify that the welding current setting is appropriate for the electrode size and material.
    • Ensure the workpiece material is conductive.
  • Overheat (O.H.) indicator lights up:
    • The machine has exceeded its duty cycle or is operating in a high-temperature environment. Stop welding and allow the machine to cool down.
    • Ensure ventilation openings are not blocked and the cooling fan is operating.
    • Reduce the welding current or welding duration.
  • Poor weld quality (e.g., porosity, lack of penetration):
    • Adjust the welding current and arc force settings.
    • Ensure the workpiece is clean and free of contaminants.
    • Check the electrode type and size for suitability with the material.
    • Maintain a consistent arc length and travel speed.

9. Specifications

The following table details the technical specifications for the EDON TB series inverter welding machines:

ITEMTB-200TB-250TB-300TB-400
Input Voltage(V)1PH AC 220V±15%, 50/60Hz
Input Current(A)17.621.826.231
Input Power Capacity(KVA)3.8KVA4.7KVA5.8KVA6.8KVA
No-load Voltage(V)65±565±560±560±5
Output Current(MMA)20-10020-12020-14020-160
Rated Duty Cycle(%) @40℃60
Efficiency(%)85
Power Factor0.73
Electrode(mm)1.0-2.51.0-3.21.0-3.21.0-4.0
Insulation ClassF
Machine Size (mm)245x105x115300x125x190

Additional Specifications:

  • Rated Output Voltage: 26.4 V
  • Motor Type: DC MOTOR
  • Machinery Test Report: Provided
  • Video Outgoing-Inspection: Provided

10. User Tips

  • Practice Makes Perfect: If you are new to welding, practice on scrap metal to get a feel for the machine and find the optimal current and arc force settings for different materials and electrodes.
  • Cleanliness is Key: Always ensure your workpiece is clean and free of rust, paint, oil, or other contaminants. A clean surface leads to stronger, higher-quality welds.
  • Electrode Selection: Use the correct type and size of electrode for the material you are welding. Refer to electrode manufacturer guidelines.
  • Ventilation: Even with good ventilation, consider using a respirator, especially when welding in enclosed spaces.

11. Warranty and Support

Your EDON TB series inverter welding machine comes with a 1-Year Warranty.

For technical support, service, or any inquiries, please contact our support team:

  • WhatsApp: +86 13107345542
  • After-sales Service Provided: Engineers available to service machinery overseas.
  • After Warranty Service: Video technical support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.