staniot SecPanel 7 H700-4G

Contents

Staniot SecPanel 7 H700-4G Home Security Alarm System

User Manual

Brand: Staniot

1. Introduction

The Staniot SecPanel 7 H700-4G is an advanced home security system designed to provide comprehensive protection for your property. Featuring a 7-inch IPS full-color touchscreen, WiFi and 4G connectivity, and smart app control, this system integrates seamlessly with various sensors and smart home platforms like Tuya, Amazon Alexa, and Google Assistant. This manual provides detailed instructions for setting up, operating, and maintaining your security system.

2. Safety Information

  • Read all instructions carefully before operating the device.
  • Do not expose the device to extreme temperatures or humidity.
  • Ensure proper power supply (Type-C 5V 2A or DC12V 1A) to prevent damage.
  • Keep out of reach of children.
  • Only use accessories and power adapters approved by Staniot.

3. Package Contents

Please check the package for the following items:

  • Staniot SecPanel 7 H700-4G Main Control Panel (x1)
  • Door/Window Sensor (x1)
  • Motion Detector (x1)
  • Remote Controller (x2)
  • Power Adapter (x1)
  • Mounting Accessories (screws, brackets)
  • User Manual (this document)

Note: Specific accessory quantities may vary based on the kit purchased (e.g., Set-A 7kit, Set-B 9kit, Set-D 13kit).

4. Product Overview

The Staniot SecPanel 7 H700-4G features a sleek design with a 7-inch IPS full-color display for intuitive control. The back panel includes essential ports and switches for connectivity and power.

Main Panel Components

Back panel diagram of the Staniot SecPanel 7 H700-4G showing DC12V 1A, Type-C 5V 2A ports, Speaker, Anti-disassembly Switch, Siren, Battery Switch, 8 Wired Zones, Nano SIM Card Slot, and Desktop Bracket.

Figure 1: Back Panel Layout

  • DC12V 1A Port: External power input.
  • Type-C 5V 2A Port: USB power input.
  • Speaker: For audio alerts and voice prompts.
  • Anti-disassembly Switch: Triggers an alarm if the panel is tampered with.
  • Siren: Built-in 115dB siren for alarm events.
  • Battery Switch: To enable/disable the internal battery.
  • 8 Wired Zones: For connecting wired sensors.
  • Nano SIM Card Slot: For 4G cellular communication.
  • Desktop Bracket: For tabletop placement.

5. Setup Guide

5.1 Initial Power-up and SIM Card Installation

  1. Gently open the back cover of the main panel.
  2. Insert a Nano SIM card into the designated slot. Ensure the SIM card is correctly oriented.
  3. Locate the Battery Switch and ensure it is in the 'ON' position.
  4. Connect the power adapter to either the Type-C 5V 2A or DC12V 1A port. (Note: Do not connect both simultaneously).
  5. The system will boot up and display a 'Welcome' screen.

Watch this video for a visual guide on SIM card installation and initial power-up:

Video 1: Main Panel Setup and SIM Card Installation

5.2 App Installation and WiFi Configuration

  1. On the main panel's 'Welcome' screen, tap 'Start'.
  2. Select your preferred language.
  3. Proceed to the 'Download APP' screen. Scan the provided QR code for iOS or Android to download the 'Smart Life' or 'Tuya Smart' app on your smartphone.
  4. Open the app and create an account or log in.
  5. In the app, select 'Add Device'. The app will search for nearby devices.
  6. On the main panel, tap 'WiFi' and then 'Airlink'. Confirm to reset WiFi settings if prompted.
  7. Follow the instructions in the app to connect the security panel to your 2.4GHz WiFi network. Ensure your phone's Bluetooth is enabled during this process.

5.3 Adding Accessories (Sensors and Controllers)

The system supports up to 150 accessories. To add new accessories:

  1. On the main panel, navigate to the 'Add accessories' section.
  2. To add a sensor (e.g., Door/Window Sensor):
    • Tap 'Add a sensor', then select 'Entry Sensor'.
    • Choose the desired mode (Away/Home/Always) and configure 'Alarm delay', 'Entry open chime', and 'Entry opened warning' as needed.
    • Tap 'Pair'. The panel will prompt you to trigger the accessory.
    • Trigger the sensor (e.g., separate the two parts of a door sensor) until the panel confirms 'Pair ok'.
  3. To add a controller (e.g., Remote Control):
    • Tap 'Add a controller'.
    • Tap 'Pair'. The panel will prompt you to trigger the accessory.
    • Press any button on the remote control until the panel confirms 'Pair ok'.

6. Operating Instructions

6.1 Arming and Disarming

You can arm or disarm the system using the touchscreen panel or the remote control.

  • Away Mode: Full arming. All connected sensors are active. Ideal when no one is home.
  • Home Mode: Partial arming. Typically, perimeter sensors (e.g., door/window sensors) are active, while internal motion sensors may be inactive. Ideal when people are inside.
  • Disarm Mode: The system is off, and no alarms will be triggered by sensors.
Staniot SecPanel 7 H700-4G showing 'Arm is counting down' with a 45-second timer, indicating the system is transitioning to an armed state.

Figure 2: Arming Countdown

6.2 SOS Function

In case of an emergency, you can manually trigger an alarm:

  • Press the 'SOS' button on the main panel's touchscreen.
  • Alternatively, press the dedicated SOS button on your remote control.

The system will immediately activate the built-in siren and send alerts to your preset emergency phone numbers.

