1. Introduction
This product is a high-power LED lamp bead chip characterized by high brightness, low energy consumption, and long life. It is designed for various lighting scenarios and DIY projects.
2. Safety Information
- Must be used under direct adult supervision.
- Self-disassembly is prohibited. Unauthorized personnel are not allowed to attempt self-repair.
- Do not use this product in humid or high-temperature environments.
- Avoid direct eye exposure to the beam.
- Be sure to cut off the power supply before installation to prevent electric shock.
3. Setup and Installation
- Preparation: First, ensure that the power supply voltage meets the product specifications (5V).
- Installation Work: Make sure the connected power supply is disconnected before proceeding.
- Fixed Position: Install the LED lamp beads firmly in the appropriate position.
- Wiring: Connect the wires according to the polarity markings (+ and -) on the LED board. For boards with multiple voltage options (e.g., 3V/5V), ensure correct connection to the intended voltage supply.
- Power On: The LED light panel can be used normally when connected to the power supply.
4. Operating Instructions
Once properly installed and connected to a compatible 5V power supply, the LED light panel will illuminate. No further user operation is typically required for basic functionality.
Video 1: Product showcase demonstrating various LED light panel types and their illumination.
5. Maintenance
- Avoid use in humid or high-vibration environments.
- Do not operate in high-temperature environments for a long time.
- Avoid frequent switching to extend the service life of the product.
- Unauthorized disassembly is prohibited and the product must not be disassembled.
6. Troubleshooting
| Fault Phenomenon | Possible Causes | Solutions |
|---|---|---|
| Light does not light up/flashes | The power is not connected or the contact is poor. | Check the power supply and connecting cable. |
| Overheating | Poor heat dissipation. | Improve the ventilation conditions of the installation location. |
| Uneven illumination | Improper angle of lamp beads. | Adjust the angle or replace accessories. |
7. Specifications
- Item Type: Ball
- Voltage: 5V
- Power: 1W, 3W, 5W (depending on model)
- Luminous Efficiency: 100 lm/W
- Color Temperature Range: 3000K (Warm Light), 4000K (Neutral Light), 6000K (White Light), RGB, Two-color
- Color Rendering Index (CRI): 70-80
- Rated Current: 0.3A
- Voltage Temperature Coefficient: 500
- Certification: CCC
- Origin: Mainland China
8. User Tips
- For optimal performance and longevity, ensure the LED panel is installed in a well-ventilated area to prevent overheating.
- When connecting multiple LED panels, verify that your power supply can handle the cumulative current draw.
- Consider using a dimmer switch compatible with 5V LED systems if adjustable brightness is desired for your application.
9. Warranty and Support
Warranty Period: Within one year from the date of purchase, defects caused by non-human factors can be replaced or refunded.
Customer Support: For any inquiries or assistance, please contact ICYYGO brand customer service.
A detailed user manual in PDF format is also available for download. Please refer to the seller's product page for the link.