Laser Tree LT-80W-AA-PRO

Contents

LASER TREE LT-80W-AA-PRO 10W Optical Power Laser Module with 24V Air Pump Compressor User Manual

Model: LT-80W-AA-PRO | Brand: Laser Tree

1. Introduction

Thank you for choosing the LASER TREE LT-80W-AA-PRO 10W Optical Power Laser Module with 24V Air Pump Compressor. This product is designed for DIY laser engraving and cutting applications, offering high precision and powerful performance. This manual provides essential information for safe and effective use, including setup, operation, and maintenance.

2. Safety Information

WARNING: Laser radiation can cause eye damage and skin burns. Always follow safety precautions.

  • Eye Protection: The laser module is equipped with a removable magnetic protective cover that filters blue light. While this cover allows operation without additional laser goggles, it is always recommended to use certified laser safety goggles for maximum protection during operation.
  • Ventilation: Ensure adequate ventilation in your workspace to dissipate fumes and smoke generated during engraving and cutting.
  • Flammable Materials: Keep flammable materials away from the laser's working area.
  • Supervision: Never leave the laser module operating unattended.
  • Emergency Stop: Familiarize yourself with the emergency stop procedures of your CNC machine.

3. Package Contents

Please check the package for the following items:

Laser module and air pump kit contents
Figure 3.1: Laser Module and Air Pump Kit Contents
  • Laser Module (LT-80W-AA-PRO)
  • 24V Air Pump
  • Protective Lens
  • Sliding Plate
  • Driver Adapter
  • 3 Pin Input Cable
  • L Wrench (#1.5mm)
  • Focus Fixing Plates (3mm, 4mm, 5mm)

Air Pump Specific Contents:

Air pump packing list
Figure 3.2: Air Pump Packing List
  • Low Noise Air Pump
  • PC6-M8 Nut
  • PC8-M8 Nut
  • Air Pipe (Φ6x4mm, 1pcs)
  • Air Pipe (Φ8x6mm, 1pcs)

4. Specifications

4.1. LT-80W-AA-PRO Laser Module

LT-80W-AA-PRO Module Specifications Table
Figure 4.1: LT-80W-AA-PRO Module Specifications
ParameterValue
Effect Output Power80W
Optical Power10W (±1W)
Wavelength450nm (±10nm)
Electric Power12V 3.2A (3A-3.5A), 24V 1.7A (1.5-2A)
Engraving MaterialPlywood, Pine board, Black acrylic, Leather, MDF, Ceramics, Bone, Coated glass, Mirror stainless steel, Brushed stainless steel, Stone, Bamboo, Rubber, Alumina, Solid wood
Cutting Material8-10mm Plywood, 8-10mm Pine board, 4-5mm Black acrylic, 4-5mm MDF, 5-6mm Leather
MaterialAluminum alloy
Module Size40*40*147mm
Driver ProtectionSurge protection, overvoltage protection
ApplicationLaser engraving machine
Cable3PIN 80CM
Fan Speed10000rpm
FunctionEngraving/Cutting
Focus Length45mm
Operating Temperature0-60°C
InterfaceXH2.54-3P socket
Module Weight250g
Power Adjustable0/3-12V 1-5kHz PWM modulation

4.2. 24V Air Pump Compressor

Air Pump Product Parameters Table
Figure 4.2: Air Pump Product Parameters
ParameterEU PlugAU PlugUS Plug
Voltage220V220V110V
Frequency50Hz50Hz60Hz
Power16W
Exhaust Pressure≥0.03Mpa
Exhaust Volume30L/min
Air Pipe Inner Diameter4mm (for Φ6x4mm pipe), 6mm (for Φ8x6mm pipe)
Air Pipe Outer Diameter6mm (for Φ6x4mm pipe), 8mm (for Φ8x6mm pipe)

5. Setup Guide

5.1. Laser Module Installation

Mount the LT-80W-AA-PRO laser module securely onto your compatible DIY laser engraving machine. Ensure it is firmly attached to prevent movement during operation.

5.2. Electrical Connection

Connect the 3-pin input cable from the laser module to your machine's control board. The connections are typically:

  • PWM: Pulse Width Modulation (0/5-12V, 0-5kHz)
  • GND: Ground
  • VCC: Power Supply (DC 12V/24V)
Laser module wiring diagram
Figure 5.1: Laser Module Wiring Diagram

5.3. Air Pump Connection

The air pump is crucial for clean cuts and engravings. Connect the air pump to the laser module's air nozzle using the provided air pipes and nuts.

Air pump and laser module connection diagram
Figure 5.2: Air Pump and Laser Module Connection

The air tube holder has a diameter of Φ8mm. The suggested air tube has an outer diameter of 6mm and an inner diameter of ≥4mm.

