1. Introduction
The TOWILD ALC-01 Wireless Remote Controller is designed to provide convenient and safe control over your compatible TOWILD CL Series Smart Bike Lights. This remote allows you to effortlessly switch between various light modes without removing your hands from the handlebars, enhancing safety and usability during your rides.
Compatible Models: CL1200 PRO, CL1200, CL900, CL600, Dlite 1800.
2. Package Contents
Please check the package for the following items:
- 1x TOWILD ALC-01 Wireless Remote Controller
- 1x Mounting Strap (rubber band)
- 1x User Manual (this document)
Image: The ALC-01 remote controller, a mounting strap, and the user manual as typically found in the product package.
3. Specifications
| Feature | Detail |
|---|---|
| Brand | TOWILD |
| Model Number | ALC-01 |
| Body Material | Plastic |
| Waterproof Level | IPX8 |
| Intelligent Sensing | Yes |
| Support Dimmer | 2 - 4 Files (Light Modes) |
| Origin | Mainland China |
| Compatible Lights | TOWILD CL1200 PRO, CL1200, CL900, CL600, Dlite 1800 |
4. Setup and Installation
- Attach to Handlebar: Use the provided mounting strap to securely attach the ALC-01 remote controller to your bicycle handlebar. Ensure it is positioned within easy reach for safe operation.
- Power On Light: Ensure your compatible TOWILD CL Series Smart Bike Light is powered on and within range of the remote controller.
- Automatic Connection: The ALC-01 remote controller is designed to automatically connect with compatible TOWILD CL Series Smart Bike Lights when both devices are powered on and in close proximity. No manual pairing is typically required.
Image: The remote controller securely mounted on a bike handlebar, ready for use.
5. Operating Instructions
The ALC-01 remote controller features three distinct buttons for controlling your bike light:
Image: Top view of the ALC-01 remote controller, highlighting the three control buttons.
- Power/Mode Cycle Button (Square Icon):
- Short press to turn the light ON/OFF.
- Short press while the light is ON to cycle through standard lighting modes (e.g., High → Medium → Low → Off).
- Strobe/SOS Button (Lightning Bolt Icon):
- Press this button to activate special modes like Strobe or SOS, depending on your bike light's capabilities.
- Lock/Unlock Button (Lock Icon):
- This button may be used to lock the light's current mode or activate/deactivate an intelligent sensing feature, if supported by your specific bike light model. Refer to your bike light's manual for detailed functionality.
The remote controller allows you to switch between various lighting modes such as High, Medium, Low, Strobe, and SOS, as supported by your connected TOWILD bike light.
6. Charging
Information regarding the charging of the ALC-01 Wireless Remote Controller is not explicitly provided. Typically, such compact wireless controllers use a non-rechargeable coin cell battery or have a sealed rechargeable unit. If your remote stops responding, please refer to the troubleshooting section.
7. Safety Warnings
- Keep the remote controller away from children to prevent accidental injury or swallowing of small parts.
- Do not disassemble, modify, or squeeze the remote controller.
- Avoid exposing the remote controller to high temperatures or direct sunlight for extended periods.
- The remote controller has an IPX8 waterproof rating, meaning it is protected against continuous immersion in water under specified conditions. However, avoid prolonged submersion or use in extreme underwater conditions unless explicitly stated for your specific light model.
- Do not use the remote controller in flammable or explosive environments.
8. Maintenance
- Clean the surface of the remote controller with a dry, soft cloth. Do not use corrosive chemicals or abrasive cleaners.
- Store the remote controller in a dry and cool place when not in use.
- Regularly check the integrity of the mounting strap and the remote's casing to ensure continued waterproof performance and secure attachment.
9. Troubleshooting
- Remote not controlling light:
- Ensure both the remote controller and the bike light are powered on.
- Check the battery of the remote controller (if replaceable).
- Ensure the remote controller is within effective range of the bike light.
- Verify that your bike light model is compatible with the ALC-01 remote.
- Buttons unresponsive:
- Check for any physical obstruction or damage to the buttons.
- If the remote is battery-powered, consider replacing the battery.
10. User Tips
- Multiple Lights: While the ALC-01 is designed for a single light, some users inquire about controlling multiple lights. Compatibility for controlling two lights simultaneously may vary and is not guaranteed. Please refer to the specific documentation of your TOWILD bike lights for multi-device control capabilities.
- Waterproof Confidence: The IPX8 rating provides excellent water resistance. However, always ensure the remote is properly sealed and avoid unnecessary prolonged submersion to maximize its lifespan.
11. Warranty and Support
TOWILD provides after-sales support for non-human quality problems in accordance with platform rules. Please note the following:
- Damage caused by improper use, unauthorized disassembly, water immersion (beyond specified IPX8 rating), or collision is not covered by free service.
- For any issues or support, please contact the TOWILD Official Store or the platform's customer service.
For further details, you may refer to the official user manual PDF: TOWILD ALC-01 User Manual (PDF)
