1. Introduction
This manual provides essential information for the safe and effective use of your Senyang Alternating Pressure Anti-Bedsore Air Medical Mattress, Model T05+P06C. This system is designed to aid in the prevention and treatment of pressure ulcers (bedsores) by continuously changing pressure points, promoting blood circulation, and enhancing patient comfort. Please read this manual thoroughly before setup and operation to ensure proper usage and to maximize the benefits of the product.
2. Package Contents
Carefully unpack all components and verify that all items are present and undamaged. If any items are missing or damaged, please contact customer support immediately.
- Air Mattress (80"L x 34"W x 4.5"H, 18 cells)
- Air Pump (Control Unit)
- Repair Kit
3. Specifications
The following table outlines the key specifications for the Senyang Alternating Pressure Anti-Bedsore Air Medical Mattress system:
| Feature | Specification |
|---|---|
| Brand Name | Senyang |
| Model Number | T05+P06C |
| Mattress Dimensions | 80"L x 34"W x 4.5"H (18 cells) |
| Air Cell Material | Medical grade Nylon TPU |
| Cover Material | Stretched PU, waterproof |
| Weight Capacity | 150 KG |
| Pump Size | 27.5L x 12W x 10H cm |
| Pump Cycle Time | 6 / 9 / 12 / 25 minutes (adjustable) |
| Air Output | More than 6 Liter/min |
| Pressure Range | 14mmHg - 62mmHg |
| Features | Foldable, Care Mattress |
| Application | Hospital |
| Warranty | Mattress: 1 year, Pump: 2 years |
4. Setup Instructions
Follow these steps to properly set up your alternating pressure mattress system:
- Prepare the Bed: Place the mattress on a standard hospital bed frame. Ensure the bed surface is clean and free of sharp objects.
- Position the Mattress: Lay the air mattress flat on the bed frame. Ensure the foot end of the mattress aligns with the foot end of the bed. The air hoses should be positioned towards the foot end.
- Secure the Mattress: If your mattress has straps or ties, secure it to the bed frame to prevent shifting.
- Place the Pump: Hang the air pump (control unit) securely at the foot end of the bed, typically on the bed rail, using the integrated hooks. Ensure it is stable and not prone to falling.
- Connect Air Hoses: Connect the air hoses from the mattress to the corresponding air outlets on the pump. Ensure connections are firm and secure to prevent air leakage. The image below shows the mattress and pump connected.
- Connect Power: Plug the pump's power cord into a grounded electrical outlet.
- Initial Inflation: Turn on the pump using the power switch. The mattress will begin to inflate. Allow approximately 20-30 minutes for the mattress to fully inflate and stabilize before placing a patient on it.
5. Operating Instructions
Once the mattress is inflated, you can adjust the settings on the control unit to suit the patient's needs.
5.1 Control Panel Overview
The pump's control panel features various buttons and indicators for managing the mattress's functions.
5.2 Key Functions
- Power Switch: Located on the side or back of the pump, turns the unit ON/OFF.
- Pressure Adjustment: Use the pressure control dial or buttons to set the desired pressure range (14mmHg - 62mmHg). Adjust according to patient comfort and clinical guidelines.
- Cycle Time: Select the alternating cycle time (6, 9, 12, or 25 minutes) using the dedicated button or dial. This determines how frequently the pressure in the air cells alternates.
- Panel Lock: Activates or deactivates the control panel lock to prevent accidental changes to settings.
- Static/Initiating Mode: This mode typically provides constant low pressure for patient transfers or when alternating pressure is not desired. 'Initiating' may refer to the initial inflation phase.
- Auto Firm: Provides maximum inflation for a firm surface, useful for patient repositioning or care procedures.
- Alarm Reset: Silences any active alarms (e.g., low pressure alarm). Address the cause of the alarm before resetting.
5.3 General Operation
- After initial inflation, adjust the pressure setting to a comfortable level for the patient, ensuring adequate support without bottoming out.
- Select an appropriate cycle time. Shorter cycles provide more frequent pressure changes.
- Monitor the patient regularly for comfort and skin integrity. Adjust settings as needed.
- In case of a power outage, the mattress will slowly deflate. Ensure alternative care plans are in place.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your mattress system.
6.1 Cleaning
- Mattress Cover: The stretched PU, waterproof cover can be wiped down with a mild disinfectant solution. Ensure the cover is completely dry before use. Do not immerse the mattress or pump in water.
- Air Pump: Wipe the exterior of the pump with a damp cloth. Do not use abrasive cleaners or solvents.
6.2 Leak Checks and Inspection
Periodically inspect the mattress and hoses for any signs of wear, punctures, or leaks.
- Hose Inspection: Check air hoses for leaks when they are ready for use.
- Mattress Inflation Check: The manufacturer performs a full check on mattresses with a 24-hour air inflation inspection to ensure quality. Users should also periodically check for consistent inflation.
6.3 Repair Kit Usage
Use the provided repair kit for minor punctures in the air mattress. Follow the instructions included with the repair kit for proper application.
7. Troubleshooting
If you encounter issues with your mattress system, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not turning on | No power supply | Check power cord connection and wall outlet. Ensure power switch is ON. |
| Mattress not inflating or losing pressure | Loose hose connection, puncture in mattress/hoses, pump malfunction | Ensure all hose connections are secure. Inspect mattress and hoses for visible damage; use repair kit for small punctures. If problem persists, contact support. |
| Pump is noisy | Normal operation, pump not placed on a stable surface | Some noise is normal. Ensure pump is securely hung or placed on a flat, stable surface to minimize vibration. |
| Alarm sounds | Low pressure, power failure | Check for leaks or power issues. Press 'Alarm Reset' after resolving the issue. |
8. Warranty and Support
Senyang is committed to providing high-quality products and excellent customer service.
8.1 Product Warranty
- Mattress: 1-year warranty from the date of purchase.
- Pump: 2-year warranty from the date of purchase.
This warranty covers manufacturing defects under normal use. It does not cover damage due to misuse, accidents, or unauthorized modifications.
8.2 Customer Support
For any questions regarding the use, maintenance, or troubleshooting of your Senyang mattress system, please contact our customer service team.
- We provide online guidance for product usage inquiries.
- Complaints are handled within 24 hours.
- Within a reasonable range, free parts can be delivered by courier.
8.3 Quality Assurance and Certifications
Our products adhere to strict quality control standards and have obtained various system and quality certificates, including ISO13485, TUV, CE, and 510K, ensuring reliability and safety.
