1. Introduction
The LILYGO T-ETH-Lite Development Board is a compact and versatile microcontroller board designed for various IoT and embedded applications. It is available in two primary versions: the T-ETH-LITE-ESP32 and the T-ETH-LITE-ESP32-S3. Both variants integrate an ESP32 or ESP32-S3 microcontroller, Ethernet connectivity, and a TF card slot for expanded storage. The board also supports optional POE (Power over Ethernet) and Camera shields, enhancing its functionality for network-connected and vision-based projects.
2. Specifications
The following table details the key specifications for the LILYGO T-ETH-Lite Development Board variants:
| Feature | T-ETH-LITE-ESP32 | T-ETH-LITE-ESP32-S3 |
|---|---|---|
| MCU | ESP32-WROVER-E | ESP32-S3-WROOM-1 |
| Memory | Flash: 16MB, PSRAM: 8MB | |
| Ethernet Controller | RTL8201 | W5500 |
| Wireless Connectivity | Wi-Fi: 802.11 b/g/n, BR/EDR V4.2 + BLE | Wi-Fi: 802.11 b/g/n, BLE 5 + Bluetooth mesh |
| Onboard Features | Ethernet, TF Card Slot | |
| Buttons | Reset, Boot | |
| Supported Shields | POE-Shield | POE-Shield, Camera-Shield |
| Dimensions (approx.) | Length: 5.9cm, Width: 2.8cm, Height: 1.1cm | |
Note: The 'Compatible Audio & Video Equipment Style: Professional Audio Equipment' property is a general classification and may not directly reflect specific audio/video capabilities of the development board itself.
3. Components and Pinout
The LILYGO T-ETH-Lite boards feature a compact design with accessible pins for development. Key components include the ESP32/ESP32-S3 module, an Ethernet port, and a TF card slot. Optional shields can be connected to expand functionality.
3.1. T-ETH-LITE-ESP32 Board Overview


3.2. T-ETH-LITE-ESP32-S3 Board Overview

3.3. Pinout Diagrams
Understanding the pinout is crucial for connecting peripherals and programming the board.


3.4. Optional Shields
The T-ETH-Lite series supports modular expansion through shields.
3.4.1. POE-Shield
The POE-Shield allows the development board to be powered via an Ethernet cable, simplifying wiring in network installations.


3.4.2. Camera-Shield (for ESP32-S3 variant)
The Camera-Shield adds imaging capabilities to the T-ETH-LITE-ESP32-S3 board, suitable for surveillance or vision-based projects.



4. Setup Instructions
4.1. Initial Connection and Power
- Power Supply: The T-ETH-Lite board requires a 5V power supply. This can typically be provided via the 5V-IN pin or through a connected USB-to-TTL programmer.
- USB-to-TTL Programmer: Please note that the T-ETH-Lite board does not include an onboard USB-to-Serial converter. A separate USB-to-TTL programmer (e.g., CH340G, FT232RL) is required for programming and serial communication. Connect the programmer's TX, RX, GND, and 5V pins to the corresponding pins on the T-ETH-Lite board.
- Ethernet Connection: Connect a standard Ethernet cable to the RJ45 port for wired network access.
- TF Card Insertion: Insert a formatted TF card into the designated slot if you plan to use external storage.
4.2. Programming Environment Setup
To program the LILYGO T-ETH-Lite board, you will need to set up a development environment such as the Arduino IDE or ESP-IDF. Detailed instructions and sample code can be found on the official LILYGO GitHub repository:
4.3. Shield Installation
If using optional shields:
- POE-Shield: Align the pins of the POE-Shield with the corresponding POE interface pins on the T-ETH-Lite board and gently press to connect. Ensure correct orientation to avoid damage.
- Camera-Shield: For the T-ETH-LITE-ESP32-S3, connect the Camera-Shield to the dedicated camera interface. Refer to the pinout diagram (Figure 10) for correct connections.
5. Operating Instructions
5.1. Basic Operation
- Power On: Once connected to a 5V power source, the board will power on.
- Reset Button: Press the 'RST' button to perform a hardware reset of the microcontroller.
- Boot Button: The 'BOOT' button is typically used to put the ESP32/ESP32-S3 into bootloader mode for flashing new firmware. Hold 'BOOT', press and release 'RST', then release 'BOOT'.
5.2. Network Connectivity (Ethernet & Wi-Fi)
Utilize the provided sample code from the GitHub repository to configure Ethernet and Wi-Fi connectivity. The Ethernet module allows for stable wired network communication, while the integrated Wi-Fi and Bluetooth provide wireless capabilities for various IoT applications.
5.3. TF Card Usage
The TF card slot can be used for data logging, storing web server assets, or other applications requiring non-volatile storage. Ensure the TF card is properly formatted (e.g., FAT32) before use.
5.4. Shield-Specific Operations
- POE-Shield: When the POE-Shield is connected and an IEEE802.3af compliant POE injector or switch is used, the board will draw power directly from the Ethernet cable.
- Camera-Shield: For the Camera-Shield, refer to the sample code for camera initialization, image capture, and streaming functionalities. The IR-Cut feature automatically switches between day and night modes.
6. Maintenance
- Handling: Always handle the development board with care, avoiding static discharge. It is recommended to use anti-static precautions when working with the board.
- Cleaning: If necessary, gently clean the board with a soft, dry brush or compressed air. Avoid using liquids or harsh chemicals.
- Storage: Store the board in a dry, cool environment, away from direct sunlight and extreme temperatures.
- Firmware Updates: Regularly check the LILYGO GitHub repository for updated firmware, libraries, and documentation to ensure optimal performance and access to new features.
7. Troubleshooting
- Board Not Powering On:
- Ensure the 5V power supply is correctly connected and providing sufficient current.
- Verify that the USB-to-TTL programmer is functioning correctly if used for power.
- Programming Errors:
- Double-check all wiring connections between the T-ETH-Lite board and your USB-to-TTL programmer (TX, RX, GND, 5V).
- Ensure the correct board and port are selected in your IDE.
- Make sure the board is in bootloader mode if required for flashing (hold BOOT, press/release RST, then release BOOT).
- Confirm that you have installed all necessary drivers for your USB-to-TTL programmer.
- Ethernet Connectivity Issues:
- Verify the Ethernet cable is securely connected to both the board and the network device.
- Check your network configuration in the code (IP address, gateway, subnet mask).
- If using the POE-Shield, ensure the POE injector/switch is active and compliant with IEEE802.3af.
- TF Card Not Detected:
- Ensure the TF card is fully inserted into the slot.
- Verify the TF card is formatted correctly (e.g., FAT32).
- Check your code for correct TF card initialization and file system operations.
8. User Tips
- External Programmer Required: Remember that the T-ETH-Lite board does not have an integrated USB-to-Serial converter. You will need a separate programmer like a CH340G or similar USB-to-TTL module to upload code.
- Soldering Pins: The board typically comes without pre-soldered pins. Be prepared to solder header pins or wires if you intend to connect it to a breadboard or other peripherals.
- High Build Quality: Users frequently praise the high build quality and robust packaging of LILYGO products, ensuring your board arrives safely and performs reliably.
- Explore GitHub: The LILYGO GitHub repository is an invaluable resource for sample code, documentation, and community support.
9. Warranty and Support
For technical support, detailed documentation, and sample code, please refer to the official LILYGO GitHub repository:
If you have specific questions about the product, require customization, or need further assistance, please contact LILYGO customer service directly through their official channels.