1. Introduction
The Mestek Multi-Functions Wire Tracker (Models WT58D and WT58DL) is a versatile tool designed for professionals and enthusiasts to efficiently track, test, and troubleshoot various types of cables. It features wire tracking, wire testing, RJ45 cable sequence testing, non-contact AC voltage detection (NCV), and for the WT58DL model, a visual-red-light emitter for fiber-optic cable testing. This manual provides detailed instructions for safe and effective use of your device.
2. Safety Information
Always observe basic safety precautions when using electrical equipment. The device features Non-contact AC Voltage Detection (NCV) to help identify live wires (above 48V) for user safety. Do not attempt to test circuits with voltages exceeding the device's specified limits. Ensure the device is in good working condition before use.
3. Package Contents
Upon unpacking, please verify that all items listed below are present:
- Laucher (Transmitter)
- RJ45 Adapter
- Earphone
- Receiver
- RJ11 Alligator Clip Adapter
- Batteries 9V 6F22*2 (Optional)
- Portable Bag
4. Product Overview and Components
Familiarize yourself with the main components of the Mestek Wire Tracker:
4.1. Laucher (Emitter)
- RJ11 Interface: For connecting telephone cables.
- RJ45 Interface: For connecting network cables.
- Signal Indicator: LED lights (1-8, G) to display wire sequence and status.
- Switch: Power on/off and mode selection.
- Wire Sequence Button: Initiates wire sequence testing.
- Wire Scan Button: Initiates wire tracking/scanning.
- Visual-red-light emitter: (For WT-58DL Only) For fiber-optic cable testing.
4.2. Receiver
- Probe: For tracing and locating wires.
- Flashlight: Provides illumination in dark environments.
- Volume Adjustment: Dial to adjust the sound level of the tracking signal (1 to 9 gear).
- On/Off Button: Powers the receiver on or off.
- Flashlight Button: Activates/deactivates the flashlight.
- Wire Scan Button: Initiates wire tracking/scanning.
- NCV Button: Activates Non-contact AC Voltage Detection.
- Visual-Red-light emitting: (Long Press, For WT58DL Only) For fiber-optic cable testing.
- RJ45 Interface: For connecting network cables for sequence testing.
5. Setup
5.1. Battery Installation
The device requires two 9V 6F22 batteries (not always included). To install or replace batteries:
- Locate the battery compartment on the back of both the Laucher and Receiver units.
- Open the battery cover.
- Insert two 9V 6F22 batteries, ensuring correct polarity.
- Close the battery cover securely.
6. Operating Instructions
6.1. Wire Tracking and Testing
This function helps locate and identify specific wires within a bundle or wall.
- Connect one end of the cable to be tracked to the appropriate RJ11 or RJ45 interface on the Laucher (Emitter) unit.
- Turn on the Laucher unit.
- Turn on the Receiver unit.
- Press the 'Wire Scan Button' on the Receiver.
- Move the Receiver's probe along the suspected path of the cable. The Receiver will emit an audible tone and/or light indication when it detects the signal from the Laucher.
- Adjust the 'Volume Adjustment' dial on the Receiver (1 to 9 gear) to enhance signal detection and accuracy.
6.2. RJ45 Cable Sequence Test
This function verifies the correct wiring sequence of RJ45 network cables.
- Connect one end of the RJ45 cable to the RJ45 interface on the Laucher (Emitter).
- Connect the other end of the RJ45 cable to the RJ45 interface on the Receiver.
- Turn on both units.
- Press the 'Wire Sequence Button' on the Laucher.
- Observe the LED indicators (1-8, G) on both units. They should light up in sequence (1-2-3-4-5-6-7-8-G) if the wiring is correct. If there is a wrong sequence, the corresponding LED will skip or not light up.
6.3. Non-contact AC Voltage Detection (NCV)
Use this feature to detect the presence of AC voltage without direct contact, enhancing safety.
- Turn on the Receiver unit.
- Press the 'NCV Button' on the Receiver.
