UGREEN 25766

Contents

UGREEN Magnetic Metal Ring User Manual

Model: 25766

1. Introduction

The UGREEN Magnetic Metal Ring is designed to enhance the magnetic capabilities of your phone case, making it compatible with MagSafe accessories and wireless chargers. This universal accessory allows both Android and iPhone users to experience the convenience of magnetic attachment for various MagSafe-compatible products.

UGREEN Magnetic Ring for easy wireless charging, compatible with Android and iPhone

Image 1.1: UGREEN Magnetic Ring enabling easy wireless charging for Android and iPhone devices.

Magnetic Pro. Magnetic Snap, showing compatibility with various MagSafe accessories like car vent mount, power bank, wallet, charger, and charging stand.

Image 1.2: The Magnetic Ring seamlessly integrates with various MagSafe accessories, including car mounts, power banks, wallets, and charging stands.

2. Package Contents

Please check the package for the following items:

  • UGREEN Magnetic Metal Ring (2 pieces)
  • UGREEN Retail Box
Packing List, showing two UGREEN metal rings and the retail box.

Image 2.1: Contents of the UGREEN Magnetic Metal Ring package.

3. Installation Guide

Follow these steps for a hassle-free installation:

  1. Clean the Phone Case Surface: Ensure the outside surface of your phone case is clean and dry. Use a soft cloth to remove any dust, dirt, or oils.
  2. Peel Off Protective Film: Carefully peel off the protective film from the adhesive side of the metal ring.
  3. Attach the Metal Ring: Stick the metal ring firmly to the outside of your phone case. Press down for a few seconds to ensure strong adhesion.

Important Note:

  • This product is designed for smooth plastic cases.
  • Cases made of silicone, leather, or glass are NOT supported for optimal adhesion and magnetic performance.
Installation Tips with three steps: 1. Clean phone case outside, 2. Peel off protective film, 3. Stick metal ring to the case outside.

Image 3.1: Step-by-step guide for attaching the Magnetic Metal Ring.

Hassle-Free Installation, showing a phone with the magnetic ring and a warning that silicone, leather, and glass cases are not supported.

Image 3.2: Illustration of proper installation and unsupported case types.

4. Operating Instructions

Once the UGREEN Magnetic Metal Ring is securely attached to your phone case, your device is ready to interact with MagSafe-compatible accessories.

4.1. Using with Wireless Chargers

Simply place your phone (with the magnetic ring attached) onto a MagSafe wireless charger. The ring will align your device perfectly for efficient wireless charging.

Make Wireless Charging Possible, showing a phone with the magnetic ring attached, wirelessly charging on a MagSafe charger.

Image 4.1: Phone wirelessly charging with the Magnetic Metal Ring.

4.2. Using with Magnetic Holders and Stands

Attach your phone to any MagSafe-compatible car mount, desk stand, or other magnetic holder. The strong magnetic connection ensures your device stays securely in place.

One Ring to Rule All, illustrating the ring on a phone case, phone on a stand, and phone attaching to a MagSafe accessory.

Image 4.2: Versatile use of the Magnetic Metal Ring with various accessories.

4.3. Wide Compatibility

The UGREEN Magnetic Metal Ring is universally compatible with a wide range of smartphones, including iPhones (e.g., iPhone 14, 15, 16 Pro) and Android phones (e.g., Samsung Galaxy S9 Ultra, Google Pixel). It allows these devices to utilize MagSafe accessories effectively.

Wide Compatibility, showing compatibility with iPhone, Samsung, and other devices/accessories like car mounts and MagSafe chargers.

Image 4.3: The Magnetic Metal Ring offers wide compatibility across different phone brands and MagSafe accessories.

5. Maintenance

To ensure the longevity and optimal performance of your UGREEN Magnetic Metal Ring:

  • Keep the surface of the ring clean from dust and debris. Wipe gently with a soft, dry cloth if needed.
  • Avoid exposing the adhesive to excessive moisture or extreme temperatures, which could weaken the bond.
  • Do not attempt to forcefully remove and reapply the ring multiple times, as this may compromise the adhesive strength.

6. Troubleshooting

6.1. Weak Magnetic Connection

  • Check Case Material: Ensure your phone case is made of smooth plastic. Silicone, leather, or glass cases are not recommended as they can interfere with magnetic strength or adhesion.
  • Proper Placement: Verify the ring is centered correctly on your phone case, aligning with the wireless charging coil if applicable.
  • Multiple Rings: For stronger magnetic force, especially with thicker cases or heavier accessories, consider using both rings provided in the package. One can be placed on the outside and another on the inside of the case, if feasible.

6.2. Adhesive Not Sticking Well

  • Clean Surface: Re-ensure the phone case surface was thoroughly cleaned and dried before application. Any residue can prevent proper adhesion.
  • Initial Pressure: Make sure sufficient pressure was applied during the initial installation to create a strong bond.
  • One-Time Application: The adhesive is designed for a single, permanent application. Repeated removal and reapplication will significantly reduce its effectiveness.

7. Specifications

Brand UGREEN
Product Name UGREEN Metal Ring
Model Number 25766
Material Metal
Type Magnetic Holder
Features Magnetic
Has Speaker No
Compatible Brand Universal
Charger No
Origin Mainland China
Package Dimensions (L x W x H) 5 cm x 5 cm x 5 cm
Package Weight 0.031 kg
Strengthens Magnetism Metal Ring, showing multiple rings and a phone with a ring, emphasizing enhanced magnetic strength.

Image 7.1: The metal ring strengthens magnetism for secure attachment.

8. User Tips

  • Enhanced Magnetic Force: For maximum magnetic strength, especially with thicker phone cases or when attaching heavier accessories like power banks, consider using both rings provided. One can be placed on the outside and the other on the inside of your phone case.
  • Careful Placement: The adhesive is strong, so ensure precise placement during installation. Repositioning after initial application can be tricky and may reduce adhesive effectiveness.
  • Android Compatibility: This magnetic ring is an excellent solution for Android users who wish to utilize MagSafe accessories, providing strong magnetic adhesion for car holders, wireless chargers, and more.
  • Not a Magnet: The UGREEN Metal Ring is a magnetic metal plate, not a magnet itself. It works by providing a ferrous surface for external magnets (like those in MagSafe accessories) to adhere to.

9. Warranty and Support

9.1. Warranty Information

  • Return Policy: Enjoy 7 days to return if any quality problems are encountered.
  • Product Warranty: All UGREEN products come with a 1-year warranty from the store.

9.2. Customer Support

For any inquiries or support needs, please contact UGREEN customer service. All emails will be answered within 24 hours.

Warranty & Service section from a larger image, detailing 7-day return, 1-year warranty, and 24-hour email support.

Image 9.1: Overview of UGREEN's warranty and service terms.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.