1. Introduction
This instruction manual provides detailed guidance for the installation, setup, and operation of the SUMRY Wifi Module (Solar Plug-RWB1). This module enables remote monitoring and control of compatible SUMRY solar inverters, offering a convenient way to manage your solar power system.

Figure 1: SUMRY Wifi Module (Solar Plug-RWB1) overview
2. Product Overview
2.1 Key Features
- Plug-and-Play with Easy Setup
- Effortless Real-Time Monitoring
- Support for Offline Monitoring
- Remote Control Capabilities
- Bluetooth Direct Connection for Proximal Monitoring
2.2 What's in the Box
The package typically includes:
- SUMRY Wifi Module (Solar Plug-RWB1)
- Communication Cable (may vary by model, e.g., RS232)
- Antenna (for models with external antenna)
- Mounting Screws (if applicable)
- Quick Installation Guideline (this manual provides comprehensive details)

Figure 2: Typical package contents (module, cable, antenna)
3. Safety Information
- Ensure the module is installed by qualified personnel.
- Always disconnect power to the inverter before connecting or disconnecting the Wifi module.
- Do not place the Wifi module directly on the inverter to avoid potential interference or overheating.
- Keep the device away from water and extreme temperatures.
- Use only the provided or recommended cables and accessories.
4. Installation
Follow these steps to install the Wifi module:
- Identify the correct interface code for your Datalogger Model. Refer to the table below:
Datalogger Model Interface Code Interface Icon Wi-Fi Plug Pro 1 
- Connect one end of the communication cable to the Wifi module.
- Connect the other RJ45 port of the cable to the COMM port of your SUMRY inverter. Ensure it is plugged in tightly.
- Securely place the Wifi module in a safe position. It is recommended not to place it directly on the inverter to avoid potential interference.
- Confirm the status of the LED lights. After step 2.3 (Network Setting), when 4 LED lights are on, it indicates normal working status.

Figure 3: Wifi Module connection to inverter
5. Setup
5.1 Download the App
Scan the QR codes below to download the SmartESS app for your device:

Figure 4: SmartESS App QR Codes (iOS and Android)
5.2 Wireless Router Connection
To connect the Wifi Datalogger to your wireless network:
- Select the same number of Wi-Fi Plug Pro ID to connect on your phone's WLAN. The initial password is 12345678.
- Open the SmartESS app.
- Tap the "Wi-Fi Config" button to enter the configuration page.
5.3 Network Setting
On the network setting page:
- Tap the "Network Setting" button.
- According to the prompts, input the necessary information to finish the network setting.
- After the Wi-Fi Plug Pro is restarted, reconnect the Wi-Fi which was connected in step 5.2.
5.4 Create Account and Add Datalogger
To create an account and add your datalogger:
- Open the app and tap the "Register" button to enter the account creation page.
- Follow the prompts to create your account.
- Log in to your account.
- Click the "+" button at the top right corner of the Datalogger page.
- Scan the QR Code on the Wi-Fi Plug Pro or input the PN manually.
- Follow the prompts to finish adding the datalogger.

Figure 5: SmartESS App setup process
6. Operation
The SUMRY Wifi Module provides comprehensive monitoring and control capabilities:
6.1 Proximal Monitoring (Bluetooth)
Through a direct Bluetooth connection, your mobile phone can connect to the Internet to view device data. Even without a network connection, you can still view device data. The system supports data viewing, control, alarm management, and debugging functions. You can also set passwords to prevent unauthorized access.
6.2 Real-Time Data Monitoring
- Data: View the energy flow diagram and detailed parameters of the equipment. Parameters are refreshed in real-time.
- Control: Issue commands to the equipment, set functions, and modify data.
- Alarms: View all alarms currently happening in the device.
- Debug: Directly send commands to the device. Click the upper right corner in the app to modify the data format for sending/receiving.

Figure 6: Real-Time Monitoring capabilities
6.3 Product Video Overview
Watch this video for a visual overview of the SUMRY Wifi Module:
Video 1: SUMRY Wifi Module Product Overview
7. Maintenance
- Keep the module clean and free from dust.
- Periodically check all cable connections to ensure they are secure.
- Ensure the module is in a well-ventilated area to prevent overheating.
- Regularly check for app updates to ensure optimal performance and access to new features.
8. Troubleshooting
8.1 Common Issues and Solutions
- PWR LED not lit:
Ensure the module is correctly connected to the inverter's COMM port and the inverter is powered on. Check the cable for damage.
- Datalogger sees the module, but the inverter does not transmit parameters:
Verify that the communication cable is securely connected to both the module and the inverter. Ensure the inverter's communication settings are correctly configured for the module. Check for any error messages in the app's debug section.
- App cannot connect to the module:
Ensure your phone's Wi-Fi is connected to the module's Wi-Fi network (initial password 12345678). If already configured for your home network, ensure your phone is on the same network. Restart the module and try again.
- Module not connecting to home Wi-Fi:
Double-check the Wi-Fi network name (SSID) and password entered during the network setting process. Ensure the module is within range of your Wi-Fi router.
9. Specifications
| Attribute | Value |
|---|---|
| Brand Name | SUMRY |
| Model | Solar Plug-RWB1 (Compatible with SP HGS, SP RS EP, Vmax inverters) |
| Is Smart Device | Yes |
| Maximum Current | NONE |
| Origin | Mainland China |
| Certification | CE |
| Package Length | 15 cm |
| Package Width | 5 cm |
| Package Height | 5 cm |
| Package Weight | 0.1 kg |
10. User Tips
- Compatibility Check: This Wifi module is specifically designed to work with SUMRY inverters. Ensure your inverter is a SUMRY model for proper functionality.
- Remote Monitoring: The primary purpose of this module is to provide remote monitoring and control capabilities for your solar inverter, allowing you to manage your system efficiently from your smartphone.
- Offline Access: Utilize the Bluetooth direct connection feature for proximal monitoring even when your home network is unavailable.
- Security: Remember to set a strong password for your account and consider changing the default Wi-Fi password of the module if prompted, to protect your system from unauthorized access.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the SUMRY Official Store or your authorized dealer. Keep your purchase receipt as proof of purchase.