- Bring the probe tip of the Receiver close to the wire or outlet you wish to test.
- If AC voltage above 48V is detected, the Receiver will indicate with an audible alarm and/or visual signal.
6.4. Fiber Optic Cable Testing (WT-58DL Only)
The WT-58DL model includes a visual-red-light emitter for testing fiber optic cables.
- Ensure you have the WT-58DL model.
- Connect the fiber optic cable to the visual-red-light emitter port on the Laucher (Emitter). The emitter supports ST, SC, and FC interfaces.
- Turn on the Laucher unit.
- Observe the other end of the fiber optic cable for the red light, indicating continuity.
- For the Receiver, long-press the 'Visual-Red-light emitting' button to activate its fiber optic testing function.
6.5. Other Functions
- Rapid Breakpoint Locating: Helps quickly find breaks in cables.
- Tracking for POE, Router Optical Modem: Capable of directly tracking wires for Power over Ethernet (POE), router optical modems, and other weak current equipment operating at less than DC 60V.
7. Applications
The Mestek Wire Tracker is suitable for a variety of tasks, including:
- Network Wiring installation and verification.
- Wires Maintenance and repair.
- Troubleshooting cable connectivity issues.
- Testing POE Switches, Routers, and Optical Modems.
- Verifying RJ45 and RJ11 cables.
- General wire identification and tracing.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MESTEK |
| Model Number | WT58D, WT58DL |
| Origin | Mainland China |
| Certification | CE |
| Operating Temperature | 0~40°C |
| Storage Temperature | -10~50°C |
| Batteries | 2 x 9V 6F22 |
| Receiver Size | 190 x 40 x 23mm |
| Launcher Size | 140 x 60 x 25mm |
| Wire Tracking/Testing | For Network Switches, Router Optical Modem, weak current equipment (<DC 60V), RJ45, RJ11, and other wires. Max distance: 300m. |
| Wire Sequence Testing | 9 LED indicators (1-8, G) for RJ45 cables. |
| Non-contact AC Voltage Detection (NCV) | Detects AC voltage above 48V. |
| Fiber-optic Cable Testing (WT58DL Only) | Visual-red-light emitter (Power: 5mV, Max distance: 5km, Wavelength: 650nm). Supports ST/SC/FC interfaces. |
| Other Functions | Rapid Breakpoint Locating. |
9. Troubleshooting
If you encounter issues with your Mestek Wire Tracker, consider the following common solutions:
- No Power: Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
- No Signal during Tracking: Ensure the cable is properly connected to the Laucher. Verify the Laucher is powered on. Adjust the Receiver's volume. Ensure the cable is within the device's detection range (300m for general tracking).
- Incorrect RJ45 Sequence Test Results: Double-check that both ends of the RJ45 cable are securely connected to the Laucher and Receiver. Inspect the cable for visible damage.
- NCV Not Detecting Voltage: Ensure the NCV button is pressed and the probe is close enough to the AC source (above 48V).
- Fiber Optic Test Failure (WT58DL): Confirm the fiber optic cable is clean and properly connected to the emitter. Check for physical damage to the fiber.
10. Maintenance
- Cleaning: Wipe the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
- Battery Replacement: Replace batteries promptly when the low battery indicator appears or if the device's performance degrades.
- Avoid Impact: Protect the device from drops and strong impacts.
11. User Tips
- Adjust Volume: When wire tracking, always adjust the receiver's volume to a comfortable level for optimal signal detection, especially in noisy environments.
- Safety First: Before working on any wiring, always use the NCV function to check for live voltage to ensure your safety.
- Cable Management: For complex installations, label cables to simplify future troubleshooting with your wire tracker.
- Fiber Optic Care (WT58DL): Keep fiber optic connectors clean and protected when not in use to ensure accurate testing.
12. Warranty and Support
For warranty information, technical support, or service inquiries, please contact Mestek customer service or your authorized dealer. Keep your purchase receipt as proof of purchase.