HORACO ZX900-AFG-SWTG018ANS

Contents

HORACO 2.5G PoE Switch 8 Port User Manual

Model: ZX900-AFG-SWTG018ANS

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your HORACO 2.5G PoE Switch. This unmanaged Ethernet switch features 8x 2.5G PoE ports and 1x 10G SFP+ slot, delivering a total PoE power budget of 100W. It is designed to meet the demands of high-performance 2.5G network devices, including WiFi 6e Access Points, VoIP Phones, Surveillance Cameras, and other PoE-powered devices. The switch supports IEEE802.3af/at standards and offers plug-and-play functionality with no complex configuration required.

HORACO 2.5G PoE Switch front view
Figure 1: Front view of the HORACO 2.5G PoE Switch, highlighting 8x 2.5G PoE ports, 1x 10G SFP+ slot, PoE priority, and 2.5Gbps rate.

2. Product Overview

The HORACO 2.5G PoE Switch is engineered for robust and efficient network performance. Key features include:

  • High-Speed Connectivity: 8x 100/1000/2500M PoE ports and 1x 10G SFP+ optical port for high-bandwidth applications.
  • Power over Ethernet (PoE): Supports IEEE802.3af (15.4W) and IEEE802.3at (30W) standards with a total PoE power budget of 100W.
  • Plug and Play: Automatic MDI/MDIX detection and rate auto-negotiation eliminate the need for manual configuration.
  • Fanless Design: Ensures quiet operation, suitable for various environments.
  • PoE Priority: Ports 1-8 support PoE priority data transmission by default, ensuring critical devices receive power first.
  • Robust Design: Features 4KV lightning protection and a high-quality chipset for stable data transmission.
  • Wide Operating Temperature: Designed to operate reliably in environments from -10°C to 50°C.
2.5Gbps High Speed Forwarding
Figure 2: The switch supports 2.5Gbps high-speed forwarding, ideal for various data-intensive applications.
Fanless Design
Figure 3: The fanless design ensures quiet operation and efficient heat dissipation through side vents.

3. Specifications

Attribute Value
Brand NameHORACO
Model NumberZX900-AFG-SWTG018ANS
Switch TypeEthernet
TypeUnmanaged POE
Number of Interfaces9 (8 PoE + 1 SFP+)
Ethernet Port8*100/1000/2500M POE port + 1*10G SFP+ port
Transmission Rate10/100/1000Mbps/2.5Gbps (2000 Mbps)
Switch Capacity (Bandwidth)60Gbps
Packet Forward Rate44.64Mpps
Communication ModeFull-Duplex & Half-Duplex
Forwarding ModeStorage & forward
Jumbo Frame12Kbytes
MAC Address Table4K
ChipsetRTL8373+RTL8224 RTL8238B
FunctionPOE
POE FunctionsPOE, Lightning Protection, Plug and Play
PoE ProtocolIEEE802.3af (15.4W), IEEE802.3at (30W)
PoE Port Output VoltageDC 44-57V
PoE Power Supply Core1/2+; 3/6-
Power Input VoltageAC 100-240V 50/60HZ
Supply PowerDC 52V 2.3A
Product Power ConsumptionMaximum 10W
Total PoE PowerMaximum 100W
Network Medium (10Base-T)Cat3, 4, 5 or above UTP/STP (≤100m)
Network Medium (100Base-TX)Cat5 or above UTP/STP (≤100m)
Network Medium (1000Base-TX)Cat5 or above UTP/STP (≤100m)
Working Temperature-10°C ~ 50°C
Storage Temperature-40°C ~ 70°C
Working Humidity10% ~ 90%, Non-condensing
Storage Humidity5% ~ 95%, Non-condensing
Product Net Weight (N.W)0.88KG
Product Gross Weight (G.W)1.38KG
Product Size (L×W×H)220mm x 161mm x 44mm
Package Size (L×W×H)315mm x 215mm x 85mm
CertificationCE, FCC, RoHS
Port Description and Key Specifications
Figure 4: Detailed port description and key product parameters.
Product Parameters Table
Figure 5: Comprehensive table of product parameters including dimensions and performance metrics.
Detailed Network and Environmental Specifications
Figure 6: Detailed specifications for network medium, PoE protocol, work environment, and physical dimensions.

4. Package Contents

The product package includes the following items:

  • 1x HORACO 2.5G PoE Switch
  • 1x Power Cord
  • 1x User Manual (this document)
  • 1x Certification Document

5. Setup Instructions

The HORACO 2.5G PoE Switch is designed for easy plug-and-play installation. No complex software configuration is required.

