Usongshine MKS Tinybee

Contents

Makerbase MKS TinyBee 3D Printer Control Board User Manual

Model: MKS TinyBee

1. Introduction

The Makerbase MKS TinyBee is a state-of-the-art 3D printer main control board featuring an integrated ESP32 MCU with onboard WiFi. This board is designed to offer enhanced control and flexibility for your 3D printing projects. It supports Marlin2.0 firmware and is compatible with various display options, including traditional LCD2004 and 12864 screens, as well as MKS MINI12864 V3 and MKS TFT serial screens. Firmware updates can be performed conveniently via USB, and the 3D printer can be controlled remotely through its WiFi function, connecting to a network and web interface.

2. Key Features

  • Built-in ESP32-WROOM-32U module with Xtensa® dual-core 32-bit LX6 microprocessor, supporting clock frequency up to 240 MHz.
  • Integrated WiFi and Bluetooth module for powerful performance.
  • Built-in 8MB Flash memory chip and 520KB RAM for effective protection and application scenarios.
  • Supports Marlin 2.0.x firmware, upgradable via USB.
  • Compatible with traditional LCD2004/12864, MKS MINI12864 V3, and MKS TFT serial screens (USART2 reserved for MKS TFT series).
  • DIP switches for intuitive and convenient microstep settings, eliminating complex jumper cap operations.
  • Equipped with TVS power supply anti-reverse and spike protection chips to prevent damage from incorrect wiring.
  • Designed with a protection circuit for back electromotive force generated by stepper motors, reducing damage to motor drivers.
  • MOS drive circuit, endstop input, and temperature measurement circuits are protected by Schottky diodes against external spikes.
  • PCB adopts immersion gold process for good oxidation resistance, longer service life, and beautiful appearance.
  • Supports advanced printing features like print from breakpoint, print from power outage, filament outage detection, and auto-off functions.
  • Web control functionality via WiFi for remote printer management.

3. Package Contents

Depending on the selected package, your MKS TinyBee kit may include:

  • MKS TinyBee Control Board
  • MKS MINI12864 V3 Screen (Green or Gold)
  • MKS TFT35 Screen
  • Stepper Drivers (A4988 or TMC2209, typically 5 pieces)

Please refer to your specific package details for an exact list of included items.

4. Product Specifications

ParameterValue
MCUESP32-WROOM-32U
MCU Freq240MHz
Flash8192KBytes
RAM520KBytes
Power inputDc12~24V <20A
Heaters2 heater end+ 1 Heater BED
Temp ADC3 NTC100K: TH1, TB, TH2 (Need jumper selection)
PWM Fans2 Channel
Motor interface5 axis 6 motor interface (Dual Z axis in parallel)
Stepper driver modeSTEP/DIR mode
Driver signalSupport external for high current drivers
Microstep settingsDIP switch
LCD interfaceSupport LCD2004/12864, MKS MINI12864 V3
Serial portReserved USART2 for MKS TFT series screen
EndstopX, Y, Z, MT_DET
3D TOUCHSupport
Power protectSupport power reverse connection protection and power spike protection
Motor back electromotive forceCan be absorbed by the resistance of the phase sequence, and protect the stepper drive
FirmwareMarlin 2.0.x
Firmware update methodUSB upload

5. Setup and Installation

5.1. Wiring Overview

Carefully connect all components to the MKS TinyBee board. Refer to the diagram below for proper connections.

MKS TinyBee Wiring Diagram

Image: MKS TinyBee Wiring Diagram showing USB, SD Card, SD Extender, Aux-1, Resume Breakpoint, Filament Detection, MKS PWC (Auto Off), Power Off Detection, and Wifi Module connections.

5.2. Pinout Diagram

For detailed pin assignments, consult the pinout diagram:

MKS TinyBee Pinout Diagram

Image: MKS TinyBee Pinout Diagram.

5.3. Power Supply Connection

Ensure the power supply is connected with correct polarity. The MKS TinyBee board is equipped with TVS power supply anti-reverse and spike protection chips to prevent damage from incorrect wiring. If the board does not power on, double-check the positive and negative connections of your power supply.

Video: Demonstration of power supply connection, including a scenario with reversed polarity and the board's protection mechanism.

5.4. Microstep Settings

The MKS TinyBee uses convenient DIP switches to set the microstep subdivision for stepper drivers. This eliminates the need for complex jumper cap configurations.

MKS TinyBee DIP Switch Microstep Settings

Image: MKS TinyBee DIP switches for microstep settings.

5.5. Screen Connection

The board supports various screens. For MKS TFT series screens, use the reserved USART2 serial port.

MKS TinyBee Screen Connection Ports

Image: MKS TinyBee board highlighting support for LCD2004/12864, MKS MINI12864 V3, and the reserved USART2 for MKS TFT series screens.

6. Operating Instructions

6.1. Firmware Update

The MKS TinyBee supports Marlin 2.0.x firmware. Firmware updates are performed via USB upload. Refer to the official Makerbase GitHub repository for the latest firmware and detailed update instructions.

6.2. Web Control

The integrated WiFi module allows for web-based control of your 3D printer. Follow these steps:

  1. Connect your PC to the WiFi network broadcast by the MKS TinyBee board.
  2. Open a web browser. The browser should automatically pop up a configuration page.
  3. Upload the necessary web control files (e.g., 'index.html.gz') to the board.
  4. Once the upload is successful, click the "Go to ESP3D interface" button to connect to the printer's web interface.
  5. From the web interface, you can control printer movements, monitor temperatures, and manage other settings.

Video: Demonstration of connecting to the MKS TinyBee's WiFi, uploading web control files, and controlling the 3D printer via the web interface.

7. Maintenance

  • Keep the board clean and free from dust and debris.
  • Avoid exposing the board to excessive moisture or extreme temperatures.
  • The PCB's immersion gold process provides good oxidation resistance, contributing to a longer service life.

8. Troubleshooting

8.1. Board Not Powering On

If the board does not power on, first check the power supply wiring. The MKS TinyBee has built-in TVS power supply anti-reverse protection. If the positive and negative poles of the power supply are connected incorrectly, the board will not work, but it will not be damaged. Correct the wiring, and the board should function normally.

8.2. Motor Issues

The board includes a protection circuit for the back electromotive force generated by stepper motors. This greatly reduces potential damage to the motor driver. If you experience motor issues, ensure all motor connections are secure and the stepper drivers are correctly configured via the DIP switches.

8.3. External Spikes and Static Electricity

The MKS TinyBee's MOS drive circuit, endstop input, and temperature measurement circuits are protected by Schottky diodes to reduce damage from external spikes. The board has also passed anti-static tests (up to 4kV static electricity), ensuring robust operation in various environments.

9. User Tips

  • Language Settings: The MKS TFT35 screen supports multiple languages, including German. Check the screen's settings for language options.
  • External Control: For manual axis control, the board supports external buttons. Refer to the pinout diagram and firmware documentation for configuring these inputs.
  • Compatibility: While the MKS TinyBee is a versatile control board, compatibility with specific third-party boards like Bigtreetech SKR mini e3 may require custom firmware configurations or adapters. Always verify compatibility with your specific setup.

10. Warranty and Support

For warranty information, technical support, and further assistance, please refer to the official Makerbase website or contact your retailer. Ensure you retain your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.