BAOFENG UV-5R Plus

Contents

Baofeng UV-5R Plus 15W UHF/VHF Tri-Power Walkie Talkie User Manual

Model: UV-5R Plus | Brand: BAOFENG

1. Introduction

The Baofeng UV-5R Plus is a versatile dual-band handheld transceiver designed for reliable communication. This model features a maximum power output of 15W, offering Low, Medium, and High power settings (10W/5W/1W selectable). It supports both UHF and VHF frequencies, includes a commercial FM radio receiver, and offers various programmable functions for enhanced usability. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

2. Package Contents

Please check the box for the following items:

  • 1 x Portable Radio (Host)
  • 1 x Inductively Loaded Antenna
  • 1 x Li-ion Battery Pack
  • 1 x Charger (Desktop Cradle)
  • 1 x Power Adapter for Charger
  • 1 x Belt Clip
  • 1 x The Sling (Lanyard)
  • 1 x User's Manual

Note: The USB charger cable and headset are not included as standard accessories.

Image showing the Baofeng UV-5R Plus radio and its included accessories: host, charger, adapter, clip, box, manual, lanyard, and antenna.
Figure 2.1: Included Package Contents

3. Product Overview

3.1 Main Features

  • Dual-band handheld transceiver with LCD display
  • DTMF encoded for advanced signaling
  • High capacity Lithium-ion battery
  • Commercial FM radio receiver (65MHz~108MHz)
  • Incorporates 105 DCS codes and 50 CTCSS privacy codes (programmable)
  • VOX function (voice operated transmission) for hands-free operation
  • Alarm function for emergencies
  • Up to 128 memory channels
  • Broadband (Wide)/Narrowband (Narrow) selectable
  • High/low power selectable (10W/5W/1W)
  • Display illumination and programmable keyboard
  • Keyboard beep function
  • Dual Watch/dual reception capability
  • Selectable Frequency Step
  • OFFSET function (frequency offset for repeater access)
  • Battery saving function to extend usage time
  • Timer transmission (TOT) programmable
  • Multiple Scan Modes selection
  • Busy Channel Lock (BCL) to prevent interference
  • Built-in RX CTCSS/DCS scan
  • Built-in LED flashlight for illumination
  • Programmable by PC for custom settings
  • Squelch Level Threshold adjustable from 0 to 9
  • Cross band reception
  • Tone end of transmission
  • Built-in key lock to prevent accidental changes

3.2 Component Diagram

Diagram of the Baofeng UV-5R Plus radio with labeled components: Antenna, Knob (ON/OFF Volume), LED Display, FM/Alarm button, Frequency/Channel Mode Switch, PTT button, Flashlight Frequency Selection Key, Loudspeaker, and Band Selection Key.
Figure 3.1: Baofeng UV-5R Plus Component Overview

4. Specifications

Table 4.1: General Specifications
FeatureSpecification
Model NumberBaofeng UV-5R plus
Brand NameBAOFENG
Frequency RangeVHF: 136-174MHz (Rx/Tx), UHF: 400-520MHz (Rx/Tx), 65MHz-108MHz (Commercial FM radio reception only)
Output Power (W)10W/8W (Tri-power modes: High/Mid/Low selectable)
Storage ChannelUp to 128 channels
Battery Capacity (mAh)8800mAh (High-capacity Lithium-ion 7.4V)
Waterproof / Water-ResistantIP45 (Splash-proof, Dust-proof, Shock-proof)
Dimensions (L*W*H)110 x 58 x 32mm (not including antenna)
WeightApprox. 130g
Frequency Stability2.5ppm
Frequency Step2.5/5/6.25/10/12.5/25KHz
Antenna Impedance50 OHM
Operating Temperature-20°C to 60°C
Consumption in Standby<= 75mA
Consumption in Reception380mA
Consumption in Transmission<= 1.4A
Mode of OperationSimplex or semi-duplex
Modulation TypeFM
Maximum Deviation<= ±5KHz / <= ±2.5KHz (W/N)
Spurious Emission<-60dB
Receiver Sensitivity0.2µV (at 12 dB SINAD)
Inter Modulation60dB
Audio Output1000mW
Adjacent Channel Selectivity65/60dB
Detailed general specifications table for the Baofeng UV-5R Plus radio.
Figure 4.1: Detailed General Specifications
Image comparing 10W (Tri-power Modes High/Mid/Low) and 8W (Dual-power Modes High/Low) versions of the radio.
Figure 4.2: Power Output Modes Comparison

5. Setup Guide

5.1 Battery Installation and Charging

  1. Install the Battery: Align the battery pack with the grooves on the back of the radio and slide it upwards until it clicks into place.
  2. Attach the Antenna: Screw the inductively loaded antenna clockwise onto the connector at the top of the radio until it is finger-tight.
  3. Charging the Battery:
    • Place the radio with the battery installed into the desktop charging cradle.
    • Connect the power adapter to the charging cradle and plug it into a wall outlet.
    • The charging indicator light will show the charging status (usually red for charging, green for fully charged).