Air tube holder and suggestion
Figure 5.3: Air Tube Specifications

5.4. Focus Adjustment

Proper focus is essential for optimal engraving and cutting results. Use the provided focus fixing plates to set the correct working distance.

For Engraving:

Reference settings for engraving
Figure 5.4: Reference Settings for Engraving

For engraving, the focus fixing plate should be 7mm. The fixed focus length of the module is 45mm.

For Cutting:

Reference settings for cutting
Figure 5.5: Reference Settings for Cutting

The appropriate focus fixing plate depends on the material thickness:

Material ThicknessPlate Thickness
2mm7mm
3mm7mm
4mm5mm
5mm5mm
6mm5mm
8mm4mm

For example, if you want to cut 8mm plywood, the focus fixing plate should be 4mm.

6. Operating Instructions

6.1. General Operation

The LT-80W-AA-PRO laser module is compatible with various DIY laser engraving machines and software like LightBurn. The general workflow involves:

  1. Prepare your design in compatible software.
  2. Import the design into your laser control software (e.g., LightBurn).
  3. Set appropriate parameters for speed, power, and image mode (e.g., Ordered, Stucki, Jarvis, Atkinson, Grayscale).
  4. Ensure the material is properly placed and secured.
  5. Adjust the laser focus according to the material and task (engraving or cutting).
  6. Start the engraving/cutting process.
Video 6.1: Demonstration of LightBurn software setup and laser engraving process.

6.2. Air Assist Usage

The integrated air assist system significantly improves cutting and engraving quality by blowing away smoke and debris from the laser's path, resulting in cleaner edges and reduced burn marks.

Comparison of cuts with and without air assist
Figure 6.1: With Air Assist vs. No Air Assist

The 24V Air Pump features an adjustable airflow speed from 0-30L/min. Adjust the knob on the air pump to control the airflow as needed for your specific material and task.

Adjustable airflow speed on air pump
Figure 6.2: Adjustable Airflow Speed

6.3. Cutting Test Data Reference

The following table provides reference settings for cutting various materials:

LT-80W-AA-PRO Cutting Test Data Reference Table
Figure 6.3: LT-80W-AA-PRO Cutting Test Data Reference
MaterialThickness (mm)Working Distance (mm)Speed (mm/min)Max. Power (%)Min. Power (%)Cutting Passes
Bass Plywood2554010095%1
3536010095%1
5424010095%1
6324010095%1
8260-15010095%1
MDF3550010095%3
5415010095%2
Black Acrylic3518010095%1

7. Maintenance

  • Lens Cleaning: Regularly inspect and clean the protective lens of the laser module to ensure optimal beam quality and prevent debris buildup. Use a soft, lint-free cloth and lens cleaning solution.
  • Air Nozzle Cleaning: Ensure the air nozzle is free from obstructions to maintain effective air assist.
  • General Cleaning: Keep the laser module and air pump free from dust and debris. Use a dry cloth for external cleaning.
  • Storage: When not in use, store the laser module and air pump in a dry, clean environment away from direct sunlight and extreme temperatures.

8. Troubleshooting

  • No Laser Output: Check power connections (VCC, GND, PWM) to ensure they are secure and correctly wired. Verify that the laser control software is sending the correct signals and power settings.
  • Poor Engraving/Cutting Quality:
    • Incorrect Focus: Re-adjust the laser focus using the appropriate focus fixing plate for your material and task.
    • Insufficient Power/Speed: Adjust power and speed settings in your software. Refer to the cutting test data reference table for guidance.
    • No Air Assist: Ensure the air pump is powered on, connected correctly, and the air nozzle is not blocked.
    • Dirty Lens: Clean the protective lens.
  • Air Pump Not Working: Check the power connection of the air pump. Ensure the correct plug version (EU/US) is used for your region.
  • Overheating: Ensure the laser module's fan is operating correctly and not obstructed. Maintain proper ventilation in the workspace.

9. User Tips

  • For intricate engravings, experiment with different image modes (e.g., Stucki, Jarvis) in your software to achieve desired detail and shading.
  • Always perform small test cuts or engravings on scrap material before working on your final piece to fine-tune settings.
  • When cutting thicker materials, multiple passes at lower power settings can sometimes yield better results than a single high-power pass.
  • Keep your workspace tidy and free of small objects that could interfere with the laser's movement.

10. Warranty and Support

For any technical assistance, troubleshooting, or warranty inquiries, please contact the official Laser Tree support channel or your point of purchase. Keep your purchase receipt as proof of purchase.

© 2023 Laser Tree. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.