ETAxopowo 2023527

Contents

DP to eDP LCD Driver Board User Manual

Model: 2023527

1. Introduction

This manual provides detailed instructions for the ETAxopowo DP to eDP LCD Driver Board, Model 2023527. This versatile driver board is designed to convert DisplayPort (DP) or Type-C video signals to eDP (Embedded DisplayPort) for use with portable LCD displays. It supports high resolutions up to 8K and refresh rates up to 120Hz, offering a high-quality display solution for various applications.

General view of the DP to eDP LCD Driver Board
Figure 1: General view of the DP to eDP LCD Driver Board.

2. Product Features

  • Input Interfaces: DisplayPort (DP) and Type-C for frontline screen projection.
  • Output Interfaces: eDP 30P and eDP 40P.
  • Resolution Support: Up to 8K (requires Thunderbolt 4 cable and compatible graphics card/display).
  • Refresh Rate: Up to 120Hz.
  • Backlight Adjustment: Adjustable backlight voltage from 5V to 28V.
  • Control: One-click power on and touch-sensitive infinite dimming.
  • Indicator: LED power indicator.

3. Setup Instructions

Follow these steps to set up your DP to eDP LCD Driver Board:

  1. Identify Board Type: Determine if your board is the 30P or 40P version. The eDP 30P uses a reverse line, while the eDP 40P uses a 40P to 40P coaxial line (same side connection).
  2. Connect eDP Cable: Carefully connect the eDP cable from your LCD panel to the corresponding eDP output port (30P or 40P) on the driver board. Ensure the connection is secure and correctly oriented.
  3. Connect Video Input:
    • For DisplayPort (DP) input: Connect a standard DP cable from your source device (e.g., graphics card) to the DP input port on the driver board.
    • For Type-C input: Connect a Type-C cable from your source device to the Type-C power/input port on the driver board.
  4. Provide Power: The board is powered via the Type-C port. Ensure your Type-C source provides sufficient power.
  5. Power On: Press the power button on the board to turn it on. The LED power indicator will illuminate.

Note:

  • For 8K resolution support, it is highly recommended to use a Thunderbolt 4 compatible DP cable. Thunderbolt 3 cables typically support up to 4K resolution.
  • Ensure your graphics card and display also support the desired resolution and refresh rate.
Labeled diagram of 40P eDP Driver Board connections
Figure 2: 40P eDP Driver Board with labeled ports (Standard DP signal input, Type-C power in, Power button/brightness adjust, LED power indicator, eDP 40P output).
Labeled diagram of 30P eDP Driver Board connections
Figure 3: 30P eDP Driver Board with labeled ports (Standard DP signal input, Type-C power in, Power button/brightness adjust, LED power indicator, eDP 30P output).

4. Operation

Operating the driver board is straightforward:

  • Power On/Off: Press the designated button on the board to power it on or off.
  • Brightness Adjustment: The same button also functions as a brightness control. A 'touch infinite dimming' feature allows for fine adjustment of the display's backlight. Typically, a short press might toggle power, while a long press or repeated presses might adjust brightness. Refer to the specific behavior of your board.
  • LED Indicator: The LED light indicates the power status of the board.

5. Maintenance

To ensure the longevity and optimal performance of your driver board, follow these maintenance guidelines:

  • Keep Dry: Avoid exposing the board to moisture or liquids.
  • Clean Gently: If cleaning is necessary, use a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Handle with Care: Electronic components are sensitive. Avoid dropping the board or subjecting it to strong impacts.
  • Static Electricity: Take precautions against static discharge when handling the board, as it can damage sensitive components.
  • Storage: Store the board in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your driver board, refer to the following troubleshooting tips:

Problem Possible Cause Solution
No display on LCD panel
  • No power or insufficient power.
  • Incorrect or loose video input cable (DP/Type-C).
  • Incorrect or loose eDP cable connection.
  • Incompatible LCD panel.
  • Source device not outputting signal.
  • Ensure Type-C power source is connected and functional.
  • Check DP/Type-C cable connections. Try a different cable.
  • Verify eDP cable is securely connected and correctly oriented.
  • Confirm your LCD panel is compatible with the driver board (30P/40P).
  • Check source device display settings.
Incorrect resolution or refresh rate
  • Source device/graphics card limitations.
  • Display panel limitations.
  • Cable limitations.
  • Ensure your graphics card and display support the desired resolution/refresh rate.
  • For 8K, use a Thunderbolt 4 compatible DP cable.
  • Adjust display settings on your source device.
Brightness issues
  • Backlight voltage setting.
  • Brightness adjustment not applied.
  • Use the power button for 'touch infinite dimming' to adjust brightness.
  • Ensure backlight voltage (5-28V) is appropriate for your panel.

If the problem persists, please contact customer support.

7. Specifications

Feature Specification
Brand Name ETAxopowo
Model Number 2023527
Compatible Equipment Style Display Equipment
Origin Mainland China
Input Interfaces DisplayPort (DP), Type-C
Output Interfaces eDP 30P, eDP 40P
Max Resolution Support Up to 8K (with Thunderbolt 4 cable and compatible hardware)
Max Refresh Rate 120Hz
Adjustable Backlight Voltage 5-28V
Board Dimensions (L x W) 44.5mm x 31.5mm
Package Dimensions (L x W x H) 15cm x 10cm x 4cm
Package Weight 0.08 kg
Driver Board Dimensions: 44.5mm x 31.5mm
Figure 4: Driver Board Dimensions.

Compatible Screens

The driver board is compatible with a range of N-card and A-card screens. Please refer to the image below for a list of tested compatible screens. This list is not exhaustive, and compatibility may vary based on specific panel models and revisions.

List of N-card and A-card compatible screens
Figure 5: Examples of N-card and A-card compatible screens.

8. User Tips

  • This driver board is ideal for use with portable LCD displays, enabling high-resolution external display solutions.
  • Always use a high-quality DP cable, especially a Thunderbolt 4 compatible one, to achieve the best possible resolution and refresh rate.
  • The 'one-click power on' and 'touch infinite dimming' features provide convenient control over your display. Experiment with the button's press duration to understand its full functionality.
  • When connecting the eDP cable, ensure the correct pin configuration (30P or 40P) and proper orientation to avoid damage.

9. Warranty and Support

For any questions, technical support, or warranty inquiries regarding your ETAxopowo DP to eDP LCD Driver Board, please contact the seller or manufacturer directly. Keep your purchase records for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.