6.3 APP Remote Control

Manage your security system from anywhere using the 'Smart Life' or 'Tuya Smart' app:

  • Remotely arm or disarm the system.
  • View the real-time status of all connected door and window sensors.
  • Customize the names of individual accessories for easier identification.
Staniot SecPanel 7 H700-4G next to a smartphone displaying the Smart Security Panel app, showing remote control capabilities.

Figure 3: APP Remote Control Interface

6.4 Voice Control (Alexa & Google Assistant)

Integrate your Staniot security system with Amazon Alexa or Google Assistant for convenient voice control:

  1. Enable the 'Smart Life' or 'Tuya Smart' skill/service in your Alexa or Google Home app.
  2. Link your Tuya account with your voice assistant account.
  3. You can now use voice commands such as:
    • 'Alexa, please arm the security system.'
    • 'Hey Google, disarm the security system.' (Note: A PIN code, preset in the Alexa/Google app, is required for disarming via voice for security reasons).
A woman interacting with an Amazon Echo device, with speech bubbles indicating 'Alexa, Please arm the security system.' and 'System armed!', along with 'works with Alexa' and 'works with the Google Assistant' logos.

Figure 4: Voice Control Integration

6.5 Alarm Phone Numbers

The system can notify up to 5 emergency contacts during an alarm event:

  1. Access the system settings on the main panel or through the app to configure up to five phone numbers.
  2. When an alarm is triggered, the security panel will automatically send text messages to these five phone numbers.
  3. Concurrently, it will call these phone numbers one by one until answered.
Diagram showing the alarm panel triggering an alarm, sending notifications to a smartphone with '5 groups alarm phone number' and '5 groups of SMS alerts'.

Figure 5: Alarm Notification Flow

6.6 Language Settings

The Staniot SecPanel 7 H700-4G supports multiple languages:

  • Supported languages include: English, Nederlands, Spanish, Russian, French, Polish, German, Italian, Portuguese, and Chinese.
  • To change the display language, navigate to the system settings on the main panel and select your preferred language.
World map with various languages highlighted, indicating the 10 languages supported by the system.

Figure 6: Multi-language Support

7. Maintenance

7.1 Battery Management

The main panel is equipped with a built-in 5000mAh lithium battery, providing approximately 32 hours of standby time. To ensure continuous operation:

  • Regularly charge the device using the provided Type-C 5V 2A or DC12V 1A power adapter.
  • The system will provide a low battery alarm when charging is required.
Staniot SecPanel 7 H700-4G displaying 'Longer Battery Life 5000mAh'.

Figure 7: Extended Battery Life

7.2 OTA Online Upgrade

The system supports Over-The-Air (OTA) online upgrades to ensure optimal performance and access to the latest features:

  • Ensure your device is connected to the internet (WiFi or 4G) to receive timely updates.
  • The system will notify you when an update is available. Follow the on-screen prompts to initiate the upgrade.
  • No extra fees or contracts are required for these updates.
Staniot SecPanel 7 H700-4G showing 'Sys update' screen and a smartphone displaying 'New device firmware found' with an 'Update Now' button.

Figure 8: OTA Online Upgrade Process

7.3 Cleaning

To maintain the appearance and functionality of your security system:

  • Wipe the screen and device exterior with a soft, dry, lint-free cloth.
  • Avoid using abrasive cleaners, solvents, or aerosol sprays, as these can damage the device.

8. Troubleshooting

  • System not powering on: Check the power connection, ensure the battery switch on the back panel is in the 'ON' position, and verify the battery charge level.
  • Cannot connect to WiFi: During the Airlink setup, ensure your phone's Bluetooth is enabled and that your WiFi network is 2.4GHz (5GHz networks are not supported). Confirm the WiFi password is correct.
  • Sensor not pairing: Make sure the sensor is triggered promptly after initiating the 'Pair' function on the panel. Check the sensor's battery.
  • Alarm not triggering: Verify that sensors are correctly paired and the system is armed in the appropriate mode (Away or Home). Check the configured alarm phone numbers.
  • Voice control not working: Confirm that the Alexa/Google Assistant integration is correctly set up in the respective app and that your Tuya account is linked. Remember that a PIN code is required for disarming via voice.

9. Specifications

FeatureDescription
Model NumberSecPanel 7 H700-4G
Brand Namestaniot
OriginMainland China
CertificationCE, RoHS
Size183mm x 135mm x 18mm
Display7-inch IPS full-color display (1024x600px resolution)
Power InputType-C 5V 2A or DC12V 1A
Built-in Battery3.7V 5000mAh Lithium battery (approx. 32 hrs standby)
Working Power Consumption<5W
Working Temperature-10°C ~ +50°C
Relative Humidity<95% (no condensation)
Communication InterfaceWireless (WiFi, 4G)
WiFi StandardIEEE802.11b/g/n 2.4G band
Mobile System4G
Wireless Parameters433MHz, eV1527
Zone Number150 (accessories supported)
Wired Zones8
Arming TypeAPP
Video InterfaceYes
Password KeyboardYes
Alarm TypeThe Alarm, SMS, PSTN, GPRS, Apps Control
Smart Home PlatformTuya
FeaturesBuilt-in Louder siren, Low battery alarm, Support anti-dismantling alarm

Note: Specifications are subject to change without prior notice.

10. User Tips

  • For optimal performance, ensure your WiFi network is 2.4GHz as the system does not support 5GHz.
  • When pairing new sensors, make sure to trigger them promptly after initiating the 'Pair' function on the panel.
  • If using voice control for disarming, remember the PIN code set in the Alexa/Google app.

11. Warranty and Support

For technical assistance, warranty claims, or any product-related inquiries, please contact Staniot customer support at support@staniot.com.

Please refer to the official Staniot website for the latest user manuals, FAQs, and product information.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.