The radio supports multiple charging methods:

Image showing the USB charging port on the radio and illustrations of charging via computer, power bank, and car charger.
Figure 5.1: Multiple Charging Methods

5.2 Powering On/Off

To power on or off the radio, rotate the Knob (ON/OFF Volume) located at the top of the unit. Rotate clockwise to turn on and increase volume, counter-clockwise to decrease volume and turn off.

6. Operating Instructions

6.1 Basic Communication

  1. Select Frequency/Channel: Use the Frequency/Channel Mode Switch to toggle between VFO (Frequency Mode) and MR (Channel Mode). In VFO mode, enter frequencies directly using the keypad. In MR mode, select a stored channel.
  2. Select Band: Use the 'BAND' button to switch between VHF and UHF bands.
  3. Transmit: Press and hold the PTT (Push-To-Talk) button on the side of the radio to transmit. Speak clearly into the microphone. Release the PTT button to receive.
  4. Adjust Power: The radio supports High, Mid, and Low power settings. Refer to the user manual for specific button sequences to adjust power output.

6.2 Advanced Functions

  • VOX Function: Enable VOX for voice-activated transmission, allowing hands-free operation. Adjust VOX sensitivity in the menu.
  • FM Radio: Press the 'FM/Alarm' button to enter commercial FM radio mode (65MHz~108MHz).
  • Scan Mode: Use the 'SCAN' function to scan through frequencies or memory channels.
  • LED Flashlight: Activate the built-in LED flashlight using the dedicated Flashlight Frequency Selection Key.
  • DTMF Encoding: The radio supports DTMF encoding for various signaling purposes.
  • Alarm Function: Use the alarm function for emergency signaling.
  • PC Programming: For advanced customization, including channel programming, CTCSS/DCS settings, and other parameters, the radio can be programmed via PC using compatible software and a programming cable (not included).
Image explaining UV Dual Band: U-Band for cities and V-Band for open areas, with a background of a city and a person in an open landscape.
Figure 6.1: UV Dual Band Application
Image showing the radio's LED flashlight in use, illuminating a dark area.
Figure 6.2: LED Flashlight Feature

7. Maintenance

7.1 General Care

The Baofeng UV-5R Plus is designed with durability in mind, featuring IP45 protection, making it splash-proof, dust-proof, and shock-proof. However, proper care is still essential for longevity:

  • Avoid exposing the radio to extreme temperatures or direct sunlight for prolonged periods.
  • Keep the radio dry. If it gets wet, wipe it thoroughly with a soft, dry cloth.
  • Clean the radio's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Ensure all ports and connectors are free from dust and debris.
Image highlighting the multiple protection features of the radio: splash-proof, dust-proof, and shock-proof, shown in a complicated environment.
Figure 7.1: Durability Features

7.2 Battery Care

  • Charge the battery fully before initial use.
  • Do not overcharge or deep discharge the battery, as this can reduce its lifespan.
  • Store the battery in a cool, dry place when not in use for extended periods.
  • If the battery is not used for a long time, charge it periodically to maintain its health.

8. Troubleshooting

If you encounter issues with your Baofeng UV-5R Plus, refer to the following common problems and solutions:

Table 8.1: Common Troubleshooting Guide
ProblemPossible CauseSolution
Radio does not power onLow or dead battery; improperly installed batteryCharge the battery; ensure battery is correctly installed.
Cannot transmit or receiveIncorrect frequency/channel; antenna not connected; Busy Channel Lock (BCL) active; squelch level too highVerify frequency/channel settings; ensure antenna is securely attached; disable BCL; adjust squelch level (0-9).
Poor audio quality or staticWeak signal; incorrect CTCSS/DCS settings; antenna issueMove to an area with better signal; verify CTCSS/DCS codes match; check antenna connection.
Battery drains quicklyHigh power transmission; frequent use; aging batteryUse lower power settings when possible; enable battery saving function; consider replacing old batteries.
Keypad unresponsiveKey lock enabledDisable the built-in key lock function.

9. User Tips

  • Power Output Clarification: While the product is marketed as '15W max power', the detailed specifications and some user reports indicate actual transmit power closer to 10W/8W or even 4.5W. For critical applications, it is advisable to verify the actual output power using appropriate equipment.
  • Quantity per Purchase: Each purchase typically includes one (1) portable radio unit and its standard accessories, not a pair. If you require multiple units, please adjust your order quantity accordingly.
  • Programming Software: To unlock the full potential of your Baofeng UV-5R Plus, consider using CHIRP or other compatible programming software with a USB programming cable. This allows for easy management of channels, frequencies, and advanced settings.
  • Antenna Upgrade: For improved range and performance, some users opt for aftermarket antennas. Ensure any replacement antenna is compatible with the radio's connector type (SMA-Female).

10. Warranty and Support

For any technical assistance, warranty claims, or further inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 BAOFENG. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.