1. Introduction
This manual provides detailed instructions for the QIACHIP 433MHz Universal RF Remote Control and its compatible Receiver Modules. This powerful system allows you to wirelessly control various electronic devices, offering flexibility and convenience for your smart home or automation projects.
The remote control is designed to manage up to 40 individual receiver modules by utilizing 10 distinct ID groups, each with 4 control channels (A, B, C, D buttons). This unique feature allows for comprehensive group control without interference between different ID sets.

Figure 1: QIACHIP 433MHz Remote Control and Multiple Receiver Modules
2. Product Overview
2.1 Remote Control (Model: KTid10-ABCD-4)
The remote control features a sleek design with four primary buttons (A, B, C, D) and a digital display for indicating the currently selected ID (0-9). It operates on a 433MHz frequency and is powered by a DC 12V battery.

Figure 2: QIACHIP Remote Control
2.2 Receiver Module (Models: QA-R-011/QA-R-012/QA-R-013)
The compact receiver module is designed for easy integration into various electronic circuits. It features a learning button for pairing with the remote control and supports a wide voltage input range.

Figure 3: QIACHIP Receiver Module with Learning Button
3. Setup and Installation
3.1 Wiring the Receiver Module
The receiver module requires a DC power input (IN+/IN-) and provides an output (OUT+/OUT-) to control your device. Refer to the wiring diagram below for proper connection. Ensure the power supply voltage is within the specified range of 3.6V to 24V DC.

Figure 4: Receiver Module Wiring Diagram
3.2 Pairing the Remote Control with the Receiver (Learning Mode)
To establish communication between the remote control and a receiver module, you need to pair them:
- Ensure the receiver module is powered on.
- Press and hold the Learning Button on the receiver module. The LED indicator on the receiver will typically light up or flash to indicate it's in learning mode.
- While holding the Learning Button, press the desired control button (A, B, C, or D) on your remote control.
- Release the Learning Button on the receiver. The LED indicator should turn off or change state, confirming successful pairing.
- Test the control by pressing the paired button on the remote.
Note on Working Modes: The receiver modules support different working modes (Momentary, Toggle, Latching). The specific method to set these modes usually involves pressing the learning button a certain number of times or holding it for a specific duration. Refer to the receiver module's individual documentation for detailed instructions on setting these modes, as this remote control is compatible with various receiver types.
4. Operating Instructions
4.1 Switching Remote Control IDs
The remote control can store and operate with 10 different ID groups (0-9). Each ID group functions as an independent remote control, preventing interference between different sets of paired devices.
- To switch to the next ID (upwards): Press and hold the A button, then press the C button once. The digital display will show the new ID.
- To switch to the previous ID (downwards): Press and hold the A button, then press the D button once. The digital display will show the new ID.

Figure 5: Switching ID Upwards

Figure 6: Switching ID Downwards
4.2 Controlling Devices (Group Control)
Once the remote control and receiver modules are paired to a specific ID, you can control up to 40 receivers. Each ID group can control up to 4 receivers (one per button A, B, C, D). This allows for efficient management of multiple devices across different areas or functions.

Figure 7: Group Control Application Example
Watch the video below for a demonstration of ID switching and device control:
Video 1: Demonstration of Remote Control ID Switching and Receiver Operation
5. Specifications
5.1 Remote Control Specifications
| Feature | Specification |
|---|---|
| Model | KTid10-ABCD-4 |
| Operating Frequency | 433MHz |
| Power Supply | DC 12V Battery (included) |
| Material | PVC |
| Buttons | 4 (A, B, C, D) |
| Operating Current | 12mA |
| Transmit Power | 10mW |
| Modulation Mode | ASK (AM) |
| Code Type | Learning Code |
| Transmission Distance | Approx. 100 meters (open area) |
| ID Groups | 10 (0-9) |
| Max Receivers Controlled | Up to 40 (1-way receivers) |

Figure 8: Remote Control Dimensions
5.2 Receiver Module Specifications
| Feature | Specification |
|---|---|
| Model Numbers | QA-R-011/QA-R-012/QA-R-013 |
| Working Voltage | DC 3.6V ~ 24V |
| Maximum Load | 2A |
| Static Current | 3.7mA ~ 7mA |
| Working Frequency | 433MHz |
| Reception Sensitivity | ≥ -107dBm |
| Modulation Mode | ASK (Superheterodyne) |
| Stored Remote Controls | ≤ 10 |
| Working Modes | Momentary, Toggle, Latching Mode (configurable on receiver) |
| Learning Style | Learning Button |
| Working Temperature | -20°C to 80°C |

Figure 9: Receiver Module Dimensions
6. Maintenance
- Battery Replacement (Remote Control): The remote control is powered by a DC 12V battery. If the remote's range decreases or the display becomes dim, replace the battery. Refer to the remote's casing for instructions on opening and replacing the battery.
- Cleaning: Use a soft, dry cloth to clean the remote control and receiver module. Do not use liquid cleaners or solvents.
- Storage: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
- Device not responding to remote:
- Ensure the receiver module is correctly wired and powered.
- Verify that the remote control's battery is not depleted.
- Check if the remote control's ID matches the ID the receiver is paired with.
- Re-pair the remote control and receiver module following the instructions in Section 3.2.
- Ensure the remote and receiver are within the effective transmission range (approx. 100m in open area). Obstacles like walls can significantly reduce range.
- Interference: As the system operates on 433MHz, it may be susceptible to interference from other 433MHz devices. If you experience erratic behavior, try changing the remote's ID or relocating the receiver.
8. Certifications
This product complies with relevant safety and environmental standards, including CE and RoHS certifications.

Figure 10: Product Certifications (CE, RoHS)
9. Warranty and Support
For warranty information, technical support, or further inquiries, please contact your retailer or the QIACHIP Official Store directly. Keep your purchase receipt as proof of purchase.