  1. Unpack the Switch: Carefully remove the switch and all accessories from the packaging.
  2. Connect Power: Connect the provided power cord to the switch's AC input port (AC 100-240V) and then to a suitable power outlet.
  3. Connect Network Devices:
    • For PoE-powered devices (e.g., IP cameras, WiFi 6e APs, VoIP phones), connect them directly to any of the 8x 2.5G PoE ports using Cat5e or above network cables. The switch will automatically detect and provide power.
    • For non-PoE network devices (e.g., NVR, computer), connect them to any of the 8x 2.5G PoE ports.
    • For uplink to a router or core network, use the 1x 10G SFP+ slot with a compatible SFP module/DAC/AOC, or use one of the 2.5G Ethernet ports.
  4. Verify Connections: Ensure all cables are securely connected. The switch features MDI/MDIX automatic flipping and rate auto-negotiation, simplifying cable connections.
Plug and Play Setup
Figure 7: The switch supports MDI/MDIX automatic flipping and rate auto-negotiation for easy plug-and-play setup.
Application Schematic Diagram
Figure 8: An application schematic showing typical connections for PoE cameras, IP phones, WiFi APs, NVRs, and computers.

6. Operating Instructions

  1. Power On: Once the power cord is connected, the switch will automatically power on. The power indicator LED will illuminate.
  2. Link/Activity Indicators: Each port has an indicator LED. A solid light indicates a successful link, and a flashing light indicates data activity.
  3. PoE Functionality: When a PoE-compatible device is connected to a PoE port, the switch will automatically detect and supply power according to IEEE802.3af/at standards.
  4. PoE Priority: The switch is configured with PoE priority on ports 1 through 8. This means that if the total power demand exceeds the 100W budget, power will be supplied to lower-numbered ports first. Ensure critical devices are connected to lower-numbered ports (e.g., Port 1, Port 2) if power budgeting is a concern.
PoE Priority Feature
Figure 9: Illustration of PoE priority, where ports 1-8 prioritize data transmission, useful for surveillance systems.

7. Maintenance

The HORACO 2.5G PoE Switch is designed for minimal maintenance due to its fanless operation and robust construction.

  • Cleaning: Periodically clean the exterior of the switch with a soft, dry cloth. Avoid using liquid or aerosol cleaners.
  • Ventilation: Ensure that the ventilation holes on the sides of the switch are not obstructed to allow for proper heat dissipation.
  • Environment: Operate the switch within the specified working temperature and humidity ranges (-10°C to 50°C, 10%~90% non-condensing humidity) to ensure optimal performance and longevity.
  • Cable Management: Keep network cables organized and free from excessive bends or kinks to prevent signal degradation.

8. Troubleshooting

If you encounter issues with your HORACO 2.5G PoE Switch, refer to the following basic troubleshooting steps:

  • No Power: Ensure the power cord is securely connected to both the switch and a working power outlet. Check if the power indicator LED is on.
  • No Link/Activity: Verify that the Ethernet cables are properly connected to both the switch and the network device. Check the link/activity LED for the specific port. Try a different cable or port.
  • PoE Device Not Powering On: Confirm that the connected device is PoE compatible (IEEE802.3af/at). Check the total power consumption of all connected PoE devices to ensure it does not exceed the 100W budget. If it does, consider the PoE priority settings.
  • Slow Network Speed: Ensure that all connected devices and cables support 2.5Gbps speeds for optimal performance. Check for any network congestion or faulty cables.

For more complex issues, please contact HORACO technical support.

9. User Tips

  • Placement: Due to its fanless design, the switch operates quietly, making it suitable for office or home environments where noise is a concern.
  • Cable Quality: For optimal 2.5Gbps performance, use high-quality Cat5e or Cat6 Ethernet cables.
  • PoE Budget Management: When connecting multiple PoE devices, be mindful of the 100W total power budget. Prioritize essential devices on lower-numbered ports (1-8) if necessary, as these ports have default PoE priority.
  • Environmental Resilience: The switch's high and low temperature resistant design allows it to adapt to complex and harsh environments, operating normally between -10°C and 50°C.

10. Warranty and Support

HORACO provides a 2-Year Free Warranty for this product, covering manufacturing defects and malfunctions under normal use. Additionally, customers are entitled to Lifetime Professional Technical Support. For any technical assistance or warranty claims, please contact HORACO Official Store customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.