1. Introduction
This product is a replacement defrost heating element designed for various Haier double-door refrigerators. The defrost heating element plays a crucial role in preventing ice buildup on the evaporator coils, ensuring efficient cooling and proper functioning of your refrigerator. Regular maintenance and timely replacement of a faulty heating element are essential for the longevity and performance of your appliance.
2. Safety Information
WARNING: Electrical Shock Hazard
- Always disconnect power to the refrigerator before attempting any installation, repair, or maintenance. Failure to do so can result in serious injury or death.
- If you are not experienced with appliance repair, it is highly recommended to seek assistance from a qualified technician.
- Wear appropriate personal protective equipment, including gloves and eye protection, during installation.
- Ensure all connections are secure and properly insulated after installation.
3. Product Overview and Models
This manual covers several models of defrost heating elements compatible with a wide range of Haier double-door refrigerators. Each element is designed to meet specific dimensions and electrical requirements. Please verify the correct model number for your appliance before purchase and installation.

The following heating element models are available:
- 0064000843
- 0064000843F
- 0064001878
- 0064001692
- 0064001879
- 0064001996
- 0064001680
- 0064001680B
- 0064001597
- 0064001426
- 0064002086
- 0064000353
For detailed compatibility with specific Haier refrigerator models, please refer to the product listing or consult with a qualified technician.
4. Specifications
These defrost heating elements are made of metal and are CE certified. Below are the detailed specifications for some common models:
| Attribute | Value |
|---|---|
| Material | Metal |
| Certification | CE |
| Origin | Mainland China |
| High-concerned chemical | None |
4.1. Model-Specific Dimensions






5. Installation Guide
IMPORTANT: Installation of a defrost heating element involves working with electrical components and refrigerant lines. It is strongly recommended that this procedure be performed by a qualified appliance repair technician to ensure safety and proper functionality.
General steps for replacement (for informational purposes only):
- Disconnect Power: Unplug the refrigerator from the power outlet.
- Access Evaporator: Locate and remove the freezer compartment's back panel to access the evaporator coil and the existing defrost heating element. This may involve removing shelves, ice maker components, and screws.
- Disconnect Old Element: Carefully disconnect the wiring from the old heating element. Note the position and connection points for reassembly.
- Remove Old Element: Detach the old heating element from the evaporator coil. It may be clipped or secured with fasteners.
- Install New Element: Position the new defrost heating element in the same location as the old one, ensuring it is securely fastened.
- Connect Wiring: Connect the wiring to the new heating element, matching the connections noted earlier. Ensure all connections are tight and insulated.
- Reassemble: Reinstall the freezer compartment's back panel, shelves, and any other components removed.
- Restore Power: Plug the refrigerator back into the power outlet.
- Test Functionality: Monitor the refrigerator's performance to ensure the defrost system is working correctly.
6. Maintenance
To ensure the optimal performance and longevity of your refrigerator's defrost system:
- Regularly check for excessive ice buildup in the freezer compartment. If ice accumulates rapidly, it may indicate a problem with the defrost system, including the heating element.
- Keep the freezer door seals clean and intact to prevent warm air from entering, which can lead to increased frost.
- Ensure proper air circulation around the refrigerator and within the freezer compartment.
7. Troubleshooting
If your refrigerator is experiencing defrosting issues after replacing the heating element, consider the following common problems:
- Excessive Frost Buildup: This is the primary symptom of a faulty defrost system. If it persists after replacing the heating element, check the defrost thermostat, defrost timer, or main control board.
- Refrigerator Too Warm/Freezer Too Warm: A non-defrosting evaporator can restrict airflow, leading to inadequate cooling.
- Water Leaking: If the defrost drain is clogged, melted ice can overflow and leak into the refrigerator or onto the floor. Ensure the drain is clear.
- New Element Not Heating: Verify all electrical connections are secure. Test the new heating element for continuity with a multimeter (after disconnecting power).
For complex issues, consult a professional appliance repair technician.
8. User Tips
When replacing your defrost heating element, always double-check the model number of your existing part against the replacement part to ensure perfect compatibility. Even small variations can lead to improper fit or function. Taking photos of the wiring before disconnection can be very helpful during reassembly.
9. Frequently Asked Questions (FAQ)
- Q: What voltage is this heating element rated for?
- A: The voltage rating for this specific heating element is not explicitly provided in the product description. Defrost heating elements typically operate at the standard household voltage (e.g., 120V or 240V depending on region and appliance). Please refer to your refrigerator's original specifications or the label on the old heating element for precise voltage information. If unsure, consult a qualified technician.
10. Warranty and Support
For any questions regarding product compatibility, installation, or troubleshooting, please contact the seller or a certified appliance technician. Information regarding specific warranty terms should be obtained directly from the seller at the time of purchase.
11. Company Overview
The seller, AQL 001Parts Store, specializes in a wide range of appliance parts, including those for refrigerators, washing machines, and air conditioners. They emphasize a large inventory of original and new accessories, professional pre-sales customer service, and experienced maintenance technicians for after-sales support.