AUX YKR-H/102E

Contents

YKR-H/102E Replacement Remote Control Instruction Manual

For AUX AC Air Conditioners and Compatible Models

Introduction

This manual provides instructions for the YKR-H/102E replacement remote control, designed for use with AUX AC air conditioners and other compatible models such as AUXIA AC YKR-H/006E and YKR-H/101E. This remote control offers a comfortable and intuitive way to manage your air conditioning unit's functions.

Remote control in hand, pointing at an AC unit, demonstrating long-distance control.
Figure 1: YKR-H/102E Remote Control in use, highlighting its long-distance capability.

1. Setup

1.1 Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide open the battery cover.
  3. Insert two AAA batteries (not included), ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Close the battery cover securely.
Front and back view of the YKR-H/102E remote control, showing the battery compartment on the back.
Figure 2: Front and back view of the YKR-H/102E remote control, indicating the battery compartment.

1.2 Initial Use

This is a replacement remote control and typically does not require programming. Once batteries are installed, point the remote directly at your compatible air conditioner unit and press the ON/OFF button to test functionality.

2. Operating Instructions

The remote control features a clear display and ergonomically designed buttons for ease of use. Refer to the button descriptions below for specific functions.

Detailed views of the remote control, highlighting clear screen, comfortable design, long-distance control, and ergonomic design.
Figure 3: Key features of the remote control, including clear screen and ergonomic design.

2.1 Button Functions

  • ON/OFF: Powers the air conditioner on or off.
  • SET: Used to confirm settings or enter setup modes.
  • MODE: Cycles through operating modes: AUTO, COOL, DRY, HEAT.
  • SLEEP: Activates or deactivates the sleep mode for comfortable night operation.
  • SWING (Up/Down): Adjusts the vertical airflow direction.
  • SWING (Left/Right): Adjusts the horizontal airflow direction.
  • TURBO: Engages maximum fan speed for rapid cooling or heating.
  • SPEED: Adjusts fan speed (HIGH, MID, LOW).
  • DISPLAY: Toggles the display on the air conditioner unit.
  • °C/°F: Switches the temperature display between Celsius and Fahrenheit.
  • iFEEL: Activates the 'I Feel' function, which senses the temperature at the remote's location.
  • Anti-F: (Anti-Fungus) Activates a function to prevent mold growth.
  • ELE.H: (Electric Heating) Activates auxiliary electric heating.
  • HEALTH: Activates air purification or health-related functions.
  • TIMER: Sets a timer for the air conditioner to turn on or off.
  • ECO: Activates energy-saving mode.
  • CLEAN: Initiates a self-cleaning function for the indoor unit.

3. Maintenance

3.1 Battery Replacement

Replace batteries when the remote's display becomes dim or the remote fails to operate the air conditioner from a normal distance. Always replace both batteries simultaneously with new ones of the same type (AAA).

3.2 Cleaning

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these may damage the remote's surface or internal components.

3.3 Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage. Store the remote in a cool, dry place away from direct sunlight.

4. Troubleshooting

Problem Possible Cause Solution
Remote not responding. Dead or incorrectly installed batteries. Obstruction between remote and AC unit. Remote out of range. Replace batteries, ensuring correct polarity. Remove any obstructions. Ensure remote is within effective range of the AC unit.
AC unit responds intermittently. Weak batteries. Infrared sensor on AC unit is dirty or obstructed. Replace batteries. Clean the infrared sensor on the AC unit.
Remote functions are incorrect or limited. Remote may not be fully compatible with your specific AC model. Verify your AC unit's model number against the remote's compatibility list.

5. Specifications

Feature Detail
Model Number YKR-H/102E (Replaces YKR-H/006E, YKR-H/101E)
Wireless Communication Infrared (IR)
Intended Use Air Conditioner Remote Control
Compatible Brands AUX, AUXIA (Note: Product data also mentions compatibility with some Toshiba LED TV models, but the primary use is for AC units.)
Dimensions (L x W x T) 13.3 cm (5.23 in) x 5.5 cm (2.16 in) x 1.5 cm (0.59 in)
Weight Approximately 0.1 kg
Power Source 2 x AAA Batteries (not included)
Origin Mainland China
Diagram showing the dimensions of the remote control: 13.3cm length, 5.5cm width, 1.5cm thickness.
Figure 4: Dimensions of the YKR-H/102E Remote Control.

6. User Tips

  • Verify Compatibility: Before purchase or if experiencing issues, always double-check that your air conditioner's model number is listed as compatible with the YKR-H/102E remote. Some users inquire about specific models like "Hiyasu YR-M07", highlighting the importance of confirming compatibility.
  • Line of Sight: Ensure there is a clear line of sight between the remote control's infrared emitter and the air conditioner's receiver for optimal performance.
  • Battery Quality: Use good quality batteries for longer life and consistent performance.

7. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the original seller or manufacturer. Keep your purchase receipt as proof of purchase.

© 2023 Product Manual. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.