1. Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of Dooya DM45R-50/12 (Built-in RF433, 3-core wire) and DM45S-50/12 (External Motor, 4-core wire) tubular motors. These motors are designed for use with rolling blinds, canopies, and electric sunshades, offering reliable and efficient automation.

2. Specifications
The Dooya DM45 series tubular motors come in different configurations. Key specifications for the DM45R-50/12 and DM45S-50/12 models are detailed below:
| Parameter | DM45R-50/12 | DM45S-50/12 |
|---|---|---|
| Rated Torque | 50N | 50N |
| Rated Speed | 12r/min | 12r/min |
| Rated Voltage | 220V | 220V |
| Rated Current | 0.89A | 2.6A |
| Rated Power | 205W | 205W |
| Motor Diameter | 45mm | 45mm |
| Outer Tube Length | 625mm | 525mm |
| Motor Total Length | 604mm | 514mm |
| Certification | CE | CE |
| Battery Included | No | No |


3. Installation and Wiring
Before installation, ensure the power supply is disconnected. Identify your motor type (DM45R or DM45S) as this determines the wiring and control method.
3.1 Motor Distinction and Wiring
The primary difference between the DM45R and DM45S models lies in their wiring and built-in RF capabilities:
- DM45R (Built-in Motor): Features a built-in RF433 module and uses a 3-core wire. It has a black antenna for RF signal reception.
- DM45S (External Motor): Does not have a built-in RF433 module and uses a 4-core wire. It does not have an external antenna.

Wiring Color Code:
- Blue: Zero line
- Brown: Fire Wire 1
- Black: Fire Wire 2 (for 4-core external motors)
- Yellow/Green: Ground wire
3.2 Components for Motorized Roller Blinds
A typical motorized roller blind setup includes the tubular motor and several accessories:

Essential components include:
- Tubular Motor (e.g., DM35RQ - 6/20)
- Drive Adapter (DL01)
- Wall Bracket (DZ319B)
- Idler Bracket (DZ318B)
- Driving Tube (DG02)
- Fabric
- Bottom Beam
- Single-channel emitter (DC1600) for control

3.3 Installation Steps (General)
- Mount the wall brackets securely to the desired location.
- Attach the drive adapter and crown to the motor.
- Insert the motor assembly into the driving tube.
- Place the driving tube with the motor into the mounted brackets, ensuring the drive adapter engages with the drive wheel and the idler bracket supports the other end.
- Connect the motor wiring according to the specific motor type (DM45R or DM45S) and control method.
- Ensure all connections are secure and insulated.
4. Operation
The operation of your tubular motor depends on whether it's a built-in RF model (DM45R) or an external motor (DM45S) with or without an external receiver.
4.1 External Tubular Motor (DM45S) with Mechanical Hand Switch
For DM45S motors, a mechanical hand switch can be used for basic up, down, and stop functions. The 3-core wire from the motor connects to the switch, which then receives 220V AC power.

4.2 External Tubular Motor (DM45S) with External Receiver and Remote Control
To enable remote control functionality for DM45S motors, an external receiver (e.g., DC254) is required. The motor connects to the receiver, which then receives 220V AC power. The remote control (e.g., DC305) pairs with the receiver to provide wireless control.

4.3 Built-in Motor (DM45R) with Wireless Switch or Remote Control
The DM45R motor has a built-in RF433 receiver, simplifying installation. It connects directly to 220V AC power. Control is achieved wirelessly using a compatible wireless switch (e.g., DC863) or wireless remote controller (e.g., DC305).

5. Maintenance
To ensure the longevity and optimal performance of your Dooya tubular motor, follow these general maintenance guidelines:
- Regular Cleaning: Keep the motor and surrounding area free from dust and debris. Use a soft, dry cloth for cleaning.
- Inspect Wiring: Periodically check all wiring connections for any signs of wear, damage, or loose connections. Ensure proper insulation.
- Lubrication: The motor is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.
- Obstruction Check: Ensure that the roller blinds, canopy, or sunshade operate smoothly without any obstructions that could strain the motor.
- Professional Inspection: If you notice any unusual noises, erratic operation, or significant performance degradation, consult a qualified technician.
6. Troubleshooting
If you encounter issues with your tubular motor, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not respond to control. | No power supply, loose wiring, remote control battery low, remote not paired (for RF models). | Check power connection. Inspect wiring. Replace remote battery. Re-pair remote with motor/receiver. |
| Motor runs but blind does not move. | Drive adapter or crown not properly engaged with the tube. | Verify that the drive adapter and crown are correctly installed and engaged with the driving tube. |
| Motor makes unusual noise. | Obstruction, worn components, motor overload. | Check for obstructions. Reduce load if possible. If noise persists, professional inspection is recommended. |
| Blind stops prematurely or does not reach limits. | Limit settings incorrect. | Refer to the motor's specific limit setting instructions (usually involves adjustment screws on the motor head). |
7. User Tips
- Identify Motor Type Carefully: When ordering or replacing, pay close attention to whether you need a "Built-in RF433 module" (DM45R, 3-wire) or an "External Motor" (DM45S, 4-wire) as their wiring and control methods differ significantly.
- Understand Model Numbers: The 'S' in a model number (e.g., DM35S, DM45S) typically indicates an external motor, while 'R' (e.g., DM35R, DM45R) indicates a built-in motor with RF capabilities.
- Power and Speed: Be aware that models like 40/15 and 50/12 refer to torque (e.g., 40N vs 50N) and speed (e.g., 15r/min vs 12r/min). Choose the appropriate motor based on the size and weight of your application.
8. Frequently Asked Questions (FAQ)
- Q: What is the difference between a DM45RD-50/12 and a DM45R-50/12?
- A: The DM45R-50/12 is a built-in motor with RF433 capabilities, typically using a 3-core wire. The 'D' in DM45RD might indicate a specific variant or a different generation, but generally, the 'R' signifies built-in RF. Always verify the wiring (3-core vs 4-core) and the presence of an antenna to confirm the motor type.
- Q: What is the difference between 40/15 and 50/12 in motor specifications?
- A: These numbers typically refer to the motor's rated torque and rated speed. For example, a "40/15" motor would have a rated torque of 40 Newton-meters (Nm) and a rated speed of 15 revolutions per minute (r/min). A "50/12" motor would have 50 Nm torque and 12 r/min speed. Higher torque is needed for heavier blinds/shades, while speed affects how quickly the blind opens or closes.
9. Warranty and Support
Dooya tubular motors are CE certified, indicating compliance with European safety, health, and environmental protection requirements.
For warranty claims, technical support, or service inquiries, please contact your original point of purchase or an authorized Dooya service center. Keep your purchase receipt and product model information handy.