1. Introduction
The DDS667 Single Phase Multifunction Energy Meter is designed for accurate measurement of electricity consumption in various applications, including homes, electric vehicles, and household appliances. This guide provides detailed instructions for installation, operation, and maintenance to ensure safe and efficient use of your energy meter.
2. Product Features
- Durable Construction: Features an excellent ABS shell resistant to aging, high temperature, deformation, and designed for long-lasting durability.
- Easy Installation: Guide rail type design for convenient installation and maintenance.
- Clear Display: LCD large screen display with high-definition digital readings for clear visibility at a glance.
- Multifunctionality: Measures voltage, current, active power (Watt), energy (kWh), and frequency.
- Versatile Application: Suitable for AC 110V (120V) and 220V (230V) systems.
3. Technical Specifications
| Parameter | Value |
|---|---|
| Model Number | DDS667 |
| Voltage | AC 110V (120V) / 220V (230V) |
| Frequency | 50Hz |
| Current | 5 (80) A |
| Size | 78.8 mm x 35.4 mm |
| Type | Module |
| Origin | Mainland China |
| Condition | New |
Dimensions:

Image: DDS667 Energy Meter dimensions (78.5mm height, 35.4mm width).
4. Package Contents
Upon opening the package, please verify that all items are present and undamaged:
- DDS667 Energy Meter x 1
- User Manual x 1
- Accessory Kit x 1

Image: Contents of the DDS667 Energy Meter package.
5. Installation and Wiring
WARNING: Installation should only be performed by qualified personnel. Ensure power is disconnected before any wiring to prevent electric shock.
The DDS667 Energy Meter is designed for DIN-rail mounting. It supports both upper inlet/lower outlet and bottom inlet/top outlet wiring configurations. This meter connection can be neutral.
5.1. Wiring Diagram: Upper Inlet and Lower Outlet

Image: Schematic diagram for connecting the energy meter with power entering from the top and exiting from the bottom. Red wires indicate the firing line, blue wires indicate the zero line. Note: This meter connection can be neutral.
Wiring Steps (Upper Inlet / Lower Outlet):
- Connect the incoming 'Firing line' (Live) to the top-left terminal of the first circuit breaker (e.g., NX-B63 C16).
- Connect the incoming 'Zero line' (Neutral) to the top-right terminal of the first circuit breaker.
- From the bottom-left terminal of the first circuit breaker, connect a wire to the 'Firing line' input (L) of the DDS667 Energy Meter.
- From the bottom-right terminal of the first circuit breaker, connect a wire to the 'Zero line' input (N) of the DDS667 Energy Meter.
- From the 'Firing line' output (L) of the DDS667 Energy Meter, connect a wire to the top-left terminal of the second circuit breaker (e.g., NXB-LE-32 C16).
- From the 'Zero line' output (N) of the DDS667 Energy Meter, connect a wire to the top-right terminal of the second circuit breaker.
- The load will be connected to the bottom terminals of the second circuit breaker.
5.2. Wiring Diagram: Bottom Inlet and Top Outlet

Image: Schematic diagram for connecting the energy meter with power entering from the bottom and exiting from the top. Red wires indicate the firing line, blue wires indicate the zero line. Note: This meter connection can be neutral.
Wiring Steps (Bottom Inlet / Top Outlet):
- Connect the incoming 'Firing line' (Live) to the bottom-left terminal of the first circuit breaker (e.g., NX-B63 C16).
- Connect the incoming 'Zero line' (Neutral) to the bottom-right terminal of the first circuit breaker.
- From the top-left terminal of the first circuit breaker, connect a wire to the 'Firing line' input (L) of the DDS667 Energy Meter.
- From the top-right terminal of the first circuit breaker, connect a wire to the 'Zero line' input (N) of the DDS667 Energy Meter.
- From the 'Firing line' output (L) of the DDS667 Energy Meter, connect a wire to the bottom-left terminal of the second circuit breaker (e.g., NXB-LE-32 C16).
- From the 'Zero line' output (N) of the DDS667 Energy Meter, connect a wire to the bottom-right terminal of the second circuit breaker.
- The load will be connected to the top terminals of the second circuit breaker.
6. Operating Instructions
The DDS667 Energy Meter features an LCD display and a 'PRESS' button for cycling through measurement parameters and resetting temporary data.
6.1. Display Modes
The LCD display cycles through various measurement parameters. Press the orange 'PRESS' button located below the screen to switch between the following displays:
- kWh: Total energy consumption (kilowatt-hours).
- Temporary kWh: Resettable energy consumption.
- F (Hz): Frequency.
- U (V): Voltage.
- I (A): Current.
- P (W): Active Power (Watt).

Image: LCD display showing various measurement parameters and the 'PRESS' button.
6.2. Resetting Temporary kWh
To reset the 'Temporary kWh' reading to zero, navigate to the 'Temporary kWh' display mode using the 'PRESS' button. Once on this screen, press and hold the 'PRESS' button for approximately 3-5 seconds until the value resets.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the meter's exterior. Do not use abrasive cleaners or solvents.
- Environment: Ensure the meter is installed in a dry, well-ventilated area, free from excessive dust, moisture, and direct sunlight.
- Inspection: Periodically check wiring connections to ensure they are secure and free from corrosion.
8. Troubleshooting
- No Display: Check power connections and ensure the circuit breaker is on. Verify that the voltage supply matches the meter's specifications (110V/220V).
- Incorrect Readings: Double-check all wiring connections according to the diagrams. Ensure the meter is correctly installed for the phase and voltage of your system.
- Button Unresponsive: Ensure the meter is powered on. If the button remains unresponsive, contact customer support.
9. User Tips
- For accurate readings, ensure all connections are tight and properly insulated.
- Consider installing the meter in an easily accessible location for convenient monitoring and resetting of temporary kWh.
- Always consult a professional electrician if you are unsure about any wiring procedures.
10. Warranty and Support
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.